home *** CD-ROM | disk | FTP | other *** search
Text File | 2009-12-11 | 460.4 KB | 12,877 lines |
- --=============================================================================
- --
- -- Proxim Corporation - WiFi Research and Development
- -- 935 Stewart Drive
- -- Sunnyvale, CA 94085
- -- USA
- --
- --=============================================================================
- --
- -- ORiNOCO Management Information Base (MIB)
- --
- --=============================================================================
- --
- -- FILENAME: orinoco.mib
- --
- -- DESIGNER: Daniel R. Borges (DRB)
- --
- -- TITLE: ORiNOCO Management Information Base
- --
- -- USED IN: ORiNOCO Product Line for SNMP Management. This MIB is
- -- intended for the following products:
- -- Access Point Products
- -- Broadband Gateway Products
- -- Tsunami Multi-point Products
- --
- --=============================================================================
- --
- -- Document History Information
- --
- --=============================================================================
- --
- -- Version Date Authors Decription
- --
- --=============================================================================
- -- v1.00 Aug 29 DRB, Lucent Intitial Document Creation
- -- 2000
- --=============================================================================
- -- v1.10 Sept 01 DRB, Lucent Removal of unecessary objects.
- -- 2000
- --=============================================================================
- -- v1.20 Sept 04 DRB, Lucent Correction on Ranges for IAPP
- -- 2000 Parameters.
- --=============================================================================
- -- v1.30 Sept 07 DRB, Lucent Appropriate values set fro the IAPP
- -- 2000 Parameters.
- --=============================================================================
- -- v1.40 Sept 08 NRP, Lucent Updated all objects.
- -- 2000
- --=============================================================================
- -- v1.50 Sept 12 DRB, Lucent Added objects to enable/disable the
- -- 2000 trap Groups and also added new traps.
- -- Added Session Idle Timeout object to
- -- PPP Group.
- --=============================================================================
- -- v1.60 Sept 26 DRB, Lucent Change name of group from web to HTTP.
- -- 2000 Added RG-2000 to ORiNOCO product tree.
- --=============================================================================
- -- v1.70 Oct 30 DRB, Lucent Added trap and trap variable to inform
- -- 2000 when a software task has suspended.
- --=============================================================================
- -- v1.80 Nov 15 DRB, Lucent Changed underscore characters to dashes
- -- 2000 and removed conflict between two trap
- -- variables:
- -- oriConfigurationTrapsStatus
- -- oriTrapVarTaskSuspended
- --=============================================================================
- -- v1.90 Feb 05 DRB, Lucent Sync up between ORiNOCO MIB and AS-2000
- -- 2001 MIB objects. The following changes
- -- were made:
- -- 1. Changed the following indeces from
- -- non-accessible to read-only:
- -- - oriSNMPAccessTableIndex
- -- - oriSNMPTrapHostTableIndex
- -- - oriProtocolFilterTableIndex
- -- - oriAccessControlTableIndex
- -- - oriStaticMACAddressFilterTableIndex
- -- - oriLinkIntTableIndex
- -- - oriPPPMACtoIPTableIndex
- -- - oriPPPIPPoolTableIndex
- -- - oriDHCPServerIPPoolTableIndex
- -- - oriProxyAgentAPTableIndex
- -- - oriStormThresholdIfIndex
- -- 2. Added the following objects:
- -- - oriSystemInvMgmtBSPBootloaderVersion
- -- - AS Client IPX Table
- -- 3. Change to range value of
- -- oriTFTPFileType, included all file
- -- type available on the AS-2000
- -- device. This should be reviewed
- -- and decided if going to be supported
- -- in other ORiNOCO devices.
- -- 4. Added the following objects the
- -- the Link Test Table:
- -- - oriLinkTestInterface
- -- - oriLinkTestRadioType
- -- 5. Added Access Server IAPP station
- -- table to IAPP group.
- -- 6. Added Traps for RADIUS Auth and
- -- Acct not configured.
- -- 7. Changed range on
- -- oriPPPSessionIdleTimeout object.
- --=============================================================================
- -- v2.00 Feb 13 DRB, Lucent Added the following objects to sync up
- -- 2001 AS-2000 MIB:
- -- - oriIfProfileCode
- -- - oriSystemReboot
- -- - oriSystemContactEmail
- -- - oriIfMACAddress
- -- Made Inventory Management a sub-group
- -- of System Group.
- -- Removed oriPPPNumIPPoolTableEntry from
- -- PPP group - duplicate object.
- --=============================================================================
- -- v2.01 Feb 13 DRB, Lucent Added default value to appropriate
- -- 2001 objects.
- --=============================================================================
- -- v2.02 Mar 05 DRB, Agere Following Changes have been made to the
- -- 2001 ORiNOCO MIB:
- -- 1. Created Interface group and placed
- -- wireless and ethernet interfaces as
- -- sub-group.
- -- 2. Created two tables under the
- -- wireless interface group for
- -- properties and security objects.
- -- 3. Create IP and IPX sub-group under
- -- Network group.
- -- 4. Moved DHCP Client Type into the
- -- Network IP sub-group.
- -- 5. Created Authentication and
- -- Accounting sub-groups under the
- -- RADIUS group.
- -- 6. Created Hardware, Software,
- -- Firmware, and BSP/BL sub-groups
- -- under System Inventory Mgmt Group.
- -- 7. Removed
- -- oriIfInvMgmtRadioFirmwareDate for it
- -- does not exist.
- -- 8. Renamed oriWirelessIfDeliveryTraffi-
- -- cIndicationMap to
- -- oriWirelessIfDTIMPeriod and made
- -- corrections to description.
- -- 9. Created Miscellaneous Trap group.
- --=============================================================================
- -- v2.03 Mar 14 DRB, Agere Following Changes have been made to the
- -- 2001 ORiNOCO MIB:
- -- 1. Add delete as an integer value to
- -- the following tables:
- -- - oriProtocolFilterTable
- -- - oriAccessControlTable
- -- - oriStaticMACAddressFilterTable
- -- 2. Added the following object required
- -- for AP-2000 software:
- -- - oriSystemContactPhoneNumber
- -- - oriProtocolFilterProtocol-
- -- Comment to Protocol Table.
- -- - oriHTTPUserName
- -- 3. Fixed range for Storm Threshold
- -- Broadcast and Multicast Objects.
- -- 4. Removed the
- -- oriStormThresholdIfIndex from
- -- Storm Threshold table. The IfIndex
- -- from MIB-II interface table shall
- -- be used.
- -- 5. Moved Gateway IP Address, default
- -- lease time, maximum lease time from
- -- DHCP group to the DHCP IP Pool
- -- Table.
- --=============================================================================
- -- v2.04 Mar 26 DRB, Agere Removed Proxy Agent Group.
- -- 2001 Specified values for
- -- oriSNMPAccessTableInterface.
- -- Added SNMPSetupStatus in order to
- -- enable/disable SNMP based Management.
- -- Added oriIAPPSendAnnounceRequestOnStart
- -- to the IAPP Group.
- -- Added the following objects to the
- -- Systems Group:
- -- - oriSystemFlashUpdate
- -- - oriSystemFlashBackupInterval
- -- - oriSystemEmergencyResetToDefault
- -- Added the following Groups:
- -- - Proxy ARP (orinocoProxyARP)
- -- - Spanning Tree (orinocoSpanningTree)
- -- - PTP (orinocoPTP)
- --=============================================================================
- -- v2.05 Mar 30 DRB, Agere Added Import of ifIndex from RFC-1213
- -- 2001 and correct object name ot ifIndex.
- --=============================================================================
- -- v2.06 Apr 03 DRB, Agere Removed the
- -- 2001 oriSNMPTestReadWritepassword from the
- -- MIB.
- --=============================================================================
- -- v2.07 Apr 10 DRB, Agere Renamed Inventory Management Objects
- -- 2001 from ComputerID to ComponentID.
- -- Defined Inventory Management Parameters
- -- for BSP/BL, ORiNOCO MIB, and Wireless
- -- Interface Cards.
- --=============================================================================
- -- v2.08 Apr 18 DRB, Agere Added Wireless Card primary firmware
- -- 2001 inventory management objects, compID,
- -- variant, major, and minor versions.
- --=============================================================================
- -- v2.09 Apr 26 DRB, Agere Changed PTP group name to WDS.
- -- 2001 Modified the Spanning Tree Status
- -- object modifying enable/disable
- -- enumeration.
- --=============================================================================
- -- v2.10 May 09 DRB, Agere Added the following Traps:
- -- 2001 oriTrapZeroSizeImage
- -- oriTrapInvalidImage
- -- oriTrapImageTooLarge
- -- oriTrapBootPFailed
- -- oriTrapDHCPFailed
- -- oriTrapDuplicateIPAddressEncountered
- -- oriTrapWLCVoltageDiscrepancy
- -- oriTrapWLCIncompatibleVendor
- -- oriTrapWLCFirmwareDonwloadFailure
- -- oriTrapWLCIncompatibleFirmware
- -- Added the following Trap Variables:
- -- oriTrapVarUnauthorizedClientMACAddress
- -- oriTrapVarWirelessCard
- -- Added object in order to enable/disable
- -- the image trap group.
- --=============================================================================
- -- v2.11 May 16 DRB, Agere Added necessary objects to support
- -- 2001 AP-2000 features/modules:
- -- oriWirelessIfLoadBalancing
- -- oriWirelessIfMediumDensityDistribution
- -- oriStaticMACAddressFilterComment
- -- oriDHCPServerIPPoolTableDNSIPAddress
- -- Added 802.1x group with one object to
- -- enable/disable this feature.
- -- Added the following traps:
- -- oriTrapIncompatibleImage
- --=============================================================================
- -- v3.00 May 18 DRB, Agere Converted MIB Definition from SMIv1 to
- -- 2001 SMIv2. Modified 802.1x group to
- -- security group and added security
- -- configuration object and encryption key
- -- length table per wireless interface.
- --=============================================================================
- -- v3.01 May 21 DRB, Agere Added RG-1100 in the product branch as
- -- 2001 orinocoproduct number 8. Updated
- -- comments to the link integrity objects.
- -- Corrected RADIUS shared secret from
- -- read-only to read-write. Added index
- -- to interface table. Created a generic
- -- inventory management table for
- -- components and component interfaces.
- --=============================================================================
- -- v3.02 May 23/24 DRB, Agere Added Protocol Packet Filter sub-group
- -- 2001 under Filtering Group. Added interface
- -- bit mask to Protocol Filtering table.
- -- Added PPPoE Group. Removed Gateway IP
- -- Address, Subnetmask, and DNS IP Address
- -- from DHCP Server Table and made them
- -- scalar objects. Added Secondary DNS IP
- -- Address in DHCP group.
- -- Added System mode to be supported by
- -- RG-2. Added Configuration File group
- -- for RG-2. Added HTTP file name
- -- table, refresh delay, and HTTP mgmt per
- -- interface in the HTTP group. Added
- -- DNS Redirect Group. Added Event Log
- -- to system group. Added an AOL group.
- -- Changed EthernetIf Settings into a
- -- table since RG-2 has two ethernet ifs.
- -- Added network IP configuration table
- -- since RG-2 has two ethernet interfaces.
- --=============================================================================
- -- v3.03 May 30 DRB, Agere Corrected oriPPPoEMACtoSessionTableISP-
- -- 2001 Name object type to DisplayString.
- --=============================================================================
- -- v3.04 June 11 DRB, Agere Updated trap description with severity
- -- 2001 level. Changed trap variables from
- -- read-only to not-accessible.
- --=============================================================================
- -- v3.05 June 20 DRB, Agere Added two new sub-groups to the DHCP
- -- 2001 group, namely server and client.
- -- Added Create State to all tables.
- -- Modified oriConfigFileName to read-only
- -- Added index to the oriPPPoESessionTable
- -- and oriPPPoEMACtoSessionTable.
- -- Changed HTTP Status and SNMP Status
- -- interface bit mask. Modified
- -- description on multicast rate.
- --=============================================================================
- -- v3.06 June 21 DRB, Agere Removed IP Address Type object, since
- -- 2001 object added to DHCP client group.
- -- Added index to EventLog Table and
- -- added create to HTTP table status
- -- object. Changed data-type of WEP keys
- -- to OCTET STRING. Added statement
- -- to description of objects that ought to
- -- be treated as write-only (masked):
- -- - Encryption Keys (WEP)
- -- - Passwords
- -- - RADIUS Shared Secret
- --=============================================================================
- -- v3.07 Oct 15 DRB, Agere Added ADSL Interface Group as a
- -- 2001 subgroup to ORiNOCO Interface.
- --=============================================================================
- -- v3.08 Oct 16, 17 DRB, Agere Changed data-type of WEP keys to
- -- 2001 DisplayString. Added object to SNMP
- -- group disable/enable the IP Access
- -- Table. Added object for Protocol
- -- Filter interface bit mask. Added the
- -- port filter sub-group to filtering
- -- group. Removed Primary and Secondary
- -- DNS IP address objects from DHCP Server
- -- group and added it to DNS group.
- -- Changed DNSRedirect group to DNS group.
- -- Changed OID of DHCP Client ID object to
- -- 1 (instead of 2). Removed DHCP Client
- -- address type since it is already in the
- -- network group. Added NAT group. Added
- -- system user name and password for HTTP
- -- and telnet access. Removed default
- -- values for network IP address, subnet
- -- mask and gateway IP address objects
- -- since it is product specific. Added
- -- manual value to PPPoE WAN Connect mode
- -- object. Added a PPPoE WAN connect mode
- -- status object. Added a Ping Test
- -- group. Added a mask for filtering the
- -- severity of the event log table.
- -- Changed the following object names:
- -- oriProtocolFilterIfMask to
- -- oriProtocolFilterInterfaceBitMask
- -- oriProtocolFilterFlag to
- -- oriProtocolFilterOperationType
- -- Added Counter64 to data type import
- -- list. Changed MAX-ACCESS of trap
- -- variables from not-accessible to
- -- read-only. Updated contact info for
- -- MIB module identity. Removed Event Log
- -- index from Event Log Table.
- --=============================================================================
- -- v3.09 Oct 22 DRB, Agere Removed the following traps:
- -- 2001 oriTrapsADSLIfProfile0Status
- -- oriTrapsADSLIfProfile1Status
- -- Added a single trap control object for
- -- ADSL interface related traps and added
- -- and ADSL trap group.
- --=============================================================================
- -- v3.10 Oct 23 DRB, Agere Changed the ADSL Interface Profile
- -- 2001 configuration to index 1 and 2.
- --=============================================================================
- -- v3.11 Oct 30 DRB, Agere Added ADSL Advanced Statistics Group
- -- 2001 and respective objects.
- --=============================================================================
- -- v3.12 Oct 31 DRB, Agere Added the following objects to the
- -- 2001 System group for Telnet and HTTP
- -- interface access:
- -- - oriSystemAccessUserName
- -- - oriSystemAccessPassword
- -- - oriSystemAccessLoginTimeout
- -- - oriSystemAccessIdleTimeout
- --=============================================================================
- -- v3.13 Dec 03 DRB, Agere Added objects for the following
- -- 2001 feature groups:
- -- - HereUare
- -- - SpectraLink VoIP
- -- - Advanced Bridging Filter
- -- Modified Proxy ARP group to IP/ARP
- -- group and added required objects for
- -- IP/ARP filtering.
- -- Changed the following table object
- -- names for consistency:
- -- - oriAccessControlMACAddress ->
- -- oriAccessControlTableMACAddress
- -- - oriAccessControlComment ->
- -- oriAccessControlTableComment
- -- - oriAccessControlEntryStatus ->
- -- oriAccessControlTableEntryStatus
- -- - oriLinkIntTableStatus ->
- -- oriLinkIntTableEntryStatus
- -- - oriWDSSetupTableStatus ->
- -- oriWDSSetupTableEntryStatus
- -- Changed default value of
- -- oriTelnetLoginTimeout to 30 seconds.
- -- Changed description of
- -- oriLinkIntPollInterval.
- -- Added oriHTTPHelpInformationLink to
- -- HTTP group.
- -- Added oriTrapWLCFirmwareFailure trap.
- -- Changed the values of the Wireless Card
- -- Distance between APs object to support
- -- UHD firmware enhancement.
- -- Added oriWirelessIfAutoChannelSelect
- -- object to Wireless If Properties table.
- --=============================================================================
- -- v3.14 Dec 18 DRB, Agere Added VLAN group and required objects.
- -- 2001 Added Primary and Secondary DNS Server
- -- IP Addresses to DHCP Server group.
- -- Updated description of Link Integrity
- -- Interval and default value definition.
- -- Default value defined for Link Test
- -- table timeout. Changed location of
- -- MODULE-IDENTITY macro to comply with
- -- SNMP v2c. Modififed IAPP
- -- Retransmission default value to 4.
- -- Modified the following object names for
- -- consistency:
- -- - oriNetworkIPXClientStatus ->
- -- oriNetworkIPXClientTableEntryStatus
- -- - oriRADIUSAuthServerStatus ->
- -- oriRADIUSAuthServerTableEntryStatus
- -- - oriRADIUSAcctServerStatus ->
- -- oriRADIUSAcctServerTableEntryStatus
- -- - oriWirelessIfEncryptionStatus ->
- -- oriWirelessIfEncryptionTableEntryStatus
- -- - oriStaticMACAddressFilterStatus ->
- -- oriStaticMACAddressFilterTableEntryStatus
- -- - oriBroadcastFilteringStatus ->
- -- oriBroadcastFilteringTableEntryStatus
- -- Added trap variable to specify the
- -- client failed authentication type.
- -- Modified enterprise OID to Agere
- -- Systems assigned OID number 11898.
- --=============================================================================
- -- v3.15 Jan 08 DRB, Agere Updated description for
- -- 2002 oriWirelessIfAllowedSupportedDataRates.
- -- Modified the VLAN group to include
- -- the following objects:
- -- - Status
- -- - Frame Types
- -- - Table of VLAN IDs
- -- Added the following groups, subgroups,
- -- and objects for the OR-2000 Product.
- -- - orinocoWORP
- -- - orinocoWORPConfiguration
- -- - orinocoWORPAuthentication
- -- - orinocoDHCPRelay
- -- Added 5 Traps for the OR-2000 Product.
- -- Changed default value for Auto Channel
- -- Select object. Modified status of
- -- oriTelnetSessions to obsolete since no
- -- longer used.
- -- Modified the following object names for
- -- consistency:
- -- - oriProtocolFilterStatus ->
- -- oriProtocolFilterTableEntryStatus
- -- - oriWirelessIfAutoChannelSelect ->
- -- oriWirelessIfAutoChannelSelectStatus
- -- - oriWirelessIfEncryptionTableEntryStatus
- -- oriWirelessIfEncryptionStatus
- --=============================================================================
- -- v3.16 Jan 28 DRB, Agere Added Textual Convention for VLAN Tag
- -- 2002 ID Type. Added VLAN Mgmt Tag ID to
- -- VLAN group. Changed the VLAN ID object
- -- type to the defined textual convention.
- -- Added the following groups, subgroups,
- -- tables, and objects for mgmt of the
- -- COR/ROR-2000 product, which could be
- -- used by other products in the future:
- -- - WORP Interface Config Subgroup and
- -- table to orinocoIf group.
- -- - WORP Statistics table to WORP
- -- Interface subgroup.
- -- - Feature based Licensing subgroup to
- -- orinocoSys and added Feature table.
- -- - Added group for monitoring station
- -- statistics, orinocoStationStats
- -- Modified the trap OIDs for conformance
- -- with SMIv2 and SNMPv2c.
- -- Removed the orinocoWORP group and
- -- subgroups since this group was moved to
- -- a subgroup for orinocoIf. Added RIP
- -- subgroup to orinocoNETRIP.
- --=============================================================================
- -- v3.17 Feb 04 DRB, Agere Added Textual convention for Interface
- -- 2002 Bitmask object.
- -- Updated the description for the
- -- following objects:
- -- - oriSystemMode
- -- - oriHTTPWebsiteNameTable
- -- - oriHTTPWebSitenameTableIndex
- -- - oriHTTPWebSiteFilename
- -- - oriHTTPWebSiteLanguage
- -- - oriHTTPWebSiteDescription
- -- - oriHTTPWebSitenameTableStatus
- -- - oriNetworkIPConfigTable
- -- - oriSNMPAccessTableInterfaceBitmask
- -- - oriSNMPInterfaceBitmask
- -- - oriProtocolFilterInterfaceBitmask
- -- - oriPortFilterTableEntryInterfaceBitmask
- -- - oriTelnetInterfaceBitmask
- -- - oriHTTPInterfaceBitmask
- -- - oriSystemFeatureTable
- -- - oriSystemFeatureTableEnry
- -- - oriWORPIfConfigTableRegistrationTimeout
- -- - oriWORPIfConfigTableRetries
- -- Corrected the Notification Type OID.
- -- Removed VLAN Frame Type Object and
- -- reassigned OIDs to VLAN groups.
- --=============================================================================
- -- v3.18 Feb 05 DRB, Agere Added Tx Rate control to Wireless
- -- 2002 interface table.
- --=============================================================================
- -- v3.19 Feb 21 DRB, Agere Corrected enumerated values for station
- -- 2002 statistics table station type. Added
- -- object for enabling/disabling
- -- monitoring station statistics.
- --=============================================================================
- -- v3.20 Mar 25 DRB, Agere Merge between previous MIB version and
- -- 2002 BG MIB.
- -- Added TEXTUAL-CONVENTION,
- -- MODULE-COMPLIANCE, and OBJECT-GROUP.
- -- Modified INTEGER to Integer32 for the
- -- VlanId textual convention.
- -- Changed module identity and the
- -- MIB tree structure.
- -- Added oriSystemAccessMaxSessions to the
- -- orinocoSys group.
- -- Modified the enumerated values for the
- -- oriTFTPFileType object.
- -- Added the following object for
- -- Bandwidth Throttling feature:
- -- - oriWirelessIfBandwidthLimitIn
- -- - oriWirelessIfBandwidthLimitOut
- -- - oriEthernetIfBandwidthLimitIn
- -- - oriEthernetIfBandwidthLimitOut
- -- Added oriDHCPClientInterfaceBitmask to
- -- DHCP Client subgroup.
- -- Removed the following WORP Traps:
- -- - oriWORPLinkDown
- -- - oriWORPRegistrationIndication
- -- - oriWORPSystemAuthenticationFailure
- -- Added the following WORP Traps:
- -- - oriWORPStationRegister
- -- - oriWORPStationDeRegister
- -- Added the following traps for System
- -- Feature based License:
- -- - oriTrapIncompatibleLicenseFile
- -- - oriTrapFeatureNotSupported
- -- - oriTrapZeroLicenseFiles
- -- - oriTrapInvalidLicenseFile
- -- - oriTrapUselessLicense
- -- Added oriTrapVarInterface to the trap
- -- variable group.
- -- Changed type from Gauge32 to Integer32
- -- and configured ranges for the following
- -- objects:
- -- - oriWORPIfStatTableAverageLocalSignal
- -- - oriWORPIfStatTableAverageLocalNoise
- -- - oriWORPIfStatTableAverageRemoteSignal
- -- - oriWORPIfStatTableAverageRemoteNoise
- -- - oriStationStatTableInSignal
- -- - oriStationStatTableInNoise
- -- - oriStationStatTableRemoteSignal
- -- - oriStationStatTableRemoteNoise
- -- Configured ranges for the following
- -- objects:
- -- - oriStationStatTableIndex
- -- Updated description for the following
- -- objects:
- -- - oriStationStatTableAdminStatus
- -- - oriStationStatTableOperStatus
- -- - oriTrapAuthenticationFailure
- -- - oriSystemFeatureTable
- -- Removed the following objects from the
- -- oriWORPIfStatTable:
- -- - oriWORPIfStatTableRegistrationAborts
- -- - oriWORPIfStatTableRequestIgnored
- -- - oriWORPIfStatTableQueueLength
- -- Added oriWORPIfConfigTableNetworkSecret
- -- to oriWORPIfTable.
- -- Removed orinocoNetRIP subgroup.
- --=============================================================================
- -- v3.21 Apr 01 DRB, Agere Updated the ADSL Interface Group with
- -- 2002 requirements provided by BG team.
- -- Changed object descriptions to be
- -- generic and providing more information.
- -- oriWirelessIfMACAddress status has been
- -- changed to deprecated.
- -- oriTelnetSessions status has been
- -- changed to deprecated.
- -- Added Trap for invalid VLAN ID
- -- configuration.
- -- Changed the data type and range for
- -- oriWirelessIfEncryptionTxKey to
- -- integer32 and size of 0-3.
- -- Removed wep enumerated value from the
- -- oriSecurityConfiguration object.
- --=============================================================================
- -- v3.22 Apr 24 DRB, Agere Added rekeying interval object to the
- -- 2002 Security Group.
- --=============================================================================
- -- v3.23 June 25 DRB, Agere Added the following groups/subgroups/
- -- 2002 objects to support AP-2000 2.1 release:
- -- - Packet Forwarding
- -- - IBSS Traffic Control
- -- - Syslog
- -- - DNS Client
- -- - Syslog
- -- Added RADIUS MAC Address format object
- -- to RADIUS group. Added RADIUS Server
- -- name and addressing type to both
- -- Authentication and Accounting RADIUS
- -- Server tables.
- --=============================================================================
- -- v3.24 June 28 DRB, Agere Changed RADIUS IP Address object status
- -- 2002 to obsolete. Added two enumerated
- -- values to PPPoE Session Connect Mode.
- -- Added object to configure the interface
- -- where the PPPoE client should try to
- -- establish a PPPoE connection.
- --=============================================================================
- -- v3.25 July 2 DRB, Agere Added default value for RADIUS Server
- -- 2002 Addressing Format. Added object to HTTP
- -- group for enabling/disabling SSL.
- --=============================================================================
- -- v3.26 July 17 DRB, Agere Added certificate to TFTP File Type
- -- 2002 Object. Added SSL password to HTTP
- -- group. Added AlphaOne to the orinoco
- -- product tree.
- --=============================================================================
- -- v3.27 July 23 DRB, Agere Added two additional values to RADIUS
- -- 2002 MAC address delimiters. Changed DNS
- -- Client status default value to disable.
- -- Removed PPPoE Connection Interface obj.
- -- Removed value from PPPoE connect mode.
- -- Added Trap for when the DNS client can
- -- not resolve a specified host name.
- -- Added Turbo Mode obj in Wireless If
- -- properties table. Updated description
- -- on the data rates obj to address Turbo
- -- mode speeds. Added value to key length
- -- table for wide-key support. Added trap
- -- for Radar Interference detected.
- -- Corrected values in the encryption key
- -- lenght table. Added object to enable
- -- or disable the HTTP setup wizard.
- --=============================================================================
- -- v3.28 Aug 20 DRB, Agere Added orinocoSNTP group and respective
- -- 2002 mgmt objs. Removed SSL and HereUare
- -- objs since not supported.
- --=============================================================================
- -- v3.29 Sept 04 DRB, Proxim Added trap for SNTP failure. Changed
- -- 2002 MIB header and Module Identity to
- -- Proxim Corporation.
- --=============================================================================
- -- v3.30 Sept 18 DRB, Proxim Removed certificate from the TFTP File
- -- 2002 type values. Removed AlwaysOnForRADIUS
- -- from the PPPoE WAN connect mode values.
- --=============================================================================
- -- v3.31 Sept 24 DRB, Proxim Add AP-25000 (SmartAP) to
- -- 2002 orinocoProducts tree. Added trap for
- -- maximum number of subscribers reached.
- --=============================================================================
- -- v3.32.0 Sept 25 DRB, Proxim Changed the default value of RADIUS
- -- 2002 Authorization Lifetime to 900.
- --=============================================================================
- -- v3.33.0 Oct 15 DRB, Proxim Corrected Index to the PPPoE Session
- -- 2002 Table. Added textual convention for
- -- status type objects. Removed default
- -- value for frequency channel since it
- -- depends on regulatory domain.
- --=============================================================================
- -- v3.34.0 Dec 05 DRB, Proxim Corrected the product name for AlphaOne
- -- 2002 project to AP-600.
- --=============================================================================
- -- v3.35.0 Dec 17 DRB, Proxim Removed 152 bit option (for 11a cards)
- -- 2002 from oriSecurityEncryptionKeyLength.
- --=============================================================================
- -- v3.36.1 March 25 DRB, Proxim Added objects to the wireless
- -- 2003 interface properties table for 802.11g
- -- feature support.
- -- Removed the following groups/objects:
- -- - oriSystemAdminState
- -- - oriSystemAdminStateTimer
- -- - orinocoADSLIf
- -- - orinocoNetIPX
- -- - orinocoECP
- -- - orinocoPPP
- -- - orinocoPing
- -- - oriIAPPTerminatePPPSessionPDUsSent
- -- - oriIAPPTerminatePPPSessionPDUsReceived
- -- - oriIAPPTerminatePPPSessionACKsSent
- -- - oriIAPPTerminatePPPSessionACKsReceived
- -- - oriTrapIPAddrAssignmentNotConfigured
- -- - oriTrapWINSIPNotConfigured
- -- - oriTrapChangeInAdminState
- -- - oriADSLIfTraps
- --=============================================================================
- -- v3.36.2 April 04 DRB, Proxim Udpate description Allowed TxRates and
- -- 2003 TxRate object to reflect 802.11g data
- -- rates. Added object to display the
- -- supported wireless operational modes.
- -- Corrected UTC time format in MIB
- -- module identity.
- --=============================================================================
- -- v3.36.3 April 04 DRB, Proxim Added 802.11a only mode to operational
- -- 2003 modes and corrected enumerated values.
- --=============================================================================
- -- v3.36.4 April 17 DRB, Proxim Changed multicast rate values and added
- -- 2003 new object for supported multicast
- -- rates. Added wireless operational
- -- mode value. Changed syntax of
- -- preamble type to DisplayString.
- --=============================================================================
- -- v3.36.5 April 21 DRB, Proxim Corrected typo with wireless
- -- 2003 operational mode object.
- --=============================================================================
- -- v3.36.6 May 1 DRB, Proxim Deprecated deny-non encrypted data obj.
- -- 2003 Added range for DHCP server lease
- -- times. Updated description for
- -- encryption options and regulatory
- -- domain list objects.
- --=============================================================================
- -- v3.36.7 May 1 DRB, Proxim Changed range for RADIUS (Auth and
- -- 2003 Acct) server maximum retransmission.
- --=============================================================================
- -- v3.37.0 May 16 DRB, Proxim Modified Textual convention for Vlanid.
- -- 2003 Modified range for DTIM Period to
- -- 1-255. Added Wireless Interface SSID
- -- table. Added new value for ethernet
- -- interface speed and transmission mode.
- -- Deprecated old security table. Added
- -- new security table to allow security
- -- configuration per wireless NIC.
- -- Deprecated VLAN table since now VLAN
- -- is configured in the SSID table.
- -- Deprecated system inventory management
- -- component interface table.
- --=============================================================================
- -- v3.37.1 June 03 DRB, Proxim Added wireless capability object.
- -- 2003 Changed oriSyslogHeartbeat to
- -- oriSyslogHeartbeatStatus.
- --=============================================================================
- -- v3.38.0 May 16 DRB, Proxim Added RAD Security Group. Added SNMPv3
- -- 2003 mgmt objects. Deprecated data rate
- -- objects in remote link test table and
- -- added new table for link test data
- -- rates. Added new value for TFTP file
- -- type to support SSL feature. Added SSL
- -- objects to the HTTP group.
- -- Added 802.11g value to monitoring
- -- station statistics MACProtocol type.
- --=============================================================================
- -- v3.39.0 June 03 DRB, Proxim Added object to system group for
- -- 2003 configuration of the country code.
- -- Added load balancing objects to
- -- wireless interface properties table.
- -- Added security mode, broadcast SSID,
- -- and closed system to SSID table.
- -- Added UPSD group and relevant objects.
- --=============================================================================
- -- v3.40.0 June 05 DRB, Proxim Added object to system group for
- -- 2003 IBSS power control. Changed default
- -- value of Link Test time out object.
- --=============================================================================
- -- v3.41.0 June 12 DRB, Proxim Added values to the SSID Table for
- -- 2003 security configuration object. Added
- -- objects security configuration table
- -- and deprecated objects that are no
- -- longer required. Corrected name of the
- -- IBSSPowerControl object.
- --=============================================================================
- -- v3.42.0 June 27 DRB, Proxim Added mgmt objects and trap for the
- -- 2003 Auto config feature for release 2.4.
- --=============================================================================
- -- v3.43.0 July 08 DRB, Proxim Added trap for an invalid digital
- -- 2003 signature when a softwre image is
- -- loaded on the access point. Added enum
- -- value to RADIUS Server Type. Changed
- -- range for RADInterval Object. Added
- -- system location object and component
- -- ELIN for Lite AP.
- --=============================================================================
- -- v3.44.0 July 18 DRB, Proxim Added range definition to following
- -- 2003 tables indices:
- -- - oriSyslogHostTableIndex
- -- - oriSNMPAccessTableIndex
- -- - oriSNMPTrapHostTableIndex
- -- - oriProtocolFilterTableIndex
- -- - oriAccessControlTableIndex
- -- - oriStaticMACAddressFilterTableIndex
- -- - oriBroadcastFilteringTableIndex
- -- - oriRADIUSAuthServerTableIndex
- -- - oriRADIUSAcctServerTableIndex
- -- - oriLinkTestTableIndex
- -- - oriLinkIntTableIndex
- -- - oriDHCPServerIPPoolTableIndex
- -- Added static WEP keys objects to SSID
- -- table.
- --=============================================================================
- -- v3.45.0 July 28 DRB, Proxim Removed System Location. Added
- -- 2003 encryption key length table to SSID
- -- table. Modified values for security
- -- mode in SSID table. Added ACS
- -- frequency band configuration to
- -- wireless interface table. Removed ELIN
- -- component object.
- --=============================================================================
- -- v3.46.0 Aug 05 DRB, Proxim Decprecated Encryption Status object
- -- 2003 in the SSID table. Updated contact
- -- info in the module identity.
- --=============================================================================
- -- v3.47.0 Aug 19 DRB, Proxim Added total number of clients object
- -- 2003 to stations statistics group.
- --=============================================================================
- -- v3.48.0 Sept 11 DRB, Proxim Changed the name of IBSS Power Control
- -- 2003 object to Tx Power Control.
- --=============================================================================
- -- v3.49.0 Sept 18 DRB, Proxim Added definition for Flanker Pro Dual
- -- 2003 radio system OID.
- --=============================================================================
- -- v3.49.1 Oct 28 DRB, Proxim Added PSK Value and PSK Passphrase
- -- 2003 objects to wireless interface SSID
- -- table.
- --=============================================================================
- -- v3.49.2 Oct 31 DRB, Proxim Changed the range and default value of
- -- 2003 the RADIUS authorization lifetime obj.
- --=============================================================================
- -- v3.49.3 Nov 03 DRB, Proxim Deprecated Wireless Interface security
- -- 2003 table and its elements, since the
- -- Wireless Interface SSID table will be
- -- used to configure the security objs.
- --=============================================================================
- -- v3.49.4 Nov 11 DRB, Proxim Added traps for last known good
- -- 2003 configuration file. Added WDS Security
- -- table and table objects. Added object
- -- wireless interface properties table for
- -- enabling/disabling security per SSID.
- --=============================================================================
- -- v3.50.0 Nov 17 DRB, Proxim Updated FP2 and FP1 product names.
- -- 2003
- --=============================================================================
- -- v3.51.0 Dec 01 DRB, Proxim Removed security per SSID status object
- -- 2003 from SSID table and security config
- -- table. Changed status of encryption
- -- key objects from read-write to
- -- read-create. Removed encryption status
- -- object from SSID table since not used.
- -- Corrected range for the wireless if
- -- load balancing objects. Deprecated
- -- objects in the security config table
- -- since not supported anymore.
- --=============================================================================
- -- v3.52.0 Dec 05 DRB, Proxim Updated RAD Interval description to
- -- 2003 include the units. Added default value
- -- for Wireless Interface ACS Band scan
- -- objected. Corrected definition of
- -- WEPKeyType textual convention. Changed
- -- enumeration of WDS Security mode.
- --=============================================================================
- -- v3.53.0 Dec 29 DRB, Proxim Added WORP Satellite Subgroups.
- -- 2003 Updated description for System Event
- -- log object for OR-2000. Changed and
- -- added values in System Feature Table.
- -- Changed status of Link Test group from
- -- deprecated to current since still
- -- supported by some ORiNOCO products.
- --=============================================================================
- -- v3.54.0 Jan 05 DRB, Proxim Modifications made to rekeying interval
- -- 2004 range in the Wireless Interface SSID
- -- table. Defined range for IP TTL obj.
- --=============================================================================
- -- v3.55.0 Jan 16 DRB, Proxim Added object to wireless interface
- -- 2004 properties table for enabling/disabling
- -- security per SSID. Changed the range
- -- of the Telnet login and session idle
- -- timeouts. Changed the default value
- -- of the login timeout to 60 seconds.
- -- Upadated descriptions of WORP Interface
- -- DDRS objects.
- --=============================================================================
- -- v3.56.0 Jan 22 DRB, Proxim Added three objects to WORP Stat Table:
- -- 2004 - Local Tx Rate
- -- - Remote Tx Rate
- -- - Table Index
- -- Added two new subgroups to WORP If:
- -- - orinocoWORPIfBSU
- -- - orinocoWORPIfBSUStat
- -- Added objects to WORP If Stat group:
- -- - MAC Address
- -- - Local Tx Rate
- -- - Remote Tx Rate
- -- - Average Local Signal
- -- - Average Local Noise
- -- - Average Remote Signal
- -- - Average Remote Noise
- --=============================================================================
- -- v3.57.0 Feb 03 DRB, Proxim Added object to SSID table for deny
- -- 2004 non encrypted data functionality.
- --=============================================================================
- -- v3.58.0 Mar 10 DRB, Proxim Added enums to the oriTFTPFileType
- -- 2004 object. Added the following new objs
- -- and traps for CLI Batch feature:
- -- - oriTrapVarBatchCliFilename
- -- - oriTrapVarBatchCliMessage
- -- - oriTrapVarBatchCliLineNo
- -- - oriTrapBatchExecFailure
- -- - oriTrapBatchFileExecStart
- -- - oriTrapBatchFileExecEnd
- -- Added the following objs to the Telnet
- -- group for SSH feature:
- -- - oriTelnetSSHStatus
- -- - oriTelnetSSHHostKeyStatus
- -- - oriTelnetSSHFingerPrint
- -- - oriTelnetRADIUSAccessControl
- -- Added oriHTTPRADIUSAccessControl to
- -- HTTP group. Changed syntax of
- -- spectralink status object to ObjStatus.
- -- Added object for spectralink legacy
- -- support. Added RAD Scan mgmt objs per
- -- FSD. Added Wireless System Shutdown
- -- mgmt objs per FSD. Added the following
- -- objs to the security group:
- -- - oriSecurityHwConfigResetStatus
- -- - oriSecurityConfigurationResetPassword
- -- Added the following objs to the RADIUS
- -- group:
- -- - oriRADIUSLocalUserStatus
- -- - oriRADIUSLocalUserPassword
- -- Added oriRADIUSAcctUpdateInterval to
- -- RADIUS accounting group. Added
- -- security profile table to security
- -- group. As a result relevant objs in
- -- the wireless interface SSID table were
- -- deprecated. Added RADIUS server
- -- profile table to RADIUS group. As a
- -- result relevant objs in the previous
- -- RADIUS Auth and Acct tables were
- -- deprecated. Added the following two
- -- objects to wireless interface
- -- properties table:
- -- - oriWirelessIfSupportedAuthenticationModes
- -- - oriWirelessIfSupportedCipherModes
- --=============================================================================
- -- v3.59.0 Mar 19 DRB, Proxim Added object to wireless interface
- -- 2004 properties table for TPC. Added
- -- security gateway group for TMP 11
- -- device. Corrected range and value of
- -- WORP DDRS objects. Added required objs
- -- to WORP Roaming group.
- -- Added trap for SSH Initialization
- -- failure. Changed range of RADIUS
- -- Authorization Lifetime object.
- -- Deprecated RADIUS Server Auth and Acct
- -- tables since RADIUS Server Profile
- -- table will now be used. Added object
- -- for configuring the RADIUS based
- -- management access RADIUS server
- -- profile.
- --=============================================================================
- -- v3.60.0 April 06 DRB, Proxim Changed the name of wireless antenna
- -- 2004 diverity management object. Added
- -- varbind to CLI Batch File Executed
- -- trap. Added description object to
- -- RADIUS server profile table.
- --=============================================================================
- -- v3.61.0 April 08 DRB, Proxim Added management objects for QoS/WME
- -- 2004 feature.
- --=============================================================================
- -- v3.62.0 May 11 DRB, Proxim Added new country codes to the system
- -- 2004 country code object.
- --=============================================================================
- -- v3.63.0 May 17 DRB, Proxim Added Traps for DHCP renewal and VLAN
- -- 2004 ID assignment by RADIUS server.
- -- Added objects to SSID table for:
- -- - SSID Authorization
- -- - MAC Access Control
- -- - RADIUS based MAC Access Control
- -- - Accounting Status
- -- Deprecated scalar objects that were
- -- introduced in SSID table.
- -- Made changes to Rogue Scan group and
- -- results table.
- -- Changed range for RADIUS Accounting
- -- update object.
- -- Made changes to CLI Batch file traps.
- -- Added object to select whih security
- -- profile will use four WEP keys.
- -- Added object for QoS/WME admission
- -- control maximum medium threshold.
- --=============================================================================
- -- v3.64.0 May 24 DRB, Proxim Removed RADIUS Profile description
- -- 2004 object. Corrected typo on RADIUS
- -- Accounting Status object in Wireless If
- -- SSID table. Changed the name of the
- -- Watch Dog Timer Trap to Unrecoverable
- -- Software Error Trap and updated the
- -- description (RFC 11911). Removed
- -- create(4) from the Link Intergrity
- -- Table Status object since this table
- -- has a static number of entries and the
- -- admin can not create an entry (RFC
- -- 12917). Enhanced the description in
- -- the security profile table specifying
- -- wireless STA types and authentication
- -- and cipher modes for each the different
- -- wirless STA types.
- --=============================================================================
- -- v3.65.0 May 24 DRB, Proxim Added variable binding for Device
- -- 2004 Rebooting trap to provide information
- -- on whether a manual reboot was issued
- -- (RFC 10762).
- --=============================================================================
- -- v3.66.0 June 09 DRB, Proxim Added object to SSID table for
- -- 2004 selecting QoS Policy. Changed the name
- -- of the CommentString textual convention
- -- to DisplayString80. Correct spelling
- -- on country name.
- --=============================================================================
- -- v3.67.0 June 16 DRB, Proxim Added DisplayString55 as textual
- -- 2004 convention. Changed or2000 product
- -- name to tmp11. Added orinocoTempLog
- -- subgroup and relevant objects to that
- -- group. Added new country codes
- -- to the system country code object.
- -- Added object to system group to
- -- identify the hardware type.
- -- Changed objects in
- -- oriWirelessIfSecurityTable to current.
- -- Modified definition of
- -- oriWirelessIfEncryptionOptions.
- -- Changed objects in
- -- orinocoRADIUSAuth and orinocoRADIUSAcct
- -- to current. Changed range for
- -- RADIUS authorization liftetime object.
- -- Added eventlog and templog to TFTP File
- -- type object. Added trap to indicate
- -- a temperature alert. Modified
- -- description of interface bitmask obj to
- -- include TMP 11. Changed TPCMode object
- -- to integer32 and modified the range.
- -- Removed objects from WORPIfConfigTable
- -- that were not used and added one obj.
- -- Added size definition for SSID obj in
- -- Wireless interface SSID table.
- --=============================================================================
- -- Version: 3.68.0
- -- Date: July 16, 2004
- -- Author: Daniel R. Borges - Proxim Corporation
- -- Changes:
- -- Removed rekeying interval object from security profile table.
- -- Changed status of rekeing object in SSID to current.
- -- Specified size for PSK passphrase and PSK value.
- -- Added varbind to reboot trap in order to provide the number of seconds
- -- until the next reboot.
- --=============================================================================
- -- Version: 3.69.0
- -- Date: July 16, 2004
- -- Author: Daniel R. Borges - Proxim Corporation
- -- Changes:
- -- Added antenna gain object to wireless interface table.
- -- Deprecated old antenna gain object in wireless interface table.
- -- Added TFTP downgrade object to TFTP group.
- --=============================================================================
- -- Version: 3.70.0
- -- Date: July 23, 2004
- -- Author: Daniel R. Borges - Proxim Corporation
- -- Changes:
- -- Changed RAD Last Scan Time object data type to TimeTicks (MR 17199).
- -- Created textual convention for DisplayString32.
- -- Changed QoS Policy name to DisplayString32.
- -- Changed SSH Trap initialization failure to initialization status.
- -- Added varbind to SSH Trap initialization status.
- -- Enhanced description of DisplayString55.
- -- Fixed naming convention of 802.1p to 802.1D mapping table and IP DSCP
- -- to 802.1D mapping table.
- -- Changed QoS Policy type object to read-only.
- -- Changed AuthMode and CipherMode in security profile table to read-only.
- --=============================================================================
- -- Version: 3.71.0
- -- Date: August 6, 2004
- -- Author: Daniel R. Borges - Proxim Corporation
- -- Changes:
- -- Changed TFTPFiletype enumeration for CLI batch file log (MR 17326).
- -- Changed PSK value in security profile table to DisplayString (MR 16331).
- --=============================================================================
-
- --
- -- COMPILERS: NuDesign, MG-Soft, VxWorks, and HP-OpenView MIB Compilers
- --
- --=============================================================================
-
- --=============================================================================
- -- Copyright (C) 2004 Proxim Corporation
- -- Proxim Corporation - PROPRIETARY
- -- Disclosure to third parties or reproduction in any from
- -- whatsoever, without prior written consent, is strictly forbiden.
- --=============================================================================
-
- --=============================================================================
- -- ORiNOCO MIB Begin
- --=============================================================================
-
- ORiNOCO-MIB DEFINITIONS ::= BEGIN
-
- --=============================================================================
- -- ORiNOCO MIB Imports
- --=============================================================================
-
- IMPORTS
-
- MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, OBJECT-IDENTITY,
- enterprises, IpAddress, Counter32, Gauge32, TimeTicks, Integer32,
- Counter64
- FROM SNMPv2-SMI
-
- DisplayString, PhysAddress, MacAddress, TruthValue, TimeStamp,
- TimeInterval, DateAndTime, RowStatus, TEXTUAL-CONVENTION
- FROM SNMPv2-TC
-
- MODULE-COMPLIANCE, OBJECT-GROUP
- FROM SNMPv2-CONF
-
- ifIndex
- FROM RFC1213-MIB;
-
- --=============================================================================
- -- ORiNOCO MIB Module Identity: orinoco
- --=============================================================================
-
- orinoco MODULE-IDENTITY
- LAST-UPDATED "0408100000Z"
- ORGANIZATION "Proxim Corporation"
- CONTACT-INFO
- "Daniel R. Borges
- Proxim Corporation
- WiFi Research and Development
- 935 Stewart Drive
- Sunnyvale, CA 94085
- USA
- Tel: +1.408.731.2654
- Fax: +1.408.731.3673
- Email: drborges@proxim.com"
- DESCRIPTION
- "MIB Definition used in the ORiNOCO Wireless Product Line:
- iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).
- agere(11898).orinoco(2)"
- ::= { agere 2 }
-
- --=============================================================================
- -- Definition of Textual Conventions
- --=============================================================================
-
- VlanId ::= TEXTUAL-CONVENTION
- STATUS current
- DESCRIPTION
- "A 12-bit VLAN ID used in the VLAN Tag header."
- SYNTAX Integer32 (-1..4094)
-
- InterfaceBitmask ::= TEXTUAL-CONVENTION
- STATUS current
- DESCRIPTION
- "An Interface Bitmask used to enable or disable access or
- functionality of an interface in the system. Each bit in this
- object represents a network interface in the system consistent
- with the ifIndex object in MIB-II. The value for this object is
- interpreted as a bitfield, where the value of 1 means enabled.
- Examples of Usage:
- 1. For a system with the following interfaces (AP-2000 & AP-4000):
- - Ethernet If = 1
- - Loopback If = 2
- - Wireless If A = 3
- - Wireless If B = 4
- Interface Bitmask usage:
- - 00000000 (0x00): All Interfaces disabled
- - 00000001 (0x01): Ethernet If enabled
- - 00000010 (0x02): All Interfaces disabled
- - 00000011 (0x03): Ethernet If enabled
- - 00000100 (0x04): Wireless If A enabled
- - 00000110 (0x06): Wireless If A enabled
- - 00001000 (0x08): Wireless If B enabled
- - 00001010 (0x0A): Wireless If B enabled
- - 00001101 (0x0D): All Interfaces enabled
- - 00001111 (0x0F): All Interfaces enabled (see Note)
- Note: The software loopback interface bit is ignored in the
- usage of the interface bitmask object.
-
- 2. For a system with the following interfaces (AP-600, AP-700 &
- Tsunami Multipoint Devices):
- - Ethernet If = 1
- - Loopback If = 2
- - Wireless If A = 3
- Interface Bitmask usage:
- - 00000000 (0x00): All Interfaces disabled
- - 00000001 (0x01): Ethernet If enabled
- - 00000010 (0x02): All Interfaces disabled
- - 00000011 (0x03): Ethernet If enabled
- - 00000100 (0x04): Wireless If A enabled
- - 00000101 (0x05): All Interfaces enabled
- - 00000110 (0x06): Wireless If A enabled
- - 00000111 (0x07): All Interfaces enabled (see Note)
- Note: The software loopback interface bit is ignored in the
- usage of the interface bitmask object.
-
- 3. For a system with the following interfaces (BG-2000):
- - Ethernet WAN If = 1
- - Ethernet LAN If = 2
- - Wireless If A = 3
- Inteface Bitmask usage:
- - 00000000 (0x00): all Interfaces disabled
- - 00000001 (0x01): Ethernet WAN If enabled
- - 00000010 (0x02): Ethernet LAN If enabled
- - 00000011 (0x03): Ethernet WAN and LAN If enabled
- - 00000100 (0x04): Wireless If A enabled
- - 00000101 (0x05): Ethernet WAN and Wireless If A enabled
- - 00000110 (0x06): Ethernet LAN and Wireless If A enabled
- - 00000111 (0x07): All Interfaces enabled"
- SYNTAX Integer32 (0..255)
-
- ObjStatus ::= TEXTUAL-CONVENTION
- STATUS current
- DESCRIPTION
- "The status textual convention is used to enable or disable
- functionality or a feature."
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
-
- WEPKeyType ::= TEXTUAL-CONVENTION
- STATUS current
- DESCRIPTION
- "The WEPKeyType textual convention is used to define the object
- type used to configured WEP Keys."
- SYNTAX DisplayString (SIZE(0..32))
-
- ObjStatusActive ::= TEXTUAL-CONVENTION
- STATUS current
- DESCRIPTION
- "The status textual convention is used to activate, deactivate, and
- delete a table row."
- SYNTAX INTEGER
- {
- active(1),
- inactive(2),
- deleted(3)
- }
-
- DisplayString80 ::= TEXTUAL-CONVENTION
- STATUS current
- DESCRIPTION
- "The DisplayString80 textual convention is used to define a
- string that can consist of 0 - 80 alphanumeric characters."
- SYNTAX DisplayString (SIZE(0..80))
-
- DisplayString55 ::= TEXTUAL-CONVENTION
- STATUS current
- DESCRIPTION
- "The DisplayString55 textual convention is used to define a
- string that can consist of 0 - 55 alphanumeric characters this textual
- convention is used for Temperature log messages."
- SYNTAX DisplayString (SIZE(0..55))
-
- DisplayString32 ::= TEXTUAL-CONVENTION
- STATUS current
- DESCRIPTION
- "The DisplayString32 textual convention is used to define a
- string that can consist of 0 - 32 alphanumeric characters."
- SYNTAX DisplayString (SIZE(0..32))
-
- --=============================================================================
- -- Definition of Agere MIB OID Tree
- --=============================================================================
-
- agere OBJECT IDENTIFIER ::= { enterprises 11898 }
-
- --=============================================================================
- -- Definition of the ORiNOCO MIB Objects: orincoObjects
- --=============================================================================
-
- orinocoObjects OBJECT IDENTIFIER ::= { orinoco 1 }
-
- --=============================================================================
- -- Definition of the ORiNOCO Notifications: orinocoNotifications
- --=============================================================================
-
- orinocoNotifications OBJECT IDENTIFIER ::= { orinoco 2 }
-
- --=============================================================================
- -- Definition of the ORiNOCO Conformance: orinocoConformance
- --=============================================================================
-
- orinocoConformance OBJECT IDENTIFIER ::= { orinoco 3 }
- orinocoGroups OBJECT IDENTIFIER ::= { orinocoConformance 1 }
- orinocoCompliances OBJECT IDENTIFIER ::= { orinocoConformance 2 }
-
- --=============================================================================
- -- Definition of the ORiNOCO Products: orinocoProducts
- --=============================================================================
-
- orinocoProducts OBJECT IDENTIFIER ::= { orinoco 4 }
-
- ap1000 OBJECT IDENTIFIER ::= { orinocoProducts 1 }
- rg1000 OBJECT IDENTIFIER ::= { orinocoProducts 2 }
- as1000 OBJECT IDENTIFIER ::= { orinocoProducts 3 }
- as2000 OBJECT IDENTIFIER ::= { orinocoProducts 4 }
- ap500 OBJECT IDENTIFIER ::= { orinocoProducts 5 }
- ap2000 OBJECT IDENTIFIER ::= { orinocoProducts 6 }
- bg2000 OBJECT IDENTIFIER ::= { orinocoProducts 7 }
- rg1100 OBJECT IDENTIFIER ::= { orinocoProducts 8 }
- tmp11 OBJECT IDENTIFIER ::= { orinocoProducts 9 }
- ap600 OBJECT IDENTIFIER ::= { orinocoProducts 10 }
- ap2500 OBJECT IDENTIFIER ::= { orinocoProducts 11 }
- ap4000 OBJECT IDENTIFIER ::= { orinocoProducts 12 }
- ap700 OBJECT IDENTIFIER ::= { orinocoProducts 13 }
-
- --=============================================================================
- -- Definition of the ORiNOCO MIB Object Groups and Subgroups
- --=============================================================================
-
- -- System Group and System Inventory Management Group
- orinocoSys OBJECT IDENTIFIER ::= { orinocoObjects 1 }
-
- -- Interface Group
- orinocoIf OBJECT IDENTIFIER ::= { orinocoObjects 2 }
-
- -- Network Group
- orinocoNet OBJECT IDENTIFIER ::= { orinocoObjects 3 }
-
- -- SNMP Group
- orinocoSNMP OBJECT IDENTIFIER ::= { orinocoObjects 4 }
-
- -- Filtering Group
- orinocoFiltering OBJECT IDENTIFIER ::= { orinocoObjects 5 }
-
- -- Remote Authentication Dial In User Service Group
- orinocoRADIUS OBJECT IDENTIFIER ::= { orinocoObjects 6 }
-
- -- Telnet Group
- orinocoTelnet OBJECT IDENTIFIER ::= { orinocoObjects 7 }
-
- -- TFTP Group
- orinocoTFTP OBJECT IDENTIFIER ::= { orinocoObjects 8 }
-
- -- Serial Group
- orinocoSerial OBJECT IDENTIFIER ::= { orinocoObjects 9 }
-
- -- Inter-Access Point Protocol Group
- orinocoIAPP OBJECT IDENTIFIER ::= { orinocoObjects 10 }
-
- -- Link Test Group
- orinocoLinkTest OBJECT IDENTIFIER ::= { orinocoObjects 11 }
-
- -- Link Integrity Group
- orinocoLinkInt OBJECT IDENTIFIER ::= { orinocoObjects 12 }
-
- -- Uplink Power Saving Devices Group
- orinocoUPSD OBJECT IDENTIFIER ::= { orinocoObjects 13 }
-
- -- Quality of Service (QoS) Group
- orinocoQoS OBJECT IDENTIFIER ::= { orinocoObjects 14 }
-
- -- Dynamic Host Configuration Protocol Group
- orinocoDHCP OBJECT IDENTIFIER ::= { orinocoObjects 15 }
-
- -- HTTP (web) Group
- orinocoHTTP OBJECT IDENTIFIER ::= { orinocoObjects 16 }
-
- -- WDS Group
- orinocoWDS OBJECT IDENTIFIER ::= { orinocoObjects 17 }
-
- -- Traps Group
- orinocoTrap OBJECT IDENTIFIER ::= { orinocoObjects 18 }
-
- -- IP/ARP Group
- orinocoIPARP OBJECT IDENTIFIER ::= { orinocoObjects 19 }
-
- -- Spanning Tree Group
- orinocoSpanningTree OBJECT IDENTIFIER ::= { orinocoObjects 20 }
-
- -- Security Group
- orinocoSecurity OBJECT IDENTIFIER ::= { orinocoObjects 21 }
-
- -- PPPoE Group
- orinocoPPPoE OBJECT IDENTIFIER ::= { orinocoObjects 22 }
-
- -- Configuration Group
- orinocoConfig OBJECT IDENTIFIER ::= { orinocoObjects 23 }
-
- -- DNS Group
- orinocoDNS OBJECT IDENTIFIER ::= { orinocoObjects 24 }
-
- -- AOL Group
- orinocoAOL OBJECT IDENTIFIER ::= { orinocoObjects 25 }
-
- -- NAT Group
- orinocoNAT OBJECT IDENTIFIER ::= { orinocoObjects 26 }
-
- -- SpectraLink VoIP Group
- orinocoSpectraLink OBJECT IDENTIFIER ::= { orinocoObjects 29 }
-
- -- VLAN Group
- orinocoVLAN OBJECT IDENTIFIER ::= { orinocoObjects 30 }
-
- -- DMZ Group
- orinocoDMZ OBJECT IDENTIFIER ::= { orinocoObjects 31 }
-
- -- OEM Group
- orinocoOEM OBJECT IDENTIFIER ::= { orinocoObjects 32 }
-
- -- Station Statistics Group
- orinocoStationStatistics OBJECT IDENTIFIER ::= { orinocoObjects 33 }
-
- -- Simple Network Time Protocol Group
- orinocoSNTP OBJECT IDENTIFIER ::= { orinocoObjects 34 }
-
- --=============================================================================
- -- Definition of the System Subgroups
- --=============================================================================
-
- -- System Inventory Management Subgroup
- orinocoSysInvMgmt OBJECT IDENTIFIER ::= { orinocoSys 1 }
-
- -- System Feature based License Subgroup
- orinocoSysFeature OBJECT IDENTIFIER ::= { orinocoSys 19 }
-
- -- System Log (Syslog) Subgroup
- orinocoSyslog OBJECT IDENTIFIER ::= { orinocoSys 21 }
-
- -- System Temperature Log Subgroup
- orinocoTempLog OBJECT IDENTIFIER ::= { orinocoSys 23 }
-
- --=============================================================================
- -- Definition of the Interface Subgroups
- --=============================================================================
-
- -- Wireless Interface Subgroup
- orinocoWirelessIf OBJECT IDENTIFIER ::= { orinocoIf 1 }
-
- -- Ethernet Interface Subgroup
- orinocoEthernetIf OBJECT IDENTIFIER ::= { orinocoIf 2 }
-
- -- WORP Interface Subgroup
- orinocoWORPIf OBJECT IDENTIFIER ::= { orinocoIf 5 }
-
- --=============================================================================
- -- Definition of the WORP Satellite Subgroups
- --=============================================================================
-
- -- This subgroup is only used for performing per-Sat config or per-Sat
- -- statistics on the base station.
- orinocoWORPIfSat OBJECT IDENTIFIER ::= { orinocoWORPIf 3 }
-
- -- This subgroup is only used for Site Survey Mode.
- orinocoWORPIfSiteSurvey OBJECT IDENTIFIER ::= { orinocoWORPIf 4 }
-
- -- This subgroup is only used for WORP Roaming.
- orinocoWORPIfRoaming OBJECT IDENTIFIER ::= { orinocoWORPIf 5 }
-
- -- This subgroup is only used for WORP DDRS.
- orinocoWORPIfDDRS OBJECT IDENTIFIER ::= { orinocoWORPIf 6 }
-
- -- This subgroup is only used for doing BSU statistics on the SU/RSU station.
- orinocoWORPIfBSU OBJECT IDENTIFIER ::= { orinocoWORPIf 7 }
-
- -- WORP Interface Satellite Config Subgroup
- orinocoWORPIfSatConfig OBJECT IDENTIFIER ::= { orinocoWORPIfSat 1 }
-
- -- WORP Interface Satellite Statistics Subgroup
- orinocoWORPIfSatStat OBJECT IDENTIFIER ::= { orinocoWORPIfSat 2 }
-
- -- WORP Interface BSU Statistics Subgroup
- orinocoWORPIfBSUStat OBJECT IDENTIFIER ::= { orinocoWORPIfBSU 1 }
-
- --=============================================================================
- -- Definition of the Network Subgroups
- --=============================================================================
-
- -- IP Network Subgroup
- orinocoNetIP OBJECT IDENTIFIER ::= { orinocoNet 1 }
-
- --=============================================================================
- -- Definition of the RADIUS Subgroups
- --=============================================================================
-
- -- RADIUS Authentication Subgroup
- orinocoRADIUSAuth OBJECT IDENTIFIER ::= { orinocoRADIUS 1 }
-
- -- RADIUS Accounting Subgroup
- orinocoRADIUSAcct OBJECT IDENTIFIER ::= { orinocoRADIUS 2 }
-
- -- RADIUS Server Profile Subgroup
- orinocoRADIUSSvrProfiles OBJECT IDENTIFIER ::= { orinocoRADIUS 10 }
-
- --=============================================================================
- -- Definition of the Filtering Subgroups
- --=============================================================================
-
- -- Protocol Filtering Subgroup
- orinocoProtocolFilter OBJECT IDENTIFIER ::= { orinocoFiltering 1 }
-
- -- Access Control Filter Subgroup
- orinocoAccessControl OBJECT IDENTIFIER ::= { orinocoFiltering 2 }
-
- -- Static MAC Address Filter Subgroup
- orinocoStaticMACAddressFilter
- OBJECT IDENTIFIER ::= { orinocoFiltering 3 }
-
- -- Storm Threshold Filter Subgroup
- orinocoStormThreshold OBJECT IDENTIFIER ::= { orinocoFiltering 4 }
-
- -- IP Packet and Port Filtering Subgroup
- orinocoPortFilter OBJECT IDENTIFIER ::= { orinocoFiltering 5 }
-
- -- Advanced Bridging Filter Subgroup
- orinocoAdvancedFiltering OBJECT IDENTIFIER ::= { orinocoFiltering 6 }
-
- -- Packet Forwarding Subgroup
- orinocoPacketForwarding OBJECT IDENTIFIER ::= { orinocoFiltering 7 }
-
- -- IBSS Traffic Control Subgroup
- orinocoIBSSTraffic OBJECT IDENTIFIER ::= { orinocoFiltering 8 }
-
- -- IntraCellBlocking Subgroup
- orinocoIntraCellBlocking OBJECT IDENTIFIER ::= { orinocoFiltering 9 }
-
- -- TMP 11 Packet Forwarding to Security Gateway Subgroup
- orinocoSecurityGw OBJECT IDENTIFIER ::= { orinocoFiltering 10 }
-
- --=============================================================================
- -- Definition of the DHCP Subgroups
- --=============================================================================
-
- -- DHCP Server Subgroup
- orinocoDHCPServer OBJECT IDENTIFIER ::= { orinocoDHCP 1 }
-
- -- DHCP Client Subgroup
- orinocoDHCPClient OBJECT IDENTIFIER ::= { orinocoDHCP 2 }
-
- -- DHCP Relay Agent Subgroup
- orinocoDHCPRelay OBJECT IDENTIFIER ::= { orinocoDHCP 3 }
-
- --=============================================================================
- -- Definition of the DNS Subgroups
- --=============================================================================
-
- -- DNS Client Subgroup
- orinocoDNSClient OBJECT IDENTIFIER ::= { orinocoDNS 5 }
-
- --=============================================================================
- -- Definition of the Security Subgroups
- --=============================================================================
-
- -- Rogue AP Detection (RAD) Subgroup
- orinocoRAD OBJECT IDENTIFIER ::= { orinocoSecurity 4 }
-
- -- Rogue Scan Subgroup
- orinocoRogueScan OBJECT IDENTIFIER ::= { orinocoSecurity 8 }
-
- --=============================================================================
- -- The System Group: orinocoSys
- --=============================================================================
-
- oriSystemReboot OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to reboot the device. The value assigned
- to this object is the number of seconds until the next reboot."
- ::= { orinocoSys 4 }
-
- oriSystemContactEmail OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to identify the email address of the
- contact person for this managed device."
- ::= { orinocoSys 5 }
-
- oriSystemContactPhoneNumber OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to identify the phone number of the
- contact person for this managed device."
- ::= { orinocoSys 6 }
-
- oriSystemFlashUpdate OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "When this variable is set, all the objects that are
- to be comitted to flash will be written to flash. This
- will be done immediately after the value is set, regardless
- of the value set."
- ::= { orinocoSys 7 }
-
- oriSystemFlashBackupInterval OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used for the backup time interval for flash
- memory to be udpated."
- ::= { orinocoSys 8 }
-
- oriSystemEmergencyResetToDefault OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to reset the device to factory default
- values. When this variable is set to 1, all the objects shall be
- set to factory default values. The default value for this object
- should be 0."
- DEFVAL { 0 }
- ::= { orinocoSys 9 }
-
- oriSystemMode OBJECT-TYPE
- SYNTAX INTEGER
- {
- bridge(1),
- gateway(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the mode the system is configured to
- operate in, either bridge or gateway/router mode."
- DEFVAL { bridge }
- ::= { orinocoSys 10 }
-
- oriSystemEventLogTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriSystemEventLogTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table contains system event log information that can include
- events, errors, and informational messages. This is a circular
- buffer with a limit 100 entries."
- ::= { orinocoSys 11 }
-
- oriSystemEventLogTableEntry OBJECT-TYPE
- SYNTAX OriSystemEventLogTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents an entry in the system event log
- table."
- INDEX { oriSystemEventLogMessage }
- ::= { oriSystemEventLogTable 1 }
-
- OriSystemEventLogTableEntry ::=
- SEQUENCE
- {
- oriSystemEventLogMessage DisplayString
- }
-
- oriSystemEventLogMessage OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used to store system event log information.
- This is also used as the index to the table."
- ::= { oriSystemEventLogTableEntry 1 }
-
- oriSystemEventLogTableReset OBJECT-TYPE
- SYNTAX Integer32 (1..1)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to reset/clear the event log table. When
- this object is the set all entries in the event log table are
- deleted/cleared."
- ::= { orinocoSys 12 }
-
- oriSystemEventLogMask OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to control what events will be logged by
- the event log facility. It is a mask, each bit is used to
- enable/disable a corresponding set of log messages.
-
- The OR2000 uses the standard syslog priorities and facilities.
- The Mask should only be set to mask specific facilities.
- The facilities are:
- LOG_KERN (0<<3) kernel messages
- LOG_USER (1<<3) random user-level messages
- LOG_MAIL (2<<3) mail system
- LOG_DAEMON (3<<3) system daemons
- LOG_AUTH (4<<3) authorization messages
- LOG_SYSLOG (5<<3) messages generated internally by syslogd
- LOG_LPR (6<<3) line printer subsystem
- LOG_NEWS (7<<3) network news subsystem
- LOG_UUCP (8<<3) UUCP subsystem
- LOG_CRON (9<<3) clock daemon
- LOG_AUTHPRIV (10<<3) authorization messages (private)
- LOG_FTP (11<<3) ftp daemon
- LOG_NTP (12<<3) NTP subsystem
- LOG_SECURITY (13<<3) security subsystems (firewalling, etc.)
- LOG_CONSOLE (14<<3) /dev/console output
-
- - other codes through 15 reserved for system use
-
- LOG_LOCAL0 (16<<3) reserved for local use
- LOG_LOCAL1 (17<<3) reserved for local use
- LOG_LOCAL2 (18<<3) reserved for local use
- LOG_LOCAL3 (19<<3) reserved for local use
- LOG_LOCAL4 (20<<3) reserved for local use
- LOG_LOCAL5 (21<<3) reserved for local use
- LOG_LOCAL6 (22<<3) reserved for local use
- LOG_LOCAL7 (23<<3) reserved for local use
-
- On the BG2000:
- Each nibble (4 bits == 1 hex digit == a nibble) represents a
- category of log messages. There are 4 levels of messages per
- category (1 bit per level per category). The least significant
- bit is a higher priority message.
- As follows:
- security - nibble 1, bits 1-4
- errors - nibble 2, bits 5-8
- system startup - nibble 3, bits 9-12
- warnings - nibble 4, bits 13-16
- information - nibble 5, bits 17-20
-
- 0x00000 - No events will be logged.
- 0x000F0 - Only errors will be logged.
- 0x0F0F0 - Warnings and errors will be logged.
- 0xFFFFF - All events will be logged."
- ::= { orinocoSys 13 }
-
- oriSystemAccessUserName OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the system access user name for the
- supported management interfaces (Telnet and HTTP)."
- ::= { orinocoSys 14 }
-
- oriSystemAccessPassword OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the system access password for the
- supported management interfaces (Telnet and HTTP). This object
- should be treated as write-only and returned as asterisks."
- ::= { orinocoSys 15 }
-
- oriSystemAccessLoginTimeout OBJECT-TYPE
- SYNTAX Integer32 (0..300)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the login timeout in seconds. The
- default value should be 60 seconds (1 minute)."
- DEFVAL { 60 }
- ::= { orinocoSys 16 }
-
- oriSystemAccessIdleTimeout OBJECT-TYPE
- SYNTAX Integer32 (0..36000)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the inactivity or idle timeout in
- seconds. The default value should be 900 seconds (15 minutes)."
- DEFVAL { 900 }
- ::= { orinocoSys 17 }
-
- oriSystemEventLogNumberOfMessages OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of messages currently stored
- in the event log table."
- ::= { orinocoSys 18 }
-
- oriSystemAccessMaxSessions OBJECT-TYPE
- SYNTAX Integer32 (0..5)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object controls the maximum number of simultaneous telnet,
- http, and serial managmenent sessions."
- ::= { orinocoSys 20 }
-
- oriSystemCountryCode OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This attribute identifies the country in which the station is
- operating. The first two octets of this string is the two character
- country code as described in document ISO/IEC 3166-1. Below is the
- list of mapping of country codes to country names.
- AL - ALBANIA
- DZ - ALGERIA
- AR - ARGENTINA
- AM - ARMENIA
- AU - AUSTRALIA
- AT - AUSTRIA
- AZ - AZERBAIJAN
- BH - BAHRAIN
- BY - BELARUS
- BE - BELGIUM
- BZ - BELIZE
- BO - BOLIVIA
- BR - BRAZIL
- BN - BRUNEI DARUSSALAM
- BG - BULGARIA
- CA - CANADA
- CL - CHILE
- CN - CHINA
- CO - COLOMBIA
- CR - COSTA RICA
- HR - CROATIA
- CY - CYPRUS
- CZ - CZECH REPUBLIC
- DK - DENMARK
- DO - DOMINICAN REPUBLIC
- EC - ECUADOR
- EG - EGYPT
- EE - ESTONIA
- FI - FINLAND
- FR - FRANCE
- GE - GEORGIA
- DE - GERMANY
- GR - GREECE
- GT - GUATEMALA
- HK - HONG KONG
- HU - HUNGARY
- IS - ICELAND
- IN - INDIA
- ID - INDONESIA
- IR - IRAN
- IE - IRELAND
- I1 - IRELAND - 5.8GHz
- IL - ISRAEL
- IT - ITALY
- JP - JAPAN
- J2 - JAPAN2
- JO - JORDAN
- KZ - KAZAKHSTAN
- KP - NORTH KOREA
- KR - KOREA REPUBLIC
- K2 - KOREA REPUBLIC2
- KW - KUWAIT
- LV - LATVIA
- LB - LEBANON
- LI - LIECHTENSTEIN
- LT - LITHUANIA
- LU - LUXEMBOURG
- MO - MACAU
- MK - MACEDONIA
- MY - MALAYSIA
- MX - MEXICO
- MC - MONACO
- MA - MOROCCO
- NL - NETHERLANDS
- NZ - NEW ZEALAND
- NO - NORWAY
- OM - OMAN
- PK - PAKISTAN
- PA - PANAMA
- PE - PERU
- PH - PHILIPPINES
- PL - POLAND
- PT - PORTUGAL
- PR - PUERTO RICO
- QA - QATAR
- RO - ROMANIA
- RU - RUSSIA
- SA - SAUDI ARABIA
- SG - SINGAPORE
- SK - SLOVAK REPUBLIC
- SI - SLOVENIA
- ZA - SOUTH AFRICA
- ES - SPAIN
- SE - SWEDEN
- CH - SWITZERLAND
- SY - SYRIA
- TW - TAIWAN
- TH - THAILAND
- TR - TURKEY
- UA - UKRAINE
- AE - UNITED ARAB EMIRATES
- GB - UNITED KINGDOM
- G1 - UNITED KINGDOM - 5.8GHz
- US - UNITED STATES
- UW - UNITED STATES - World
- U1 - UNITED STATES - DFS
- UY - URUGUAY
- VE - VENEZUELA
- VN - VIETNAM"
- ::= { orinocoSys 22 }
-
- oriSystemHwType OBJECT-TYPE
- SYNTAX INTEGER
- {
- indoor(1),
- outdoor(2)
- }
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This attribute identifies the type of TMP11 hardware i.e. Indoor
- or Outdoor."
- DEFVAL { indoor }
- ::= { orinocoSys 24 }
-
- --=============================================================================
- -- The System Inventory Management Subgroup: orinocoSysInvMgmt
- --=============================================================================
-
- oriSystemInvMgmtComponentTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriSystemInvMgmtComponentTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table contains the inventory management objects for the
- system components."
- ::= { orinocoSysInvMgmt 1 }
-
- oriSystemInvMgmtComponentTableEntry OBJECT-TYPE
- SYNTAX OriSystemInvMgmtComponentTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents an entry in the system inventory
- management component table."
- INDEX { oriSystemInvMgmtTableComponentIndex }
- ::= { oriSystemInvMgmtComponentTable 1 }
-
- OriSystemInvMgmtComponentTableEntry ::=
- SEQUENCE
- {
- oriSystemInvMgmtTableComponentIndex Integer32,
- oriSystemInvMgmtTableComponentSerialNumber DisplayString,
- oriSystemInvMgmtTableComponentName DisplayString,
- oriSystemInvMgmtTableComponentId Integer32,
- oriSystemInvMgmtTableComponentVariant Integer32,
- oriSystemInvMgmtTableComponentReleaseVersion Integer32,
- oriSystemInvMgmtTableComponentMajorVersion Integer32,
- oriSystemInvMgmtTableComponentMinorVersion Integer32
- }
-
- oriSystemInvMgmtTableComponentIndex OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the table index."
- ::= { oriSystemInvMgmtComponentTableEntry 1 }
-
- oriSystemInvMgmtTableComponentSerialNumber OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object identifies the system component serial number."
- ::= { oriSystemInvMgmtComponentTableEntry 2 }
-
- oriSystemInvMgmtTableComponentName OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object identifies the system component name."
- ::= { oriSystemInvMgmtComponentTableEntry 3 }
-
- oriSystemInvMgmtTableComponentId OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object identifies the system component identification."
- ::= { oriSystemInvMgmtComponentTableEntry 4 }
-
- oriSystemInvMgmtTableComponentVariant OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object identifies the system component variant number."
- ::= { oriSystemInvMgmtComponentTableEntry 5 }
-
- oriSystemInvMgmtTableComponentReleaseVersion OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object identifies the system component release version
- number."
- ::= { oriSystemInvMgmtComponentTableEntry 6 }
-
- oriSystemInvMgmtTableComponentMajorVersion OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object identifies the system component major version
- number."
- ::= { oriSystemInvMgmtComponentTableEntry 7 }
-
- oriSystemInvMgmtTableComponentMinorVersion OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object identifies the system component minor version
- number."
- ::= { oriSystemInvMgmtComponentTableEntry 8 }
-
- oriSystemInvMgmtTableComponentIfTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriSystemInvMgmtTableComponentIfTableEntry
- MAX-ACCESS not-accessible
- STATUS deprecated
- DESCRIPTION
- "This table contains the inventory management objects for the
- system components. This table has been deprecated."
- ::= { orinocoSysInvMgmt 2 }
-
- oriSystemInvMgmtTableComponentIfTableEntry OBJECT-TYPE
- SYNTAX OriSystemInvMgmtTableComponentIfTableEntry
- MAX-ACCESS not-accessible
- STATUS deprecated
- DESCRIPTION
- "This object represents an entry in the system component
- interface table. This object has been deprecated."
- INDEX { oriSystemInvMgmtTableComponentIndex,
- oriSystemInvMgmtInterfaceTableIndex }
- ::= { oriSystemInvMgmtTableComponentIfTable 1 }
-
- OriSystemInvMgmtTableComponentIfTableEntry ::=
- SEQUENCE
- {
- oriSystemInvMgmtInterfaceTableIndex Integer32,
- oriSystemInvMgmtInterfaceId Integer32,
- oriSystemInvMgmtInterfaceRole INTEGER,
- oriSystemInvMgmtInterfaceVariant Integer32,
- oriSystemInvMgmtInterfaceBottomNumber Integer32,
- oriSystemInvMgmtInterfaceTopNumber Integer32
- }
-
- oriSystemInvMgmtInterfaceTableIndex OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS deprecated
- DESCRIPTION
- "This object identifies the interface table index.
- This object has been deprecated."
- ::= { oriSystemInvMgmtTableComponentIfTableEntry 1 }
-
- oriSystemInvMgmtInterfaceId OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS deprecated
- DESCRIPTION
- "This object identifies the system component interface
- identification. This object has been deprecated."
- ::= { oriSystemInvMgmtTableComponentIfTableEntry 2 }
-
- oriSystemInvMgmtInterfaceRole OBJECT-TYPE
- SYNTAX INTEGER
- {
- actor(1),
- supplier(2)
- }
- MAX-ACCESS read-only
- STATUS deprecated
- DESCRIPTION
- "This object identifies the system component interface role.
- This object has been deprecated."
- ::= { oriSystemInvMgmtTableComponentIfTableEntry 3 }
-
- oriSystemInvMgmtInterfaceVariant OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS deprecated
- DESCRIPTION
- "This object identifies the system component's interface
- variant number. This object has been deprecated."
- ::= { oriSystemInvMgmtTableComponentIfTableEntry 4 }
-
- oriSystemInvMgmtInterfaceBottomNumber OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS deprecated
- DESCRIPTION
- "This object identifies the system component's interface
- bottom number. This object has been deprecated."
- ::= { oriSystemInvMgmtTableComponentIfTableEntry 5 }
-
- oriSystemInvMgmtInterfaceTopNumber OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS deprecated
- DESCRIPTION
- "This object identifies the system component's interface
- top number. This object has been deprecated."
- ::= { oriSystemInvMgmtTableComponentIfTableEntry 6 }
-
- --=============================================================================
- -- The System Feature based License Subgroup: orinocoSysFeature
- --=============================================================================
-
- oriSystemFeatureTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriSystemFeatureTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table contains a list of features that the current image
- supports and indicates if this features is licensed (enabled) or
- not (disabled). Each row represents a supported and/or licensed
- feature. Supported indicates if the current image supports the
- image while Licensed indicates that a license is available to use
- this feature. Based on the license information in this table,
- some MIB groups/subgroups/tables will be enabled or disabled."
- ::= { orinocoSysFeature 1 }
-
- oriSystemFeatureTableEntry OBJECT-TYPE
- SYNTAX OriSystemFeatureTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents an entry in the system feature license
- table."
- INDEX { oriSystemFeatureTableCode }
- ::= { oriSystemFeatureTable 1 }
-
- OriSystemFeatureTableEntry ::=
- SEQUENCE
- {
- oriSystemFeatureTableCode INTEGER,
- oriSystemFeatureTableSupported Integer32,
- oriSystemFeatureTableLicensed Integer32,
- oriSystemFeatureTableDescription DisplayString
- }
-
- oriSystemFeatureTableCode OBJECT-TYPE
- SYNTAX INTEGER
- {
- bandwidthWiFi(1),
- bandwidthWDS(2),
- bandwidthWORPUp(3),
- bandwidthTurboCell(4),
- bandwidthADSL(5),
- bandwidthCable(6),
- bandwidthPhone(7),
- maxStationsWiFi(8),
- maxLinksWDS(9),
- maxStationsWORP(10),
- maxStationsTurboCell(11),
- maxPPPoESessions(12),
- managementHTTP(13),
- remoteLinkTest(14),
- routingStatic(15),
- routingRIP(16),
- routingOSPF(17),
- spanningTreeProtocol(18),
- linkIntegrity(19),
- dHCPServer(20),
- dHCPRelayAgent(21),
- proxyARP(22),
- filteringStatic(23),
- authRADIUS(24),
- acctRADIUS(25),
- throttlingRADIUS(26),
- filterIP(27),
- ieee802dot1x(28),
- nse(29),
- iAPP(30),
- dNSRedirect(31),
- aOLNATGateway(32),
- hereUare(33),
- spectralink(34),
- vLANTagging(35),
- satMaxUsers(36),
- bandwidthWORPDown(37),
- disableSecWifiIf(38),
- initialProductType(39)
- }
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object identifies the code for the licensed feature and
- is used as index for this table."
- ::= { oriSystemFeatureTableEntry 1 }
-
- oriSystemFeatureTableSupported OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the maximum value for the feature as
- supported by the current image. For boolean features zero means
- not supported, non-zero value means supported."
- ::= { oriSystemFeatureTableEntry 2 }
-
- oriSystemFeatureTableLicensed OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the maximum value for the feature as
- enforced by the license(s). For boolean features zero means
- not licensed, non-zero value means licensed."
- ::= { oriSystemFeatureTableEntry 3 }
-
- oriSystemFeatureTableDescription OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents a textual description for the licensed
- feature."
- ::= { oriSystemFeatureTableEntry 4 }
-
- --=============================================================================
- -- The System Log (Syslog) Subgroup: orinocoSyslog
- --=============================================================================
-
- oriSyslogStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable the syslog feature."
- ::= { orinocoSyslog 1 }
-
- oriSyslogPort OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the UDP destination port number for syslog
- services. The standard syslog port is 514."
- ::= { orinocoSyslog 2 }
-
- oriSyslogPriority OBJECT-TYPE
- SYNTAX Integer32 (1..7)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the lowest message priority to be logged by
- the syslog service."
- ::= { orinocoSyslog 3 }
-
- oriSyslogHeartbeatStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable logging of heartbeat messages
- by the syslog service."
- DEFVAL { disable }
- ::= { orinocoSyslog 4 }
-
- oriSyslogHeartbeatInterval OBJECT-TYPE
- SYNTAX Integer32 (1..604800)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to configure interval (in seconds) for which
- heartbeat messages will be logged."
- DEFVAL { 900 }
- ::= { orinocoSyslog 5 }
-
- oriSyslogHostTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriSyslogHostTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table is used to configure syslog hosts."
- ::= { orinocoSyslog 6 }
-
- oriSyslogHostTableEntry OBJECT-TYPE
- SYNTAX OriSyslogHostTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents an entry for the syslog host table."
- INDEX { oriSyslogHostTableIndex }
- ::= { oriSyslogHostTable 1 }
-
- OriSyslogHostTableEntry ::=
- SEQUENCE
- {
- oriSyslogHostTableIndex Integer32,
- oriSyslogHostIPAddress IpAddress,
- oriSyslogHostComment DisplayString,
- oriSyslogHostTableEntryStatus INTEGER
- }
-
- oriSyslogHostTableIndex OBJECT-TYPE
- SYNTAX Integer32 (0..5)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents an index in the syslog host table."
- ::= { oriSyslogHostTableEntry 1 }
-
- oriSyslogHostIPAddress OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the IP address of the host running the
- syslog daemon."
- ::= { oriSyslogHostTableEntry 2 }
-
- oriSyslogHostComment OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents an optional comment for the syslog host, for
- example the host name or a reference."
- ::= { oriSyslogHostTableEntry 3 }
-
- oriSyslogHostTableEntryStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2),
- delete(3),
- create(4)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable, disable, delete, or create an
- entry in the syslog host table."
- ::= { oriSyslogHostTableEntry 4 }
-
- --=============================================================================
- -- The Temperature Log Subgroup: orinocoTempLog
- --=============================================================================
-
- oriUnitTemp OBJECT-TYPE
- SYNTAX Integer32 (-30..60)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used for the internal unit temperature in degrees
- celsius. The range of the temperature is -30 to 60 degrees celsius."
- ::= { orinocoTempLog 1 }
-
- oriTempLoggingInterval OBJECT-TYPE
- SYNTAX Integer32 (1..60)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used for logging interval. The valid values
- are 1,5,10,15,20,25,30,35,40,45,50,55,and 60."
- DEFVAL { 5 }
- ::= { orinocoTempLog 2 }
-
- oriTempLogTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriTempLogTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table contains temperature log information. This is a
- circular buffer with a limit 576 entries."
- ::= { orinocoTempLog 3 }
-
- oriTempLogTableEntry OBJECT-TYPE
- SYNTAX OriTempLogTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents an entry in the temperature log
- table."
- INDEX { oriTempLogMessage }
- ::= { oriTempLogTable 1 }
-
- OriTempLogTableEntry ::=
- SEQUENCE
- {
- oriTempLogMessage DisplayString55
- }
-
- oriTempLogMessage OBJECT-TYPE
- SYNTAX DisplayString55
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used to store temperature log information.
- This is also used as the index to the table."
- ::= { oriTempLogTableEntry 1 }
-
- oriTempLogTableReset OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used for resetting the temperature log
- table."
- DEFVAL { 0 }
- ::= { orinocoTempLog 4 }
-
- --=============================================================================
- -- The Interface Group: orinocoIf
- --=============================================================================
-
- --=============================================================================
- -- The Wireless Interface Subgroup: orinocoWirelessIf
- --=============================================================================
-
- --=============================================================================
- -- The Wireless Interface Properties Table: oriWirelessIfPropertiesTable
- --=============================================================================
-
- oriWirelessIfPropertiesTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriWirelessIfPropertiesEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table contains information on the properties and
- capabilities of the wireless interface(s) present in the device."
- ::= { orinocoWirelessIf 1 }
-
- oriWirelessIfPropertiesEntry OBJECT-TYPE
- SYNTAX OriWirelessIfPropertiesEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents the entry in the wireless interface
- properties table."
- INDEX { oriWirelessIfPropertiesIndex }
- ::= { oriWirelessIfPropertiesTable 1 }
-
- OriWirelessIfPropertiesEntry ::=
- SEQUENCE
- {
- oriWirelessIfPropertiesIndex Integer32,
- oriWirelessIfNetworkName DisplayString,
- oriWirelessIfMediumReservation Integer32,
- oriWirelessIfInterferenceRobustness INTEGER,
- oriWirelessIfDTIMPeriod Integer32,
- oriWirelessIfChannel Integer32,
- oriWirelessIfDistancebetweenAPs INTEGER,
- oriWirelessIfMulticastRate Integer32,
- oriWirelessIfClosedSystem INTEGER,
- oriWirelessIfAllowedSupportedDataRates OCTET STRING,
- oriWirelessIfRegulatoryDomainList OCTET STRING,
- oriWirelessIfAllowedChannels OCTET STRING,
- oriWirelessIfMACAddress PhysAddress,
- oriWirelessIfLoadBalancing INTEGER,
- oriWirelessIfMediumDensityDistribution INTEGER,
- oriWirelessIfTxRate Integer32,
- oriWirelessIfAutoChannelSelectStatus INTEGER,
- oriWirelessIfBandwidthLimitIn Gauge32,
- oriWirelessIfBandwidthLimitOut Gauge32,
- oriWirelessIfTurboModeStatus ObjStatus,
- oriWirelessIfSupportedOperationalModes DisplayString,
- oriWirelessIfOperationalMode INTEGER,
- oriWirelessIfPreambleType DisplayString,
- oriWirelessIfProtectionMechanismStatus ObjStatus,
- oriWirelessIfSupportedMulticastRates DisplayString,
- oriWirelessIfCapabilities OCTET STRING,
- oriWirelessIfLBTxTimeThreshold Integer32,
- oriWirelessIfLBAdjAPTimeDiffThreshold Integer32,
- oriWirelessIfACSFrequencyBandScan Integer32,
- oriWirelessIfSecurityPerSSIDStatus ObjStatus,
- oriWirelessIfDFSStatus ObjStatus,
- oriWirelessIfAntenna INTEGER,
- oriWirelessIfTPCMode Integer32,
- oriWirelessIfSuperModeStatus ObjStatus,
- oriWirelessIfWSSStatus INTEGER,
- oriWirelessIfSupportedAuthenticationModes DisplayString,
- oriWirelessIfSupportedCipherModes DisplayString,
- oriWirelessIfQoSStatus ObjStatus,
- oriWirelessIfQoSMaxMediumThreshold Integer32,
- oriWirelessIfAntennaGain Integer32
- }
-
- oriWirelessIfPropertiesIndex OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents a unique value for each interface in the
- system and is used as index to this table."
- ::= { oriWirelessIfPropertiesEntry 1 }
-
- oriWirelessIfNetworkName OBJECT-TYPE
- SYNTAX DisplayString (SIZE (1..32))
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the network name (SSID) for this wireless
- interface."
- DEFVAL { "My Wireless Network" }
- ::= { oriWirelessIfPropertiesEntry 2 }
-
- oriWirelessIfMediumReservation OBJECT-TYPE
- SYNTAX Integer32 (0..2347)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the medium reservation value. The range
- for this parameter is 0 - 2347. The medium reservation specifies
- the number of octects in a frame above which a RTS/CTS handshake is
- performed. The default value should be 2347, which disables
- RTS/CTS mode."
- DEFVAL { 2347 }
- ::= { oriWirelessIfPropertiesEntry 3 }
-
- oriWirelessIfInterferenceRobustness OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object enables or disables the interference robustness
- feature. The default value for this object should be disable."
- DEFVAL { disable }
- ::= { oriWirelessIfPropertiesEntry 4 }
-
- oriWirelessIfDTIMPeriod OBJECT-TYPE
- SYNTAX Integer32 (1..255)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the delivery traffic indication map
- period. This is the interval between the transmission of multicast
- frames on the wireless inteface. It is expressed in the Beacon
- messages. The recommended default value for this object is 1."
- DEFVAL { 1 }
- ::= { oriWirelessIfPropertiesEntry 5 }
-
- oriWirelessIfChannel OBJECT-TYPE
- SYNTAX Integer32 (1..14)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the radio frequency channel for this
- wireless interface. The default value for the channel is based on the
- regulatory domain."
- ::= { oriWirelessIfPropertiesEntry 6 }
-
- oriWirelessIfDistancebetweenAPs OBJECT-TYPE
- SYNTAX INTEGER
- {
- large(1),
- medium(2),
- small(3),
- minicell(4),
- microcell(5)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object identifies the distance between access points.
- The default value for this parameter should be large."
- DEFVAL { large }
- ::= { oriWirelessIfPropertiesEntry 7 }
-
- oriWirelessIfMulticastRate OBJECT-TYPE
- SYNTAX Integer32 (0..255)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to configure the multicast rate, but it is
- dependent on the type of wireless NIC. The value of this object is
- given in 500 Kbps units. This object can be configured to one of the
- values defined by the supported multicast rates objects
- (oriWirelessIfSupportedMulticastRates).
-
- For 802.11b Wireless NICs:
-
- This object identifies multicast rate of the wireless interface.
- This is dependent on the distance between APs. When the distance
- between APs object is set to small, minicell, or microcell the
- multicast rates can be set to 11 Mbit/s (22 in 500 Kbps units),
- 5.5 Mbit/s (11), 2 Mbit/s (4), and 1 Mbit/s (2). When this object
- is set to medium, the allowed rates are 5.5 Mbit/s (11),
- 2 Mbit/s (4), 1 Mbit/s (2). When this object is set to large, then
- the multicast rates can be set to 2 Mbits/s (4) or 1 Mbits/s (2).
- The default value for this object should be 2 Mbits/sec (4).
-
- For 802.11a, g, and a/g Wireless NICs:
-
- This object is used to set the multicast rate for beacons, frames
- used for protection mechanism (CTS), and other multicast and broadcast
- frames."
- ::= { oriWirelessIfPropertiesEntry 8 }
-
- oriWirelessIfClosedSystem OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used as a flag which identifies whether the
- device will accept association requests to this interface, for
- client stations configured with a network name of 'ANY'. When
- this object is disabled, it will accept association requests
- from client stations with a network name of 'ANY'. If this
- object is set to enable then the interface will only accept
- association requests that match the interface's network name
- (SSID). The default value for this object should be disable."
- DEFVAL { disable }
- ::= { oriWirelessIfPropertiesEntry 9 }
-
- oriWirelessIfAllowedSupportedDataRates OBJECT-TYPE
- SYNTAX OCTET STRING
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object reflects the transmit rates supported by the
- wireless interface. The values of this object are given in
- units of 500 kbps.
- Examples for supported data rates:
- - 802.11b PHY (DSSS - 2.4 GHz)
- - 0 = Auto Fallback
- - 2 = 1 Mbps
- - 4 = 2 Mbps
- - 11 = 5.5 Mbps
- - 22 = 11 Mbps
-
- - 802.11a PHY (OFDM - 5 GHz)
- - 0 = Auto Fallback
- - 12 = 6 Mbps
- - 18 = 9 Mbps
- - 24 = 12 Mbps
- - 36 = 18 Mbps
- - 48 = 24 Mbps
- - 72 = 36 Mbps
- - 96 = 48 Mbps
- - 108 = 54 Mbps
-
- - 802.11a PHY (OFDM - 5 GHz) with Turbo Mode Enabled
- - 0 = Auto Fallback
- - 24 = 12 Mbps
- - 36 = 18 Mbps
- - 48 = 24 Mbps
- - 72 = 36 Mbps
- - 96 = 48 Mbps
- - 144 = 72 Mbps
- - 192 = 96 Mbps
- - 216 = 108 Mbps
-
- - 802.11g PHY (ERP) in 802.11g only mode
- - 0 = Auto Fallback
- - 12 = 6 Mbps
- - 18 = 9 Mbps
- - 24 = 12 Mbps
- - 36 = 18 Mbps
- - 48 = 24 Mbps
- - 72 = 36 Mbps
- - 96 = 48 Mbps
- - 108 = 54 Mbps
-
- - 802.11g PHY (ERP) in 802.11b/g mode
- - 0 = Auto Fallback
- - 2 = 1 Mbps
- - 4 = 2 Mbps
- - 11 = 5.5 Mbps
- - 12 = 6 Mbps
- - 18 = 9 Mbps
- - 22 = 11 Mbps
- - 24 = 12 Mbps
- - 36 = 18 Mbps
- - 48 = 24 Mbps
- - 72 = 36 Mbps
- - 96 = 48 Mbps
- - 108 = 54 Mbps"
- ::= { oriWirelessIfPropertiesEntry 10 }
-
- oriWirelessIfRegulatoryDomainList OBJECT-TYPE
- SYNTAX OCTET STRING
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object specifies a single regulatory domain (not a list) which
- is supported by the wireless interface."
- ::= { oriWirelessIfPropertiesEntry 11 }
-
- oriWirelessIfAllowedChannels OBJECT-TYPE
- SYNTAX OCTET STRING
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object reflects the radio frequency channels that the
- interface supports."
- ::= { oriWirelessIfPropertiesEntry 12 }
-
- oriWirelessIfMACAddress OBJECT-TYPE
- SYNTAX PhysAddress
- MAX-ACCESS read-only
- STATUS deprecated
- DESCRIPTION
- "This object represents the MAC address of the wireless interface
- present in the device. This object has been deprecated."
- ::= { oriWirelessIfPropertiesEntry 13 }
-
- oriWirelessIfLoadBalancing OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to configure the load balancing feature
- for the wireless interface."
- DEFVAL { enable }
- ::= { oriWirelessIfPropertiesEntry 14 }
-
- oriWirelessIfMediumDensityDistribution OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to configure the medium density distribution
- feature for the wireless interface."
- DEFVAL { enable }
- ::= { oriWirelessIfPropertiesEntry 15 }
-
- oriWirelessIfTxRate OBJECT-TYPE
- SYNTAX Integer32 (0..255)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to configure the transmit rate for unicast
- traffic for the wireless interface. This object is dependent on
- the transmit rates supported by the wireless interface (refer
- to MIB object - oriWirelessIfAllowedSupportedDataRates and
- dot11PHYType). The values of this object are given in units of
- 500 kbps. A value of zero (0) is interpreted as auto fallback.
-
- Examples for configuring this object:
- - 802.11b PHY (DSSS - 2.4 GHz)
- - 0 = Auto Fallback
- - 2 = 1 Mbps
- - 4 = 2 Mbps
- - 11 = 5.5 Mbps
- - 22 = 11 Mbps
-
- - 802.11a PHY (OFDM - 5 GHz)
- - 0 = Auto Fallback
- - 12 = 6 Mbps
- - 18 = 9 Mbps
- - 24 = 12 Mbps
- - 36 = 18 Mbps
- - 48 = 24 Mbps
- - 72 = 36 Mbps
- - 96 = 48 Mbps
- - 108 = 54 Mbps
-
- - 802.11a PHY (OFDM - 5 GHz) with Turbo Mode Enabled
- - 0 = Auto Fallback
- - 24 = 12 Mbps
- - 36 = 18 Mbps
- - 48 = 24 Mbps
- - 72 = 36 Mbps
- - 96 = 48 Mbps
- - 144 = 72 Mbps
- - 192 = 96 Mbps
- - 216 = 108 Mbps
-
- - 802.11g PHY (ERP) in 802.11g only mode
- - 0 = Auto Fallback
- - 12 = 6 Mbps
- - 18 = 9 Mbps
- - 24 = 12 Mbps
- - 36 = 18 Mbps
- - 48 = 24 Mbps
- - 72 = 36 Mbps
- - 96 = 48 Mbps
- - 108 = 54 Mbps
-
- - 802.11g PHY (ERP) in 802.11b/g mode
- - 0 = Auto Fallback
- - 2 = 1 Mbps
- - 4 = 2 Mbps
- - 11 = 5.5 Mbps
- - 12 = 6 Mbps
- - 18 = 9 Mbps
- - 22 = 11 Mbps
- - 24 = 12 Mbps
- - 36 = 18 Mbps
- - 48 = 24 Mbps
- - 72 = 36 Mbps
- - 96 = 48 Mbps
- - 108 = 54 Mbps
-
- The default value for this object should be zero
- (0) auto fallback."
- DEFVAL { 0 }
- ::= { oriWirelessIfPropertiesEntry 16 }
-
- oriWirelessIfAutoChannelSelectStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to configure the automatic frequency channel
- feature for the wireless interface. If this object is enabled, the
- frequency channel object can not be set, but the frequency channel
- selected will be given in that object. The default value for
- this object should be enable."
- DEFVAL { enable }
- ::= { oriWirelessIfPropertiesEntry 17 }
-
- oriWirelessIfBandwidthLimitIn OBJECT-TYPE
- SYNTAX Gauge32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the input bandwidth limit of the interface
- in increments of 64 kbps. The value can be limited by a previous
- written value, the negotiation process during registration or by a
- license. A written value will only take effect after reboot."
- ::= { oriWirelessIfPropertiesEntry 18 }
-
- oriWirelessIfBandwidthLimitOut OBJECT-TYPE
- SYNTAX Gauge32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the output bandwidth limit of the interface
- in increments of 64 kbps. The value can be limited by a previous
- written value, the negotiation process during registration or by a
- license. A written value will only take effect after reboot."
- ::= { oriWirelessIfPropertiesEntry 19 }
-
- oriWirelessIfTurboModeStatus OBJECT-TYPE
- SYNTAX ObjStatus
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable turbo mode support. Turbo
- mode is only supported for 802.11a PHY (OFDM - 5 GHz) and 802.11g
- (ERP - 2.4 GHz) wireless NICs and can only be enabled when super mode
- is enabled. When Turbo mode is enabled the data rates will be
- doubled (refer to oriWirelessIfAllowedSupportedDataRates object
- description)."
- ::= { oriWirelessIfPropertiesEntry 20 }
-
- oriWirelessIfSupportedOperationalModes OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object provides information on the wireless operational modes
- supported by the NIC. Depending on the wireless NIC in the device
- different wireless operational modes can be configured.
- The possible supported modes can be:
- - 802.11b only
- - 802.11g only
- - 802.11b/g
- - 802.11a only
- - 802.11g-wifi"
- ::= { oriWirelessIfPropertiesEntry 21 }
-
- oriWirelessIfOperationalMode OBJECT-TYPE
- SYNTAX INTEGER
- {
- dot11b-only(1),
- dot11g-only(2),
- dot11bg(3),
- dot11a-only(4),
- dot11g-wifi(5)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to set the wireless NIC Operational mode.
- Depending on the wireless NIC in the device different wireless
- operational modes can be configured. The supported modes are:
- - 802.11b only
- - 802.11g only
- - 802.11b/g
- - 802.11a only
- - 802.11g-wifi"
- ::= { oriWirelessIfPropertiesEntry 22 }
-
- oriWirelessIfPreambleType OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object identifies the wireless interface preamble type
- based on the wireless operational mode configured."
- ::= { oriWirelessIfPropertiesEntry 23 }
-
- oriWirelessIfProtectionMechanismStatus OBJECT-TYPE
- SYNTAX ObjStatus
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object indicates if protection mechanism is enabled or not
- based on the wireless operational mode configured."
- ::= { oriWirelessIfPropertiesEntry 24 }
-
- oriWirelessIfSupportedMulticastRates OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the multicast rates supported by the wireless
- NIC and the operational mode configured."
- ::= { oriWirelessIfPropertiesEntry 25 }
-
- oriWirelessIfCapabilities OBJECT-TYPE
- SYNTAX OCTET STRING (SIZE(32))
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object provides information on the wireless capabilities and
- features supported by the wireless NIC. Each bit in this object
- defines a capability/feature supported by the wireless NIC. If the
- bit is set, the capability/feature is supported, otherwise it is not.
- The following list provides a definition of the bits in this object:
- b0 - Distance Between APs
- b1 - Multicast Rate
- b2 - Closed System
- b3 - Load Balancing
- b4 - Medium Density Distribution
- b5 - Auto Channel Select
- b6 - Turbo Mode
- b7 - Interference Robustness
- b8 - Wireless Distribution System (WDS)
- b9 - Transmit Power Control (TPC)
- b10 - Multiple SSIDs
- b11 - SpectraLink VoIP
- b12 - Remote Link Test
- b13 to b255 - Reserved"
- ::= { oriWirelessIfPropertiesEntry 26 }
-
- oriWirelessIfLBTxTimeThreshold OBJECT-TYPE
- SYNTAX Integer32 (100..1000000)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "Maximum allowed Tx processing time, in mS, where Tx processing time
- is measured from time a packet enters AP from the DS to the time it
- successfully leaves the AP's Radio."
- DEFVAL { 1000000 }
- ::= { oriWirelessIfPropertiesEntry 27 }
-
- oriWirelessIfLBAdjAPTimeDiffThreshold OBJECT-TYPE
- SYNTAX Integer32 (100..1000000)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "Maximum allowed difference in mS between adjacent AP's Tx processing
- time."
- DEFVAL { 1000000 }
- ::= { oriWirelessIfPropertiesEntry 28 }
-
- oriWirelessIfACSFrequencyBandScan OBJECT-TYPE
- SYNTAX Integer32 (0..255)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to configure the frequency bands that the auto
- channel select algorithm will scan through. Each bit in this object
- represents a band or subset of channels in the 5 GHz or 2.4 GHz space.
- The value of this object is interpreted as a bitfield, where the
- value of 1 means enable ACS scan for that band.
- The following list provides a definition of the bits in this object:
- b0 - U-NII Lower Band = 5.15 - 5.25 GHz (36, 40, 44, 48)
- b1 - U-NII Middle Band = 5.25 - 5.35 GHz (52, 56, 60, 64)
- b2 - U-NII Upper Band = 5.725 - 5.825 GHz (149, 153, 157, 161)
- b3 - H Band = 5.50 - 5.700 GHz (100, 104, 108, 112, 116, 120,
- 124, 128, 132, 136, 140)
- b4 - 5 GHz ISM Band = 5.825 GHz (165)
- b5 to b255 - Reserved"
- DEFVAL { 3 }
- ::= { oriWirelessIfPropertiesEntry 29 }
-
- oriWirelessIfSecurityPerSSIDStatus OBJECT-TYPE
- SYNTAX ObjStatus
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable the security per SSID
- feature. Once this object is enabled, the administrator should use
- the Wireless Interface SSID table (oriWirelessIfSSIDTable to
- configure the security related management objects."
- DEFVAL { disable }
- ::= { oriWirelessIfPropertiesEntry 30 }
-
- oriWirelessIfDFSStatus OBJECT-TYPE
- SYNTAX ObjStatus
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable/disable dynamic frequency selection.
- This functionality is dependent on the regulatory domain of the
- wireless NIC."
- DEFVAL { disable }
- ::= { oriWirelessIfPropertiesEntry 31 }
-
- oriWirelessIfAntenna OBJECT-TYPE
- SYNTAX INTEGER
- {
- external(1),
- internal(2),
- controllable(3),
- disabled(4)
- }
- MAX-ACCESS read-write
- STATUS deprecated
- DESCRIPTION
- "This object is used to configure the antenna. The administrator can
- select controllable, external, internal, or disable the antenna."
- DEFVAL { external }
- ::= { oriWirelessIfPropertiesEntry 32 }
-
- oriWirelessIfTPCMode OBJECT-TYPE
- SYNTAX Integer32 (0 | 3 | 6 | 9 | 12 | 15 | 18)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to configure the transmit power control of
- the wireless NIC. The transmit power is defined in dBm and can be
- configured in increments 3 dBms."
- DEFVAL { 0 }
- ::= { oriWirelessIfPropertiesEntry 33 }
-
- oriWirelessIfSuperModeStatus OBJECT-TYPE
- SYNTAX ObjStatus
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable/disable super mode support. Super Mode
- increases the overall throughput of the wireless interface by
- implementing fast frame, bursting, and compression. When super mode
- is enabled, the channels that can be used in the 2.4 GHz and 5.0 GHz
- spectrum are limited (refer to oriWirelessIfAllowedChannels for the
- allowed channels). The super mode feature is only supported for
- 802.11a (OFDM - 5 GHz) and 802.11g (ERP - 2.4 GHz) wireless NICs."
- DEFVAL { disable }
- ::= { oriWirelessIfPropertiesEntry 34 }
-
- oriWirelessIfWSSStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- up(1),
- down(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used for the Wireless System Shutdown feature. This
- feature allows an administrator to shut down wireless services to
- clients. When this object is set to down wireless client services
- will be shutdown/disabled, but WDS links will still remain up."
- DEFVAL { up }
- ::= { oriWirelessIfPropertiesEntry 35 }
-
- oriWirelessIfSupportedAuthenticationModes OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used to provide information on the authentication modes
- supported by the wireless interface. The possible authentication modes
- are:
- - none: no authentication mode
- - dot1x: 802.1x authentication mode
- - psk: psk authentication mode"
- ::= { oriWirelessIfPropertiesEntry 36 }
-
- oriWirelessIfSupportedCipherModes OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used to provide information on the cipher modes/types
- supported by the wireless interface. The possible cipher modes/types
- are:
- - none: no cipher/encryption mode
- - wep: wep encryption mode
- - tkip: tkip encryption mode
- - aes: aes encryption mode"
- ::= { oriWirelessIfPropertiesEntry 37 }
-
- oriWirelessIfQoSStatus OBJECT-TYPE
- SYNTAX ObjStatus
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable/disable Quality of Service (QoS) on the
- wireless interface."
- DEFVAL { disable }
- ::= { oriWirelessIfPropertiesEntry 38 }
-
- oriWirelessIfQoSMaxMediumThreshold OBJECT-TYPE
- SYNTAX Integer32 (50..90)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to specify the QoS admission control maximum
- medium threshold. The maximum medium threshold will apply to all
- access categories and is given in a percentage of the medium."
- ::= { oriWirelessIfPropertiesEntry 39 }
-
- oriWirelessIfAntennaGain OBJECT-TYPE
- SYNTAX Integer32 (0..35)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents Antenna Gain value (including cable loss) that will be
- added to the radar detetection parameters."
- DEFVAL { 0 }
- ::= { oriWirelessIfPropertiesEntry 40 }
-
- --=============================================================================
- -- The Wireless Interface Security Table: oriWirelessIfSecurityTable
- --=============================================================================
-
- oriWirelessIfSecurityTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriWirelessIfSecurityEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table contains information on the security management objects
- for the wireless interface(s) present in the device."
- ::= { orinocoWirelessIf 2 }
-
- oriWirelessIfSecurityEntry OBJECT-TYPE
- SYNTAX OriWirelessIfSecurityEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents an entry in the wireless interface
- security table."
- INDEX { oriWirelessIfSecurityIndex }
- ::= { oriWirelessIfSecurityTable 1 }
-
- OriWirelessIfSecurityEntry ::=
- SEQUENCE
- {
- oriWirelessIfSecurityIndex Integer32,
- oriWirelessIfEncryptionOptions INTEGER,
- oriWirelessIfEncryptionStatus INTEGER,
- oriWirelessIfEncryptionKey1 DisplayString,
- oriWirelessIfEncryptionKey2 DisplayString,
- oriWirelessIfEncryptionKey3 DisplayString,
- oriWirelessIfEncryptionKey4 DisplayString,
- oriWirelessIfEncryptionTxKey Integer32,
- oriWirelessIfDenyNonEncryptedData INTEGER,
- oriWirelessIfProfileCode Integer32
- }
-
- oriWirelessIfSecurityIndex OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents a unique value for each interface in the
- system and is used as index to this table."
- ::= { oriWirelessIfSecurityEntry 1 }
-
- oriWirelessIfEncryptionOptions OBJECT-TYPE
- SYNTAX INTEGER
- {
- none(1),
- wep(2),
- rcFour128(3),
- aes(4)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object sets the wireless interface's security
- capabilities (such as WEP and other standard and proprietary
- security features).
-
- AES encryption is only for 802.11a and supports only OCB mode
- integrity check."
- ::= { oriWirelessIfSecurityEntry 2 }
-
- oriWirelessIfEncryptionStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS deprecated
- DESCRIPTION
- "This object is used to enable or disable WEP encryption for the
- wireless interface."
- DEFVAL { disable }
- ::= { oriWirelessIfSecurityEntry 3 }
-
- oriWirelessIfEncryptionKey1 OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents Encryption Key 1. This object should be
- treated as write-only and returned as asterisks."
- ::= { oriWirelessIfSecurityEntry 4 }
-
- oriWirelessIfEncryptionKey2 OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents Encryption Key 2. This object should be
- treated as write-only and returned as asterisks."
- ::= { oriWirelessIfSecurityEntry 5 }
-
- oriWirelessIfEncryptionKey3 OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents Encryption Key 3. This object should be
- treated as write-only and returned as asterisks."
- ::= { oriWirelessIfSecurityEntry 6 }
-
- oriWirelessIfEncryptionKey4 OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents Encryption Key 4. This object should be
- treated as write-only and returned as asterisks."
- ::= { oriWirelessIfSecurityEntry 7 }
-
- oriWirelessIfEncryptionTxKey OBJECT-TYPE
- SYNTAX Integer32 (0..3)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object indicates which encryption key is used to encrypt
- data that is sent via the wireless interfaces. When this object is
- configured to 0, then Encryption Key 1 will be used. When this object
- is configured to 1, then Encryption Key 2 will be used. When
- this object is configured to 2, then Encryption Key 3 will be used.
- When this object is configured to 3, then Encryption Key 4 will be
- used. The default value for this object should be key 0."
- DEFVAL { 0 }
- ::= { oriWirelessIfSecurityEntry 8 }
-
- oriWirelessIfDenyNonEncryptedData OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This parameter indicates if this interface will accept or deny
- non-encrypted data. The default value for this parameters is
- disabled."
- DEFVAL { disable }
- ::= { oriWirelessIfSecurityEntry 9 }
-
- oriWirelessIfProfileCode OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The object represents the profile code of the wirelesss interface.
- This information is comprised of a vendor indication and a
- capability indication (example: bronze or gold card)."
- ::= { oriWirelessIfSecurityEntry 10 }
-
- --=============================================================================
- -- The Wireless Interface SSID Table: oriWirelessIfSSIDTable
- --=============================================================================
-
- oriWirelessIfSSIDTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriWirelessIfSSIDTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table is used to configure the SSIDs for the wireless interface
- in the device."
- ::= { orinocoWirelessIf 3 }
-
- oriWirelessIfSSIDTableEntry OBJECT-TYPE
- SYNTAX OriWirelessIfSSIDTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents an entry in the respective table.
- In this case each table entry represents a VLAN ID."
- INDEX { ifIndex, oriWirelessIfSSIDTableIndex }
- ::= { oriWirelessIfSSIDTable 1 }
-
- OriWirelessIfSSIDTableEntry ::=
- SEQUENCE
- {
- oriWirelessIfSSIDTableIndex Integer32,
- oriWirelessIfSSIDTableSSID DisplayString,
- oriWirelessIfSSIDTableVLANID VlanId,
- oriWirelessIfSSIDTableStatus RowStatus,
- oriWirelessIfSSIDTableSecurityMode INTEGER,
- oriWirelessIfSSIDTableBroadcastSSID ObjStatus,
- oriWirelessIfSSIDTableClosedSystem ObjStatus,
- oriWirelessIfSSIDTableSupportedSecurityModes DisplayString,
- oriWirelessIfSSIDTableEncryptionKey0 WEPKeyType,
- oriWirelessIfSSIDTableEncryptionKey1 WEPKeyType,
- oriWirelessIfSSIDTableEncryptionKey2 WEPKeyType,
- oriWirelessIfSSIDTableEncryptionKey3 WEPKeyType,
- oriWirelessIfSSIDTableEncryptionTxKey Integer32,
- oriWirelessIfSSIDTableEncryptionKeyLength INTEGER,
- oriWirelessIfSSIDTableRekeyingInterval Integer32,
- oriWirelessIfSSIDTablePSKValue OCTET STRING,
- oriWirelessIfSSIDTablePSKPassPhrase DisplayString,
- oriWirelessIfSSIDTableDenyNonEncryptedData ObjStatus,
- oriWirelessIfSSIDTableSSIDAuthorizationStatus ObjStatus,
- oriWirelessIfSSIDTableMACAccessControl ObjStatus,
- oriWirelessIfSSIDTableRADIUSMACAccessControl ObjStatus,
- oriWirelessIfSSIDTableSecurityProfile Integer32,
- oriWirelessIfSSIDTableRADIUSDot1xProfile DisplayString,
- oriWirelessIfSSIDTableRADIUSMACAuthProfile DisplayString,
- oriWirelessIfSSIDTableRADIUSAccountingStatus ObjStatus,
- oriWirelessIfSSIDTableRADIUSAccountingProfile DisplayString,
- oriWirelessIfSSIDTableQoSPolicy Integer32
- }
-
- oriWirelessIfSSIDTableIndex OBJECT-TYPE
- SYNTAX Integer32 (1..16)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the index to the SSID Table."
- ::= { oriWirelessIfSSIDTableEntry 1 }
-
- oriWirelessIfSSIDTableSSID OBJECT-TYPE
- SYNTAX DisplayString (SIZE (1..32))
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object represents the wireless card SSID string (wireless network
- name)."
- ::= { oriWirelessIfSSIDTableEntry 2 }
-
- oriWirelessIfSSIDTableVLANID OBJECT-TYPE
- SYNTAX VlanId
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object represents the VLAN Identifier (ID)."
- DEFVAL { -1 }
- ::= { oriWirelessIfSSIDTableEntry 3 }
-
- oriWirelessIfSSIDTableStatus OBJECT-TYPE
- SYNTAX RowStatus
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object represents the wireless SSID table row/entry status."
- ::= { oriWirelessIfSSIDTableEntry 4 }
-
- oriWirelessIfSSIDTableSecurityMode OBJECT-TYPE
- SYNTAX INTEGER
- {
- none(1),
- dot1x(2),
- mixed(3),
- wpa(4),
- wpa-psk(5),
- wep(6)
- }
- MAX-ACCESS read-create
- STATUS deprecated
- DESCRIPTION
- "This object is used to configure the security mode for this table
- entry (SSID). This object is deprecated."
- DEFVAL { none }
- ::= { oriWirelessIfSSIDTableEntry 5 }
-
- oriWirelessIfSSIDTableBroadcastSSID OBJECT-TYPE
- SYNTAX ObjStatus
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object is used to enable/disable a broadcast SSID in the SSID
- table. A single entry in the SSID table can be enabled to broadcast
- SSID in beacon messages."
- DEFVAL { disable }
- ::= { oriWirelessIfSSIDTableEntry 6 }
-
- oriWirelessIfSSIDTableClosedSystem OBJECT-TYPE
- SYNTAX ObjStatus
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object is used to enable/disable the closed system feature
- for this table entry (SSID)."
- DEFVAL { enable }
- ::= { oriWirelessIfSSIDTableEntry 7 }
-
- oriWirelessIfSSIDTableSupportedSecurityModes OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS deprecated
- DESCRIPTION "This object is used to provide information on the supported
- security modes by the wireless interface(s). The possible security
- modes can be:
- - None: no security mode enabled.
- - dot1x: 802.1x authentication enabled.
- - mixed: mixed WEP and 802.1x.
- - wpa: WiFi Protected Access enabled.
- - wpa-psk: WiFi Protected Access with Preshared Keys enabled.
- - wep: WEP Encryption enabled (no authentication)
- This object is deprecated."
- ::= { oriWirelessIfSSIDTableEntry 8 }
-
- oriWirelessIfSSIDTableEncryptionKey0 OBJECT-TYPE
- SYNTAX WEPKeyType
- MAX-ACCESS read-create
- STATUS deprecated
- DESCRIPTION
- "This object represents Encryption Key 0. This object should be
- treated as write-only and returned as asterisks. This object is
- deprecated."
- ::= { oriWirelessIfSSIDTableEntry 9 }
-
- oriWirelessIfSSIDTableEncryptionKey1 OBJECT-TYPE
- SYNTAX WEPKeyType
- MAX-ACCESS read-create
- STATUS deprecated
- DESCRIPTION
- "This object represents Encryption Key 1. This object should be
- treated as write-only and returned as asterisks. This object is
- deprecated."
- ::= { oriWirelessIfSSIDTableEntry 10 }
-
- oriWirelessIfSSIDTableEncryptionKey2 OBJECT-TYPE
- SYNTAX WEPKeyType
- MAX-ACCESS read-create
- STATUS deprecated
- DESCRIPTION
- "This object represents Encryption Key 2. This object should be
- treated as write-only and returned as asterisks. This object is
- deprecated."
- ::= { oriWirelessIfSSIDTableEntry 11 }
-
- oriWirelessIfSSIDTableEncryptionKey3 OBJECT-TYPE
- SYNTAX WEPKeyType
- MAX-ACCESS read-create
- STATUS deprecated
- DESCRIPTION
- "This object represents Encryption Key 3. This object should be
- treated as write-only and returned as asterisks. This object is
- deprecated."
- ::= { oriWirelessIfSSIDTableEntry 12 }
-
- oriWirelessIfSSIDTableEncryptionTxKey OBJECT-TYPE
- SYNTAX Integer32 (0..3)
- MAX-ACCESS read-create
- STATUS deprecated
- DESCRIPTION
- "This object indicates which encryption key is used to encrypt
- data that is sent via the wireless interfaces. The default value
- for this object should be key 0. This object is deprecated."
- DEFVAL { 0 }
- ::= { oriWirelessIfSSIDTableEntry 13 }
-
- oriWirelessIfSSIDTableEncryptionKeyLength OBJECT-TYPE
- SYNTAX INTEGER
- {
- sixtyFourBits(1),
- oneHundredTwentyEightBits(2),
- oneHundredFiftyTwoBits(3)
- }
- MAX-ACCESS read-create
- STATUS deprecated
- DESCRIPTION
- "This object represents the encryption key length, the supported
- key lengths are 64 bits (40 + 24 for IV), 128 bits
- (104 + 24 for IV), and 152 bits (128 + 24 for IV). This object is
- deprecated."
- DEFVAL { sixtyFourBits }
- ::= { oriWirelessIfSSIDTableEntry 14 }
-
- oriWirelessIfSSIDTableRekeyingInterval OBJECT-TYPE
- SYNTAX Integer32 (0 | 300..65535)
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object represents the encryption rekeying interval. if this
- object is configured to zero (0) rekeying is disabled. The units
- of this object is seconds."
- DEFVAL { 900 }
- ::= { oriWirelessIfSSIDTableEntry 15 }
-
- oriWirelessIfSSIDTablePSKValue OBJECT-TYPE
- SYNTAX OCTET STRING ( SIZE (32) )
- MAX-ACCESS read-create
- STATUS deprecated
- DESCRIPTION
- "The Pre-Shared Key (PSK) for when RSN in PSK mode is the selected
- authentication suite. In that case, the PMK will obtain its value
- from this object.
- This object is logically write-only. Reading this variable shall
- return unsuccessful status or null or zero. This object is deprecated."
- ::= { oriWirelessIfSSIDTableEntry 16 }
-
- oriWirelessIfSSIDTablePSKPassPhrase OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-create
- STATUS deprecated
- DESCRIPTION
- "The PSK, for when RSN in PSK mode is the selected authentication
- suite, is configured by oriWirelessIfSSIDTablePSKValue. An alternative
- manner of setting the PSK uses the password-to-key algorithm defined
- in the standard. This variable provides a means to enter a pass phrase.
- When this object is written, the RSN entity shall use the
- password-to-key algorithm specified in the standard to derive a
- pre-shared and populate oriWirelessIfSSIDTablePSKValue with this key.
- This object is logically write-only. Reading this variable shall
- return unsuccessful status or null or zero. This object is deprecated."
- ::= { oriWirelessIfSSIDTableEntry 17 }
-
- oriWirelessIfSSIDTableDenyNonEncryptedData OBJECT-TYPE
- SYNTAX ObjStatus
- MAX-ACCESS read-create
- STATUS deprecated
- DESCRIPTION
- "This object is used to enable/disable deny non encrypted data. This
- function is only supported when the security mode is configured to
- WEP or Mixed Mode; it is not supported for 802.1x, WPA, and WPA-PSK
- security modes. This object is deprecated."
- DEFVAL { enable }
- ::= { oriWirelessIfSSIDTableEntry 18 }
-
- oriWirelessIfSSIDTableSSIDAuthorizationStatus OBJECT-TYPE
- SYNTAX ObjStatus
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable SSID Authorization."
- DEFVAL { disable }
- ::= { oriWirelessIfSSIDTableEntry 19}
-
- oriWirelessIfSSIDTableMACAccessControl OBJECT-TYPE
- SYNTAX ObjStatus
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable MAC Access Control
- feature/filter for this SSID."
- DEFVAL { disable }
- ::= { oriWirelessIfSSIDTableEntry 20 }
-
- oriWirelessIfSSIDTableRADIUSMACAccessControl OBJECT-TYPE
- SYNTAX ObjStatus
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enables RADIUS Access Control based on
- wireless stations MAC Address."
- DEFVAL { disable }
- ::= { oriWirelessIfSSIDTableEntry 21 }
-
- oriWirelessIfSSIDTableSecurityProfile OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object is used to configure the security profile that will be
- used for this SSID. The security profile is defined in the Security
- Profile Table in the orinocoSecurity group."
- ::= { oriWirelessIfSSIDTableEntry 22 }
-
- oriWirelessIfSSIDTableRADIUSDot1xProfile OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object is used to configure the RADIUS server profile that will be
- used for 802.1x authentication for this SSID. The RADIUS profile is
- defined in the RADIUS Server Table in the orinocoRADIUSSvrProfile
- group."
- ::= { oriWirelessIfSSIDTableEntry 23 }
-
- oriWirelessIfSSIDTableRADIUSMACAuthProfile OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object is used to configure the RADIUS server profile that will be
- used for MAC based RADIUS authentication for this SSID. The RADIUS
- profile is defined in the RADIUS Server Table in the
- orinocoRADIUSSvrProfile group."
- ::= { oriWirelessIfSSIDTableEntry 24 }
-
- oriWirelessIfSSIDTableRADIUSAccountingStatus OBJECT-TYPE
- SYNTAX ObjStatus
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable the RADIUS Accounting
- service per SSID."
- DEFVAL { disable }
- ::= { oriWirelessIfSSIDTableEntry 25 }
-
- oriWirelessIfSSIDTableRADIUSAccountingProfile OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object is used to configure the RADIUS server profile that will
- be used for Accounting for this SSID. The RADIUS profile is defined
- in the RADIUS Server Table in the orinocoRADIUSSvrProfile group."
- ::= { oriWirelessIfSSIDTableEntry 26 }
-
- oriWirelessIfSSIDTableQoSPolicy OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object is used to configure the QoS policy that will be
- used for this SSID. The QoS profile is defined in the QoS Policy
- Table in the orinocoQoS group."
- ::= { oriWirelessIfSSIDTableEntry 27 }
-
- --=============================================================================
- -- The Wireless Interface Group Scalar Objects
- --=============================================================================
-
- oriWirelessIfTxPowerControl OBJECT-TYPE
- SYNTAX ObjStatus
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable Transmit (Tx) Power Control
- feature."
- DEFVAL { disable }
- ::= { orinocoWirelessIf 4 }
-
- --=============================================================================
- -- The Ethernet Interface Subgroup: orinocoEthernetIf
- --=============================================================================
-
- oriEthernetIfConfigTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriEthernetIfConfigTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table is used to configure the ethernet interface(s) for the
- device."
- ::= { orinocoEthernetIf 1 }
-
- oriEthernetIfConfigTableEntry OBJECT-TYPE
- SYNTAX OriEthernetIfConfigTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents an entry in the ethernet interface
- configuration table."
- INDEX { oriEthernetIfConfigTableIndex }
- ::= { oriEthernetIfConfigTable 1 }
-
- OriEthernetIfConfigTableEntry ::=
- SEQUENCE
- {
- oriEthernetIfConfigTableIndex Integer32,
- oriEthernetIfConfigSettings INTEGER,
- oriEthernetIfConfigBandwidthLimitIn Gauge32,
- oriEthernetIfConfigBandwidthLimitOut Gauge32
- }
-
- oriEthernetIfConfigTableIndex OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the index of the ethernet configuraiton
- table."
- ::= { oriEthernetIfConfigTableEntry 1 }
-
- oriEthernetIfConfigSettings OBJECT-TYPE
- SYNTAX INTEGER
- {
- tenMegabitPerSecHalfDuplex(1),
- tenMegabitPerSecFullDuplex(2),
- tenMegabitPerSecAutoDuplex(3),
- onehundredMegabitPerSecHalfDuplex(4),
- onehundredMegabitPerSecFullDuplex(5),
- autoSpeedHalfDuplex(6),
- autoSpeedAutoDuplex(7),
- onehundredMegabitPerSecAutoDuplex(8)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to configure the Ethernet interface's speed.
- Some devices support all the configuration options
- listed above, while others support only a subset of the
- configuration options."
- ::= { oriEthernetIfConfigTableEntry 2 }
-
- oriEthernetIfConfigBandwidthLimitIn OBJECT-TYPE
- SYNTAX Gauge32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the input bandwidth limit of the interface
- in increments of 64 kbps. The value can be limited by a previous
- written value, the negotiation process during registration, or by
- a license. A written value will only take effect after reboot."
- ::= { oriEthernetIfConfigTableEntry 3 }
-
- oriEthernetIfConfigBandwidthLimitOut OBJECT-TYPE
- SYNTAX Gauge32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the output bandwidth limit of the interface
- in increments of 64 kbps. The value can be limited by a previous
- written value, the negotiation process during registration, or by
- a license. A written value will only take effect after reboot."
- ::= { oriEthernetIfConfigTableEntry 4 }
-
- --=============================================================================
- -- The Interface Subgroup: orinocoIf
- --=============================================================================
-
- oriIfWANInterfaceMACAddress OBJECT-TYPE
- SYNTAX PhysAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the MAC address of the WAN interface."
- ::= { orinocoIf 4 }
-
- --=============================================================================
- -- The WORP Interface Subgroup: orinocoWORPIf
- --=============================================================================
-
- oriWORPIfConfigTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriWORPIfConfigTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table is used to configure the mode, time-outs, and protocol
- objects for wireless interface(s) that are configured to run WORP."
- ::= { orinocoWORPIf 1 }
-
- oriWORPIfConfigTableEntry OBJECT-TYPE
- SYNTAX OriWORPIfConfigTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents an entry in the WORP Interface
- Configuration Table."
- INDEX { ifIndex }
- ::= { oriWORPIfConfigTable 1 }
-
- OriWORPIfConfigTableEntry ::=
- SEQUENCE
- {
- oriWORPIfConfigTableMode INTEGER,
- oriWORPIfConfigTableBaseStationName DisplayString,
- oriWORPIfConfigTableMaxSatellites Integer32,
- oriWORPIfConfigTableRegistrationTimeout Integer32,
- oriWORPIfConfigTableRetries Integer32,
- oriWORPIfConfigTableNetworkSecret DisplayString,
- oriWORPIfConfigTableNoSleepMode ObjStatus
- }
-
- oriWORPIfConfigTableMode OBJECT-TYPE
- SYNTAX INTEGER
- {
- disabled(1),
- ap(2),
- base(3),
- satellite(4)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "The running mode of this interface:
- - If set to disabled, the interface is disabled.
- - If set to AP, the interface will run in standard IEEE802.11
- mode.
- - If set to Base, the interface will be a WORP master
- interface and be able to connect to multiple WORP satellites.
- - If set to Satellite, the interface will be a WORP slave
- interface."
- DEFVAL { disabled }
- ::= { oriWORPIfConfigTableEntry 1 }
-
- oriWORPIfConfigTableBaseStationName OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "The name of the base station. For a base this name will default
- to the MIB-II sysName; for a satellite to empty (if not registered
- to any base) or the name it is registered to. When a name is set
- for a satellite, the satellite will only register on a base
- with this name."
- ::= { oriWORPIfConfigTableEntry 2 }
-
- oriWORPIfConfigTableMaxSatellites OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "The maximum of remotes allowed on this interface. Please note
- that this value will also be limited by the image and the
- license."
- ::= { oriWORPIfConfigTableEntry 3 }
-
- oriWORPIfConfigTableRegistrationTimeout OBJECT-TYPE
- SYNTAX Integer32 (1..10)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the Timeout of regristration and
- authentication, configurable between 1sec and 10sec."
- ::= { oriWORPIfConfigTableEntry 4 }
-
- oriWORPIfConfigTableRetries OBJECT-TYPE
- SYNTAX Integer32 (1..10)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "The number of times a data message will be retransmitted,
- configurable between 0 and 10. The value 0 allows unreliable
- operation for streaming applications."
- ::= { oriWORPIfConfigTableEntry 5 }
-
- oriWORPIfConfigTableNetworkSecret OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "The NetworkSecret is a string that must be the same for all
- stations in a certain network. If a station has another secret
- configured as the base, the base will not allow the station to
- register. This object should be treated as write-only and
- returned as asterisks."
- ::= { oriWORPIfConfigTableEntry 6 }
-
- oriWORPIfConfigTableNoSleepMode OBJECT-TYPE
- SYNTAX ObjStatus
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable sleep mode. If this object
- is enabled, a subscriber unit will not go into sleep mode when
- they have no data to send."
- DEFVAL { disable }
- ::= { oriWORPIfConfigTableEntry 7 }
-
- oriWORPIfStatTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriWORPIfStatTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table is used to monitor the statistics of interfaces that
- run WORP."
- ::= { orinocoWORPIf 2 }
-
- oriWORPIfStatTableEntry OBJECT-TYPE
- SYNTAX OriWORPIfStatTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents an entry in the WORP Interface
- Statistics Table."
- INDEX { ifIndex }
- ::= { oriWORPIfStatTable 1 }
-
- OriWORPIfStatTableEntry ::=
- SEQUENCE
- {
- oriWORPIfStatTableRemotePartners Counter32,
- oriWORPIfStatTableAverageLocalSignal Integer32,
- oriWORPIfStatTableAverageLocalNoise Integer32,
- oriWORPIfStatTableAverageRemoteSignal Integer32,
- oriWORPIfStatTableAverageRemoteNoise Integer32,
- oriWORPIfStatTableBaseStationAnnounces Counter32,
- oriWORPIfStatTableRegistrationRequests Counter32,
- oriWORPIfStatTableRegistrationRejects Counter32,
- oriWORPIfStatTableAuthenticationRequests Counter32,
- oriWORPIfStatTableAuthenticationConfirms Counter32,
- oriWORPIfStatTableRegistrationAttempts Counter32,
- oriWORPIfStatTableRegistrationIncompletes Counter32,
- oriWORPIfStatTableRegistrationTimeouts Counter32,
- oriWORPIfStatTableRegistrationLastReason INTEGER,
- oriWORPIfStatTablePollData Counter32,
- oriWORPIfStatTablePollNoData Counter32,
- oriWORPIfStatTableReplyData Counter32,
- oriWORPIfStatTableReplyMoreData Counter32,
- oriWORPIfStatTableReplyNoData Counter32,
- oriWORPIfStatTableRequestForService Counter32,
- oriWORPIfStatTableSendSuccess Counter32,
- oriWORPIfStatTableSendRetries Counter32,
- oriWORPIfStatTableSendFailures Counter32,
- oriWORPIfStatTableReceiveSuccess Counter32,
- oriWORPIfStatTableReceiveRetries Counter32,
- oriWORPIfStatTableReceiveFailures Counter32,
- oriWORPIfStatTablePollNoReplies Counter32
- }
-
- oriWORPIfStatTableRemotePartners OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The number of remote partners. For a satellite, this parameter
- will always be zero or one."
- ::= { oriWORPIfStatTableEntry 1 }
-
- oriWORPIfStatTableAverageLocalSignal OBJECT-TYPE
- SYNTAX Integer32 (-102..-10)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The current signal level calculated over all inbound packets.
- This variable indicates the running average of the local signal
- level using the algorithm (3/4*oldvalue + 1/4*newvalue)."
- ::= { oriWORPIfStatTableEntry 2 }
-
- oriWORPIfStatTableAverageLocalNoise OBJECT-TYPE
- SYNTAX Integer32 (-102..-10)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The current noise level calculated over all inbound packets.
- This variable indicates the running average of the local noise
- level using the algorithm (3/4*oldvalue + 1/4*newvalue)."
- ::= { oriWORPIfStatTableEntry 3 }
-
- oriWORPIfStatTableAverageRemoteSignal OBJECT-TYPE
- SYNTAX Integer32 (-102..-10)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The current remote signal level calculated over the inbound
- packets send by this station. This variable indicates the
- running average over all registered stations of the remote
- signal level using the algorithm (3/4*oldvalue + 1/4*newvalue)."
- ::= { oriWORPIfStatTableEntry 4 }
-
- oriWORPIfStatTableAverageRemoteNoise OBJECT-TYPE
- SYNTAX Integer32 (-102..-10)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The current average remote noise level calculated over the
- inbound packets send by this station. This variable indicates
- the running average over all registered stations of the remote
- noise level using the algorithm (3/4*oldvalue + 1/4*newvalue)."
- ::= { oriWORPIfStatTableEntry 5 }
-
- oriWORPIfStatTableBaseStationAnnounces OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The number of Base Station Announces Broadcasts (BSAB) sent
- (base) or received (satellite) on this interface."
- ::= { oriWORPIfStatTableEntry 6 }
-
- oriWORPIfStatTableRegistrationRequests OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The number of Registration Requests (RREQ) sent (satellite) or
- received (base) on this interface."
- ::= { oriWORPIfStatTableEntry 7 }
-
- oriWORPIfStatTableRegistrationRejects OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The number of Registration Rejects (RREJ) sent (base) or
- received (satellite) on this interface."
- ::= { oriWORPIfStatTableEntry 8 }
-
- oriWORPIfStatTableAuthenticationRequests OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The number of Authentication Requests (AREQ) sent (satellite) or
- received (base) on this interface."
- ::= { oriWORPIfStatTableEntry 9 }
-
- oriWORPIfStatTableAuthenticationConfirms OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The number of Authentication Confirms (ACFM) sent (base) or
- received (satellite) on this interface."
- ::= { oriWORPIfStatTableEntry 10 }
-
- oriWORPIfStatTableRegistrationAttempts OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The number of times a Registration Attempt has been initiated."
- ::= { oriWORPIfStatTableEntry 11 }
-
- oriWORPIfStatTableRegistrationIncompletes OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The number of registration attempts that is not completed yet.
- For a satellite this parameters will always be zero or one."
- ::= { oriWORPIfStatTableEntry 12 }
-
- oriWORPIfStatTableRegistrationTimeouts OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The number of times the registration procedure timed out."
- ::= { oriWORPIfStatTableEntry 13 }
-
- oriWORPIfStatTableRegistrationLastReason OBJECT-TYPE
- SYNTAX INTEGER
- {
- none(1),
- noMoreAllowed(2),
- incorrectParameter(3),
- roaming(4),
- timeout(5),
- lowQuality(6)
- }
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The reason for why the last registration was aborted or failed."
- ::= { oriWORPIfStatTableEntry 14 }
-
- oriWORPIfStatTablePollData OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The number of polls with data sent (base) or received
- (satellite)."
- ::= { oriWORPIfStatTableEntry 15 }
-
- oriWORPIfStatTablePollNoData OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The number of polls with no data sent (base) or received
- (satellite)."
- ::= { oriWORPIfStatTableEntry 16 }
-
- oriWORPIfStatTableReplyData OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The number of poll replies with data sent (satellite) or
- received (base). This counter does not include replies with the
- MoreData flag set (see ReplyMoreData)."
- ::= { oriWORPIfStatTableEntry 17 }
-
- oriWORPIfStatTableReplyMoreData OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The number of poll replies with data sent (satellite) or
- received (base) with the MoreData flag set (see also ReplyData)."
- ::= { oriWORPIfStatTableEntry 18 }
-
- oriWORPIfStatTableReplyNoData OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The number of poll replies with no data sent (satellite) or
- received (base)."
- ::= { oriWORPIfStatTableEntry 19 }
-
- oriWORPIfStatTableRequestForService OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The number of requests for service sent (satellite) or
- received (base)."
- ::= { oriWORPIfStatTableEntry 20 }
-
- oriWORPIfStatTableSendSuccess OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The number of data packets sent that were acknowledged and did
- not need a retransmit."
- ::= { oriWORPIfStatTableEntry 21 }
-
- oriWORPIfStatTableSendRetries OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The number of data packets sent that needed retransmition but
- were finally received succesfully by the remote partner."
- ::= { oriWORPIfStatTableEntry 22 }
-
- oriWORPIfStatTableSendFailures OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The number of data packets sent that were (finally) not received
- succesfully by the remote partner."
- ::= { oriWORPIfStatTableEntry 23 }
-
- oriWORPIfStatTableReceiveSuccess OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The number of data packets received that were acknowledged and
- did not need a retransmit of the remote partner."
- ::= { oriWORPIfStatTableEntry 24 }
-
- oriWORPIfStatTableReceiveRetries OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The number of data packets received that needed retransmition by
- the remote partner but were finally received succesfully."
- ::= { oriWORPIfStatTableEntry 25 }
-
- oriWORPIfStatTableReceiveFailures OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The number of data packets that were (finally) not received
- succesfully."
- ::= { oriWORPIfStatTableEntry 26 }
-
- oriWORPIfStatTablePollNoReplies OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The number of times a poll was sent but no reply was received.
- This object only applies to the base."
- ::= { oriWORPIfStatTableEntry 27 }
-
- --=============================================================================
- -- Definition of the WORP Satellite Subgroups
- -- orinocoWORPIfSatConfig
- -- orinocoWORPIfSatStat
- --=============================================================================
-
- oriWORPIfSatConfigStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enabled(1),
- disabled(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable the per-satellite config
- from the base device."
- DEFVAL { disabled }
- ::= { orinocoWORPIfSatConfig 1 }
-
- oriWORPIfSatConfigTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriWORPIfSatConfigTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table contains wireless stations statistics."
- ::= { orinocoWORPIfSatConfig 2 }
-
- oriWORPIfSatConfigTableEntry OBJECT-TYPE
- SYNTAX OriWORPIfSatConfigTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents an entry in the WORP Interface
- Satellite Statistics Table."
- INDEX { oriWORPIfSatConfigTableIndex }
- ::= { oriWORPIfSatConfigTable 1 }
-
- OriWORPIfSatConfigTableEntry ::=
- SEQUENCE
- {
- oriWORPIfSatConfigTableIndex Integer32,
- oriWORPIfSatConfigTableEntryStatus INTEGER,
- oriWORPIfSatConfigTableMacAddress MacAddress,
- oriWORPIfSatConfigTableMinimumBandwidthLimitDownlink Gauge32,
- oriWORPIfSatConfigTableMaximumBandwidthLimitDownlink Gauge32,
- oriWORPIfSatConfigTableMinimumBandwidthLimitUplink Gauge32,
- oriWORPIfSatConfigTableMaximumBandwidthLimitUplink Gauge32,
- oriWORPIfSatConfigTableComment DisplayString
- }
-
- oriWORPIfSatConfigTableIndex OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used to index the protocol filter table."
- ::= { oriWORPIfSatConfigTableEntry 1 }
-
- oriWORPIfSatConfigTableEntryStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2),
- delete(3),
- create(4)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable, disable, delete, create the
- Ethernet protocols in this table."
- ::= { oriWORPIfSatConfigTableEntry 2 }
-
- oriWORPIfSatConfigTableMacAddress OBJECT-TYPE
- SYNTAX MacAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION "This object represents the MAC address of the satellite
- for which the statistics are gathered."
- ::= { oriWORPIfSatConfigTableEntry 3 }
-
- oriWORPIfSatConfigTableMinimumBandwidthLimitDownlink OBJECT-TYPE
- SYNTAX Gauge32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the minimum input bandwidth limit of the
- interface in increments of 64 kbps. The value can be limited by a
- previous written value, the negotiation process during registration or
- by a license. A written value will only take effect after reboot."
- ::= { oriWORPIfSatConfigTableEntry 4 }
-
- oriWORPIfSatConfigTableMaximumBandwidthLimitDownlink OBJECT-TYPE
- SYNTAX Gauge32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the maximum input bandwidth limit of the
- interface in increments of 64 kbps. The value can be limited by a
- previous written value, the negotiation process during registration
- or by a license. A written value will only take effect after reboot."
- ::= { oriWORPIfSatConfigTableEntry 5 }
-
- oriWORPIfSatConfigTableMinimumBandwidthLimitUplink OBJECT-TYPE
- SYNTAX Gauge32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the minimum output bandwidth limit of the
- interface in increments of 64 kbps. The value can be limited by a
- previous written value, the negotiation process during registration or
- by a license. A written value will only take effect after reboot."
- ::= { oriWORPIfSatConfigTableEntry 6 }
-
- oriWORPIfSatConfigTableMaximumBandwidthLimitUplink OBJECT-TYPE
- SYNTAX Gauge32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the maximum output bandwidth limit of the
- interface in increments of 64 kbps. The value can be limited by a
- previous written value, the negotiation process during registration or
- by a license. A written value will only take effect after reboot."
- ::= { oriWORPIfSatConfigTableEntry 7 }
-
- oriWORPIfSatConfigTableComment OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used for an optional comment associated to the
- per Satellite config Table entry."
- ::= { oriWORPIfSatConfigTableEntry 8 }
-
- oriWORPIfSatStatTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriWORPIfSatStatTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table contains wireless stations statistics."
- ::= { orinocoWORPIfSatStat 1 }
-
- oriWORPIfSatStatTableEntry OBJECT-TYPE
- SYNTAX OriWORPIfSatStatTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents an entry in the WORP Interface
- Satellite Statistics Table."
- INDEX { oriStationStatTableIndex }
- ::= { oriWORPIfSatStatTable 1 }
-
- OriWORPIfSatStatTableEntry ::=
- SEQUENCE
- {
- oriWORPIfSatStatTableIndex Integer32,
- oriWORPIfSatStatTableMacAddress MacAddress,
- oriWORPIfSatStatTableAverageLocalSignal Integer32,
- oriWORPIfSatStatTableAverageLocalNoise Integer32,
- oriWORPIfSatStatTableAverageRemoteSignal Integer32,
- oriWORPIfSatStatTableAverageRemoteNoise Integer32,
- oriWORPIfSatStatTablePollData Counter32,
- oriWORPIfSatStatTablePollNoData Counter32,
- oriWORPIfSatStatTableReplyData Counter32,
- oriWORPIfSatStatTableReplyNoData Counter32,
- oriWORPIfSatStatTableRequestForService Counter32,
- oriWORPIfSatStatTableSendSuccess Counter32,
- oriWORPIfSatStatTableSendRetries Counter32,
- oriWORPIfSatStatTableSendFailures Counter32,
- oriWORPIfSatStatTableReceiveSuccess Counter32,
- oriWORPIfSatStatTableReceiveRetries Counter32,
- oriWORPIfSatStatTableReceiveFailures Counter32,
- oriWORPIfSatStatTablePollNoReplies Counter32,
- oriWORPIfSatStatTableLocalTxRate Integer32,
- oriWORPIfSatStatTableRemoteTxRate Integer32
- }
-
- oriWORPIfSatStatTableIndex OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the table index for SatStat Table."
- ::= { oriWORPIfSatStatTableEntry 1 }
-
- oriWORPIfSatStatTableMacAddress OBJECT-TYPE
- SYNTAX MacAddress
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION "This object represents the MAC address of the satellite
- for which the statistics are gathered."
- ::= { oriWORPIfSatStatTableEntry 2 }
-
- oriWORPIfSatStatTableAverageLocalSignal OBJECT-TYPE
- SYNTAX Integer32 (-102..-10)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The current signal level calculated over all inbound packets.
- This variable indicates the running average of the local signal
- level using the algorithm (3/4*oldvalue + 1/4*newvalue)."
- ::= { oriWORPIfSatStatTableEntry 3 }
-
- oriWORPIfSatStatTableAverageLocalNoise OBJECT-TYPE
- SYNTAX Integer32 (-102..-10)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The current noise level calculated over all inbound packets.
- This variable indicates the running average of the local noise
- level using the algorithm (3/4*oldvalue + 1/4*newvalue)."
- ::= { oriWORPIfSatStatTableEntry 4 }
-
- oriWORPIfSatStatTableAverageRemoteSignal OBJECT-TYPE
- SYNTAX Integer32 (-102..-10)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The current remote signal level calculated over the inbound
- packets send by this station. This variable indicates the
- running average over all registered stations of the remote
- signal level using the algorithm (3/4*oldvalue + 1/4*newvalue)."
- ::= { oriWORPIfSatStatTableEntry 5 }
-
- oriWORPIfSatStatTableAverageRemoteNoise OBJECT-TYPE
- SYNTAX Integer32 (-102..-10)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The current average remote noise level calculated over the
- inbound packets send by this station. This variable indicates
- the running average over all registered stations of the remote
- noise level using the algorithm (3/4*oldvalue + 1/4*newvalue)."
- ::= { oriWORPIfSatStatTableEntry 6 }
-
- oriWORPIfSatStatTablePollData OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The number of polls with data sent (base) or received
- (satellite)."
- ::= { oriWORPIfSatStatTableEntry 7 }
-
- oriWORPIfSatStatTablePollNoData OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The number of polls with no data sent (base) or received
- (satellite)."
- ::= { oriWORPIfSatStatTableEntry 8 }
-
- oriWORPIfSatStatTableReplyData OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The number of poll replies with data sent (satellite) or
- received (base). This counter does not include replies with the
- MoreData flag set (see ReplyMoreData)."
- ::= { oriWORPIfSatStatTableEntry 9 }
-
- oriWORPIfSatStatTableReplyNoData OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The number of poll replies with no data sent (satellite) or
- received (base)."
- ::= { oriWORPIfSatStatTableEntry 10 }
-
- oriWORPIfSatStatTableRequestForService OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The number of requests for service sent (satellite) or
- received (base)."
- ::= { oriWORPIfSatStatTableEntry 11 }
-
- oriWORPIfSatStatTableSendSuccess OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The number of data packets sent that were acknowledged and did
- not need a retransmit."
- ::= { oriWORPIfSatStatTableEntry 12 }
-
- oriWORPIfSatStatTableSendRetries OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The number of data packets sent that needed retransmition but
- were finally received succesfully by the remote partner."
- ::= { oriWORPIfSatStatTableEntry 13 }
-
- oriWORPIfSatStatTableSendFailures OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The number of data packets sent that were (finally) not received
- succesfully by the remote partner."
- ::= { oriWORPIfSatStatTableEntry 14 }
-
- oriWORPIfSatStatTableReceiveSuccess OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The number of data packets received that were acknowledged and
- did not need a retransmit of the remote partner."
- ::= { oriWORPIfSatStatTableEntry 15 }
-
- oriWORPIfSatStatTableReceiveRetries OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The number of data packets received that needed retransmition by
- the remote partner but were finally received succesfully."
- ::= { oriWORPIfSatStatTableEntry 16 }
-
- oriWORPIfSatStatTableReceiveFailures OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The number of data packets that were (finally) not received
- succesfully."
- ::= { oriWORPIfSatStatTableEntry 17 }
-
- oriWORPIfSatStatTablePollNoReplies OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The number of times a poll was sent but no reply was received.
- This object only applies to the base."
- ::= { oriWORPIfSatStatTableEntry 18 }
-
- oriWORPIfSatStatTableLocalTxRate OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the Transmit Data Rate of the BSU."
- ::= { oriWORPIfSatStatTableEntry 19 }
-
-
- oriWORPIfSatStatTableRemoteTxRate OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the Transmit Data Rate of the SU
- which is registered to this SU."
- ::= { oriWORPIfSatStatTableEntry 20 }
-
-
- oriWORPIfSiteSurveyOperation OBJECT-TYPE
- SYNTAX INTEGER
- {
- enabled(1),
- disabled(2),
- test(3)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable the site survey mode. The site
- survey is going to show user the wireless signal level, noise level and
- SNR value."
- DEFVAL { disabled }
- ::= { orinocoWORPIfSiteSurvey 1 }
-
- oriWORPIfSiteSurveyTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriWORPIfSiteSurveySignalQualityTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table contains the information for the stations currently
- associated with the access point."
- ::= { orinocoWORPIfSiteSurvey 2 }
-
- oriWORPIfSiteSurveySignalQualityTableEntry OBJECT-TYPE
- SYNTAX OriWORPIfSiteSurveySignalQualityTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents the entry in the Remote Link Test table."
- INDEX { oriWORPIfSiteSurveyTableIndex }
- ::= { oriWORPIfSiteSurveyTable 1 }
-
- OriWORPIfSiteSurveySignalQualityTableEntry ::=
- SEQUENCE
- {
- oriWORPIfSiteSurveyTableIndex Integer32,
- oriWORPIfSiteSurveyBaseMACAddress PhysAddress,
- oriWORPIfSiteSurveyBaseName DisplayString,
- oriWORPIfSiteSurveyMaxSatAllowed Integer32,
- oriWORPIfSiteSurveyNumSatRegistered Integer32,
- oriWORPIfSiteSurveyCurrentSatRegistered Integer32,
- oriWORPIfSiteSurveyLocalSignalLevel Integer32,
- oriWORPIfSiteSurveyLocalNoiseLevel Integer32,
- oriWORPIfSiteSurveyLocalSNR Integer32,
- oriWORPIfSiteSurveyRemoteSignalLevel Integer32,
- oriWORPIfSiteSurveyRemoteNoiseLevel Integer32,
- oriWORPIfSiteSurveyRemoteSNR Integer32
- }
-
- oriWORPIfSiteSurveyTableIndex OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents a unique entry in the table."
- ::= { oriWORPIfSiteSurveySignalQualityTableEntry 1 }
-
- oriWORPIfSiteSurveyBaseMACAddress OBJECT-TYPE
- SYNTAX PhysAddress
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the MAC address of the base unit being tested
- with."
- ::= { oriWORPIfSiteSurveySignalQualityTableEntry 2 }
-
- oriWORPIfSiteSurveyBaseName OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object identifies the name of the base unit being tested with.."
- ::= { oriWORPIfSiteSurveySignalQualityTableEntry 3 }
-
- oriWORPIfSiteSurveyMaxSatAllowed OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object identifies the maximum number of satellites is allowed to
- be registered with the base unit being tested with."
- ::= { oriWORPIfSiteSurveySignalQualityTableEntry 4 }
-
- oriWORPIfSiteSurveyNumSatRegistered OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object identifies the maximum number of satellites is allowed to
- be registered with the base unit being tested with."
- ::= { oriWORPIfSiteSurveySignalQualityTableEntry 5 }
-
- oriWORPIfSiteSurveyCurrentSatRegistered OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object identifies the maximum number of satellites is allowed to
- be registered with the base unit being tested with."
- ::= { oriWORPIfSiteSurveySignalQualityTableEntry 6 }
-
- oriWORPIfSiteSurveyLocalSignalLevel OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The current signal level (in dB) for the Site Survey from this
- station. This object indicates the running average of the local
- signal level using the algorithm (3/4*oldvalue + 1/4*newvalue)."
- ::= { oriWORPIfSiteSurveySignalQualityTableEntry 7 }
-
- oriWORPIfSiteSurveyLocalNoiseLevel OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The current noise level (in dB) for the Site Survey to this station.
- This object indicates the running average of the local noise
- level."
- ::= { oriWORPIfSiteSurveySignalQualityTableEntry 8 }
-
- oriWORPIfSiteSurveyLocalSNR OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The current signal to noise ratio for the Site Survey to this
- station."
- ::= { oriWORPIfSiteSurveySignalQualityTableEntry 9 }
-
- oriWORPIfSiteSurveyRemoteSignalLevel OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The current signal level (in dB) for the Site Survey from the base
- with which the current satellite is registered. This object indicates
- the running average of the local signal level using the
- algorithm (3/4*oldvalue + 1/4*newvalue)."
- ::= { oriWORPIfSiteSurveySignalQualityTableEntry 10 }
-
- oriWORPIfSiteSurveyRemoteNoiseLevel OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The current noise level (in dB) for the Site Survey from the base
- with which the current satellite is registered."
- ::= { oriWORPIfSiteSurveySignalQualityTableEntry 11 }
-
- oriWORPIfSiteSurveyRemoteSNR OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The current SNR (in dB) for the Site Survey from the base
- with which the current satellite is registered."
- ::= { oriWORPIfSiteSurveySignalQualityTableEntry 12 }
-
- --=============================================================================
- -- The DDRS sub group under orinoco WORP group - START
- --=============================================================================
-
- oriWORPIfDDRSStatus OBJECT-TYPE
- SYNTAX ObjStatus
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This is object is used to enable/disable the WORP DDRS feature on
- the BSU."
- DEFVAL { disable }
- ::= { orinocoWORPIfDDRS 1 }
-
- oriWORPIfDDRSDefDataRate OBJECT-TYPE
- SYNTAX Integer32 (6..108)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This is the data rate that shall be used only when DDRS
- is enabled. This is to specify default data rate on BSU.
- The possible values of the variable shall be:
- 1. 802.11a normal mode 6Mbps
- 2. 802.11a normal mode 9Mbps
- 3. 802.11a normal mode 12Mbps
- 4. 802.11a normal mode 18Mbps
- 5. 802.11a normal mode 24Mbps
- 6. 802.11a normal mode 36Mbps
- 7. 802.11a normal mode 48Mbps
- 8. 802.11a normal mode 54Mbps
- 9. 802.11a turbo mode 12Mbps
- 10. 802.11a turbo mode 18Mbps
- 11. 802.11a turbo mode 24Mbps
- 12. 802.11a turbo mode 36Mbps
- 13. 802.11a turbo mode 48Mbps
- 14. 802.11a turbo mode 72Mbps
- 15. 802.11a turbo mode 96Mbps
- 16. 802.11a turbo mode 108Mbps"
- ::= { orinocoWORPIfDDRS 2 }
-
- oriWORPIfDDRSMaxDataRate OBJECT-TYPE
- SYNTAX Integer32 (6..108)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This is the data rate that shall be used only when DDRS
- is enabled. This is to limit maximum possible data rate
- that is set by DDRS on BSU.
- The possible values of the variable shall be:
- 1. 802.11a normal mode 6Mbps
- 2. 802.11a normal mode 9Mbps
- 3. 802.11a normal mode 12Mbps
- 4. 802.11a normal mode 18Mbps
- 5. 802.11a normal mode 24Mbps
- 6. 802.11a normal mode 36Mbps
- 7. 802.11a normal mode 48Mbps
- 8. 802.11a normal mode 54Mbps
- 9. 802.11a turbo mode 12Mbps
- 10. 802.11a turbo mode 18Mbps
- 11. 802.11a turbo mode 24Mbps
- 12. 802.11a turbo mode 36Mbps
- 13. 802.11a turbo mode 48Mbps
- 14. 802.11a turbo mode 72Mbps
- 15. 802.11a turbo mode 96Mbps
- 16. 802.11a turbo mode 108Mbps"
- DEFVAL { 36 }
- ::= { orinocoWORPIfDDRS 3 }
-
- oriWORPIfDDRSMinReqSNRdot11an6Mbps OBJECT-TYPE
- SYNTAX Integer32 (1..50)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This is to specify the minimum required SNR for data rate
- of 6Mbps on 802.11a radio, normal mode. The value should be
- in dB and in the range 0..50 dB. The default value should be 6dB."
- DEFVAL { 6 }
- ::= { orinocoWORPIfDDRS 4 }
-
- oriWORPIfDDRSMinReqSNRdot11an9Mbps OBJECT-TYPE
- SYNTAX Integer32 (1..50)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This is to specify the minimum required SNR for data rate
- of 9Mbps on 802.11a radio, normal mode. The value should be
- in dB and in the range 0..50 dB. The default value should be 7dB."
- DEFVAL { 7 }
- ::= { orinocoWORPIfDDRS 5 }
-
- oriWORPIfDDRSMinReqSNRdot11an12Mbps OBJECT-TYPE
- SYNTAX Integer32 (1..50)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This is to specify the minimum required SNR for data rate
- of 12Mbps on 802.11a radio, normal mode. The value should be
- in dB and in the range 0..50 dB. The default value should be 9dB."
- DEFVAL { 9 }
- ::= { orinocoWORPIfDDRS 6 }
-
- oriWORPIfDDRSMinReqSNRdot11an18Mbps OBJECT-TYPE
- SYNTAX Integer32 (1..50)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This is to specify the minimum required SNR for data rate
- of 18Mbps on 802.11a radio, normal mode. The value should be
- in dB and in the range 0..50 dB. The default value should be 11dB."
- DEFVAL { 11 }
- ::= { orinocoWORPIfDDRS 7 }
-
- oriWORPIfDDRSMinReqSNRdot11an24Mbps OBJECT-TYPE
- SYNTAX Integer32 (1..50)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This is to specify the minimum required SNR for data rate
- of 24Mbps on 802.11a radio, normal mode. The value should be
- in dB and in the range 0..50 dB. The default value should be 14dB."
- DEFVAL { 14 }
- ::= { orinocoWORPIfDDRS 8 }
-
- oriWORPIfDDRSMinReqSNRdot11an36Mbps OBJECT-TYPE
- SYNTAX Integer32 (1..50)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This is to specify the minimum required SNR for data rate
- of 36Mbps on 802.11a radio, normal mode. The value should be
- in dB and in the range 0..50 dB. The default value should be 18dB."
- DEFVAL { 18 }
- ::= { orinocoWORPIfDDRS 9 }
-
- oriWORPIfDDRSMinReqSNRdot11an48Mbps OBJECT-TYPE
- SYNTAX Integer32 (1..50)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This is to specify the minimum required SNR for data rate
- of 48Mbps on 802.11a radio, normal mode. The value should be
- in dB and in the range 0..50 dB. The default value should be 22dB."
- DEFVAL { 22 }
- ::= { orinocoWORPIfDDRS 10 }
-
- oriWORPIfDDRSMinReqSNRdot11an54Mbps OBJECT-TYPE
- SYNTAX Integer32 (1..50)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This is to specify the minimum required SNR for data rate
- of 54Mbps on 802.11a radio, normal mode. The value should be
- in dB and in the range 0..50 dB. The default value should be 25dB."
- DEFVAL { 25 }
- ::= { orinocoWORPIfDDRS 11 }
-
- oriWORPIfDDRSMinReqSNRdot11at12Mbps OBJECT-TYPE
- SYNTAX Integer32 (1..50)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This is to specify the minimum required SNR for data rate
- of 12Mbps on 802.11a radio, turbo mode. The value should be
- in dB and in the range 0..50 dB. The default value should be 6dB."
- DEFVAL { 6 }
- ::= { orinocoWORPIfDDRS 12 }
-
- oriWORPIfDDRSMinReqSNRdot11at18Mbps OBJECT-TYPE
- SYNTAX Integer32 (1..50)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This is to specify the minimum required SNR for data rate
- of 18Mbps on 802.11a radio, turbo mode. The value should be
- in dB and in the range 0..50 dB. The default value should be 7dB."
- DEFVAL { 7 }
- ::= { orinocoWORPIfDDRS 13 }
-
- oriWORPIfDDRSMinReqSNRdot11at24Mbps OBJECT-TYPE
- SYNTAX Integer32 (1..50)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This is to specify the minimum required SNR for data rate
- of 24Mbps on 802.11a radio, turbo mode. The value should be
- in dB and in the range 0..50 dB. The default value should be 9dB."
- DEFVAL { 7 }
- ::= { orinocoWORPIfDDRS 14 }
-
- oriWORPIfDDRSMinReqSNRdot11at36Mbps OBJECT-TYPE
- SYNTAX Integer32 (1..50)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This is to specify the minimum required SNR for data rate
- of 36Mbps on 802.11a radio, turbo mode. The value should be
- in dB and in the range 0..50 dB. The default value should be 11dB."
- DEFVAL { 11 }
- ::= { orinocoWORPIfDDRS 15 }
-
- oriWORPIfDDRSMinReqSNRdot11at48Mbps OBJECT-TYPE
- SYNTAX Integer32 (1..50)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This is to specify the minimum required SNR for data rate
- of 48Mbps on 802.11a radio, turbo mode. The value should be
- in dB and in the range 0..50 dB. The default value should be 14dB."
- DEFVAL { 14 }
- ::= { orinocoWORPIfDDRS 16 }
-
- oriWORPIfDDRSMinReqSNRdot11at72Mbps OBJECT-TYPE
- SYNTAX Integer32 (1..50)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This is to specify the minimum required SNR for data rate
- of 72Mbps on 802.11a radio, turbo mode. The value should be
- in dB and in the range 0..50 dB. The default value should be 18dB."
- DEFVAL { 18 }
- ::= { orinocoWORPIfDDRS 17 }
-
- oriWORPIfDDRSMinReqSNRdot11at96Mbps OBJECT-TYPE
- SYNTAX Integer32 (1..50)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This is to specify the minimum required SNR for data rate
- of 96Mbps on 802.11a radio, turbo mode. The value should be
- in dB and in the range 0..50 dB. The default value should be 22dB."
- DEFVAL { 22 }
- ::= { orinocoWORPIfDDRS 18 }
-
- oriWORPIfDDRSMinReqSNRdot11at108Mbps OBJECT-TYPE
- SYNTAX Integer32 (1..50)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This is to specify the minimum required SNR for data rate
- of 108Mbps on 802.11a radio, turbo mode. The value should be
- in dB and in the range 0..50 dB. The default value should be 25dB."
- DEFVAL { 25 }
- ::= { orinocoWORPIfDDRS 19 }
-
- oriWORPIfDDRSDataRateIncAvgSNRThreshold OBJECT-TYPE
- SYNTAX Integer32 (1..50)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This is to specify average SNR threshold for data rate increase.
- The value should be in dB and in the range 0..50 dB.
- The default value should be 4 dB."
- DEFVAL { 4 }
- ::= { orinocoWORPIfDDRS 20 }
-
- oriWORPIfDDRSDataRateIncReqSNRThreshold OBJECT-TYPE
- SYNTAX Integer32 (1..50)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This is to specify average SNR threshold for data rate decrease.
- The value should be in dB and in the range 0..50 dB.
- The default value should be 6 dB."
- DEFVAL { 6 }
- ::= { orinocoWORPIfDDRS 21 }
-
- oriWORPIfDDRSDataRateDecReqSNRThreshold OBJECT-TYPE
- SYNTAX Integer32 (1..50)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This is to specify SNRreq threshold for data rate reduction.
- The value should be in dB and in the range 0..50 dB.
- The default value should be 3 dB."
- DEFVAL { 3 }
- ::= { orinocoWORPIfDDRS 22 }
-
- oriWORPIfDDRSDataRateIncPercentThreshold OBJECT-TYPE
- SYNTAX INTEGER (1..100)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object specifies the threshold percentage of retransmissions for
- DDRS data rate increase."
- DEFVAL { 2 }
- ::= { orinocoWORPIfDDRS 23 }
-
- oriWORPIfDDRSDataRateDecPercentThreshold OBJECT-TYPE
- SYNTAX INTEGER (1..100)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object specifies the threshold percentage of retransmissions for
- DDRS data rate decrease."
- DEFVAL { 10 }
- ::= { orinocoWORPIfDDRS 24 }
-
- --=============================================================================
- -- The WORP Interface Roaming Group
- --=============================================================================
-
- oriWORPIfRoamingStatus OBJECT-TYPE
- SYNTAX ObjStatus
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable/disable Roaming between BSUs."
- ::= { orinocoWORPIfRoaming 1 }
-
- oriWORPIfRoamingSlowScanThreshold OBJECT-TYPE
- SYNTAX Integer32 (0..50)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object specifies the threshold for initiating slow scanning
- procedure. The units of this object is dBs."
- DEFVAL { 12 }
- ::= { orinocoWORPIfRoaming 2 }
-
- oriWORPIfRoamingFastScanThreshold OBJECT-TYPE
- SYNTAX Integer32 (0..50)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object specifies the threshold for initiating fast scanning
- procedure. The units of this object is dBs."
- DEFVAL { 6 }
- ::= { orinocoWORPIfRoaming 3 }
-
- oriWORPIfRoamingThreshold OBJECT-TYPE
- SYNTAX Integer32 (0..50)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object specifies the threshold for roaming threshold.
- The units of this object is dBs."
- DEFVAL { 3 }
- ::= { orinocoWORPIfRoaming 4 }
-
- oriWORPIfRoamingSlowScanPercentThreshold OBJECT-TYPE
- SYNTAX INTEGER (1..100)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object specifies the threshold percentage of retransmissions for initiating slow scanning
- procedure."
- DEFVAL { 2 }
- ::= { orinocoWORPIfRoaming 5 }
-
- oriWORPIfRoamingFastScanPercentThreshold OBJECT-TYPE
- SYNTAX INTEGER (1..100)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object specifies the threshold percentage of retransmissions for initiating fast scanning
- procedure."
- DEFVAL { 10 }
- ::= { orinocoWORPIfRoaming 6 }
-
- --=============================================================================
- -- The orinocoWORPIfBSUStat sub group under orinoco WORP group - START
- --=============================================================================
-
- orinocoWORPIfBSUStatMACAddress OBJECT-TYPE
- SYNTAX MacAddress
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the MAC address of BSU to which the SU
- is registered."
- ::= { orinocoWORPIfBSUStat 1 }
-
- orinocoWORPIfBSUStatLocalTxRate OBJECT-TYPE
- SYNTAX INTEGER
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the Transmit Data Rate of the SU."
- ::= { orinocoWORPIfBSUStat 2 }
-
-
- orinocoWORPIfBSUStatRemoteTxRate OBJECT-TYPE
- SYNTAX INTEGER
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the Transmit Data Rate of the BSU
- to which the SU is registered."
- ::= { orinocoWORPIfBSUStat 3 }
-
- orinocoWORPIfBSUStatAverageLocalSignal OBJECT-TYPE
- SYNTAX Integer32 (-102..-10)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The current signal level calculated over all inbound packets.
- This variable indicates the running average of the SU's local
- signal level using the algorithm (3/4*oldvalue + 1/4*newvalue)."
- ::= { orinocoWORPIfBSUStat 4 }
-
- orinocoWORPIfBSUStatAverageLocalNoise OBJECT-TYPE
- SYNTAX Integer32 (-102..-10)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The current noise level calculated over all inbound packets.
- This variable indicates the running average of the SU's
- local noise level using the algorithm (3/4*oldvalue + 1/4*newvalue)."
- ::= { orinocoWORPIfBSUStat 5 }
-
- orinocoWORPIfBSUStatAverageRemoteSignal OBJECT-TYPE
- SYNTAX Integer32 (-102..-10)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The current remote signal level calculated over the inbound
- packets received at SU, sent by the BSU. This variable indicates the
- running average of the SU's Rx Signal level(i.e. BSU's Tx Signal level)
- all registered stations of the remote signal level using the
- algorithm (3/4*oldvalue + 1/4*newvalue)."
- ::= { orinocoWORPIfBSUStat 6 }
-
- orinocoWORPIfBSUStatAverageRemoteNoise OBJECT-TYPE
- SYNTAX Integer32 (-102..-10)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The current remote noise level calculated over the inbound
- packets received at SU, sent by the BSU. This variable indicates the
- running average of the SU's Rx Noise level(i.e. BSU's Tx Noise level)
- all registered stations of the remote noise level using the
- algorithm (3/4*oldvalue + 1/4*newvalue)."
- ::= { orinocoWORPIfBSUStat 7 }
-
- --=============================================================================
- -- The Network Group: orinocoNet
- --=============================================================================
-
- --=============================================================================
- -- The Network IP Subgroup: orinocoNetIP
- --=============================================================================
-
- oriNetworkIPConfigTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriNetworkIPConfigTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table contains the Network IP configuration for the network
- interface(s) of the device. For bridge mode, only the address
- assigned to the Ethernet interface (index 1) will be used."
- ::= { orinocoNetIP 1 }
-
- oriNetworkIPConfigTableEntry OBJECT-TYPE
- SYNTAX OriNetworkIPConfigTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents an entry for the network IP configuration
- for each interface in the system."
- INDEX { oriNetworkIPConfigTableIndex }
- ::= { oriNetworkIPConfigTable 1 }
-
- OriNetworkIPConfigTableEntry ::=
- SEQUENCE
- {
- oriNetworkIPConfigTableIndex Integer32,
- oriNetworkIPConfigIPAddress IpAddress,
- oriNetworkIPConfigSubnetMask IpAddress
- }
-
- oriNetworkIPConfigTableIndex OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents an index or interface number in the
- network IP configuration table."
- ::= { oriNetworkIPConfigTableEntry 1 }
-
- oriNetworkIPConfigIPAddress OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the IP Address of the network interface."
- ::= { oriNetworkIPConfigTableEntry 2 }
-
- oriNetworkIPConfigSubnetMask OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the subnet mask of the network interface."
- ::= { oriNetworkIPConfigTableEntry 3 }
-
- oriNetworkIPDefaultRouterIPAddress OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the IP address of the gateway or router
- of the device."
- ::= { orinocoNetIP 3 }
-
- oriNetworkIPDefaultTTL OBJECT-TYPE
- SYNTAX Integer32 (0..255)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "The default value inserted into the Time-To-Live (TTL) field of
- the IP header of datagrams originated at this entity, whenever a
- TTL value is not supplied by the transport layer protocol."
- DEFVAL { 64 }
- ::= { orinocoNetIP 4 }
-
- oriNetworkIPAddressType OBJECT-TYPE
- SYNTAX INTEGER
- {
- static(1),
- dynamic(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object identifies if the device is configured to be
- assigned a static or dynamic IP address using a DHCP client."
- DEFVAL { dynamic }
- ::= { orinocoNetIP 5 }
-
- --=============================================================================
- -- The SNMP Group: orinocoSNMP
- --=============================================================================
-
- oriSNMPReadPassword OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the read-only community name used in the
- SNMP protocol. This object is used for reading objects from the
- SNMP agent. This object should be treated as write-only and
- returned as asterisks."
- DEFVAL { "public" }
- ::= { orinocoSNMP 1 }
-
- oriSNMPReadWritePassword OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This objecgt represents the read-write community name used in
- the SNMP protocol. This object is used for reading and writing
- objects to and from the SNMP Agent. This object should be treated
- as write-only and returned as asterisks."
- DEFVAL { "public" }
- ::= { orinocoSNMP 2 }
-
- oriSNMPAuthorizedManagerCount OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object reflects the number of entries in the Management IP
- Access Table."
- ::= { orinocoSNMP 3 }
-
- oriSNMPAccessTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriSNMPAccessTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table is used configure management stations that are
- authorized to manage the device. This table applies to the
- supported management services/interfaces (SNMP, HTTP, and Telnet).
- This table is limited to 20 entries."
- ::= { orinocoSNMP 4 }
-
- oriSNMPAccessTableEntry OBJECT-TYPE
- SYNTAX OriSNMPAccessTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object identifies an entry in the Management IP Access
- Table."
- INDEX { oriSNMPAccessTableIndex }
- ::= { oriSNMPAccessTable 1 }
-
- OriSNMPAccessTableEntry ::=
- SEQUENCE
- {
- oriSNMPAccessTableIndex Integer32,
- oriSNMPAccessTableIPAddress IpAddress,
- oriSNMPAccessTableIPMask IpAddress,
- oriSNMPAccessTableInterfaceBitmask InterfaceBitmask,
- oriSNMPAccessTableComment DisplayString,
- oriSNMPAccessTableEntryStatus INTEGER
- }
-
- oriSNMPAccessTableIndex OBJECT-TYPE
- SYNTAX Integer32 (0..20)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the index for the Management IP Access
- Table."
- ::= { oriSNMPAccessTableEntry 1 }
-
- oriSNMPAccessTableIPAddress OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the IP address of the management station
- authorized to manage the device."
- ::= { oriSNMPAccessTableEntry 2 }
-
- oriSNMPAccessTableIPMask OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the IP subnet mask. This object can
- be used to grant access to a complete subnet."
- ::= { oriSNMPAccessTableEntry 3 }
-
- oriSNMPAccessTableInterfaceBitmask OBJECT-TYPE
- SYNTAX InterfaceBitmask
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to control the interface access for each
- table entry in the Management IP Access Table."
- ::= { oriSNMPAccessTableEntry 4 }
-
- oriSNMPAccessTableComment OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used for an optional comment associated to the
- Management IP Access Table entry."
- ::= { oriSNMPAccessTableEntry 5 }
-
- oriSNMPAccessTableEntryStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2),
- delete(3),
- create(4)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable, disable, delete, or create an
- entry in the Management IP Access Table."
- ::= { oriSNMPAccessTableEntry 6 }
-
- oriSNMPTrapHostTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriSNMPTrapHostTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table contains the information regarding the trap host that
- will receive SNMP traps sent by the device. This table is limited
- 10 entries."
- ::= { orinocoSNMP 5 }
-
- oriSNMPTrapHostTableEntry OBJECT-TYPE
- SYNTAX OriSNMPTrapHostTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object identifies an entry in the SNMP Trap Host Table."
- INDEX { oriSNMPTrapHostTableIndex }
- ::= { oriSNMPTrapHostTable 1 }
-
- OriSNMPTrapHostTableEntry ::=
- SEQUENCE
- {
- oriSNMPTrapHostTableIndex Integer32,
- oriSNMPTrapHostTableIPAddress IpAddress,
- oriSNMPTrapHostTablePassword DisplayString,
- oriSNMPTrapHostTableComment DisplayString,
- oriSNMPTrapHostTableEntryStatus INTEGER
- }
-
- oriSNMPTrapHostTableIndex OBJECT-TYPE
- SYNTAX Integer32 (0..10)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used as an index for the SNMP Trap Host Table."
- ::= { oriSNMPTrapHostTableEntry 1 }
-
- oriSNMPTrapHostTableIPAddress OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the IP address of the management station
- that will receive SNMP Traps from the device."
- ::= { oriSNMPTrapHostTableEntry 2 }
-
- oriSNMPTrapHostTablePassword OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the password that is sent with the SNMP
- trap messages to allow the host to accept or reject the traps.
- The trap host will only accept SNMP traps if this password matches
- the host's password. This object should be treated as write-only
- and returned as asterisks."
- ::= { oriSNMPTrapHostTableEntry 3 }
-
- oriSNMPTrapHostTableComment OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used for an optional comment associated to the
- SNMP Trap Host Table entry."
- ::= { oriSNMPTrapHostTableEntry 4 }
-
- oriSNMPTrapHostTableEntryStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2),
- delete(3),
- create(4)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable, disable, delete, create an
- entry in the SNMP Trap Host Table."
- ::= { oriSNMPTrapHostTableEntry 5 }
-
- oriSNMPInterfaceBitmask OBJECT-TYPE
- SYNTAX InterfaceBitmask
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to control the interface access for SNMP
- based management (not HTTP and Telnet)."
- ::= { orinocoSNMP 7 }
-
- oriSNMPErrorMessage OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used to provide additional information in case of
- an SNMP error."
- ::= { orinocoSNMP 8 }
-
- oriSNMPAccessTableStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable the Management IP Access
- Table. If this object is disabled, the check based on source IP
- address for the enteries in the Management IP Access Table will not
- be performed."
- ::= { orinocoSNMP 9 }
-
- oriSNMPTrapType OBJECT-TYPE
- SYNTAX INTEGER
- {
- snmp-v1(1),
- snmp-v2c(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to configure the SNMP trap/notification type
- that will be generated."
- DEFVAL { snmp-v1 }
- ::= { orinocoSNMP 10 }
-
- oriSNMPSecureManagementStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable the secure Management
- feature for the Access Point. With this object enabled, view
- based access control will be enforced on all forms of management
- including SNMPv1/v2c, HTTP, WEB, HTTPS, SSH, serial, and Telnet.
-
- Also SNMPv3 user security model will be enabled. The default SNMPv3
- user is defined as userName 'administrator', with SHA authentication
- and DES privacy protocols."
- DEFVAL { disable }
- ::= { orinocoSNMP 11 }
-
- oriSNMPV3AuthPassword OBJECT-TYPE
- SYNTAX DisplayString (SIZE(6..32))
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the SNMPv3 administrator authentication
- password. This object should be treated as write-only and returned
- as asterisks."
- DEFVAL { "public" }
- ::= { orinocoSNMP 12 }
-
- oriSNMPV3PrivPassword OBJECT-TYPE
- SYNTAX DisplayString (SIZE(6..32))
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the SNMPv3 administrator privacy password.
- This object should be treated as write-only and returned as asterisks."
- DEFVAL { "public" }
- ::= { orinocoSNMP 13 }
-
- --=============================================================================
- -- The Protocol Filtering Subgroup: orinocoProtocolFilter
- --=============================================================================
-
- oriProtocolFilterOperationType OBJECT-TYPE
- SYNTAX INTEGER
- {
- passthru(1),
- block(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to passthru (allow) or block (deny) packets
- with protocols in the protocol filter table."
- DEFVAL { block }
- ::= { orinocoProtocolFilter 1 }
-
- oriProtocolFilterTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriProtocolFilterTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table contains the two byte hexadecimal values of the
- protocols. The packets whose protocol field matches with any of
- the entries in this table will be forwarded or dropped based on
- value of oriProtocolFilterFlag. This table is limited to 256
- ethernet protocols (enteries)."
- ::= { orinocoProtocolFilter 2 }
-
- oriProtocolFilterTableEntry OBJECT-TYPE
- SYNTAX OriProtocolFilterTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents an entry in the protocol filter table."
- INDEX { oriProtocolFilterTableIndex }
- ::= { oriProtocolFilterTable 1 }
-
- OriProtocolFilterTableEntry ::=
- SEQUENCE
- {
- oriProtocolFilterTableIndex Integer32,
- oriProtocolFilterProtocol OCTET STRING,
- oriProtocolFilterProtocolComment DisplayString,
- oriProtocolFilterTableEntryStatus INTEGER,
- oriProtocolFilterTableInterfaceBitmask InterfaceBitmask,
- oriProtocolFilterProtocolString DisplayString
- }
-
- oriProtocolFilterTableIndex OBJECT-TYPE
- SYNTAX Integer32 (0..256)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used to index the protocol filter table."
- ::= { oriProtocolFilterTableEntry 1 }
-
- oriProtocolFilterProtocol OBJECT-TYPE
- SYNTAX OCTET STRING (SIZE(2))
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents a two byte hexadecimal value for the
- Ethernet protocol to be filtered (the protocol field of the
- Ethernet packet)."
- ::= { oriProtocolFilterTableEntry 2 }
-
- oriProtocolFilterProtocolComment OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used as an optional comment for the ethernet
- protocol to be filtered."
- ::= { oriProtocolFilterTableEntry 3 }
-
- oriProtocolFilterTableEntryStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2),
- delete(3),
- create(4)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable, disable, delete, create the
- Ethernet protocols in this table."
- ::= { oriProtocolFilterTableEntry 4 }
-
- oriProtocolFilterTableInterfaceBitmask OBJECT-TYPE
- SYNTAX InterfaceBitmask
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is isued to control protocol filtering per interface
- for each entry in this table."
- ::= { oriProtocolFilterTableEntry 5 }
-
- oriProtocolFilterProtocolString OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the value in the protocol field of the
- Ethernet packet. The value is of 4-digit Hex format.
- Example: The value of IP protocol is 0800.
- The value of ARP protocol is 0806."
- ::= { oriProtocolFilterTableEntry 6}
-
- oriProtocolFilterInterfaceBitmask OBJECT-TYPE
- SYNTAX InterfaceBitmask
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is isued to control protocol filtering per interface
- for the table."
- ::= { orinocoProtocolFilter 3 }
-
- --=============================================================================
- -- The Access Control Subgroup: orinocoAccessControl
- --=============================================================================
-
- oriAccessControlStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable MAC Access Control
- feature/filter in the device."
- DEFVAL { disable }
- ::= { orinocoAccessControl 1 }
-
- oriAccessControlOperationType OBJECT-TYPE
- SYNTAX INTEGER
- {
- passthru(1),
- block(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This flag determines whether the stations with MAC addresses
- listed in the access control table will be allowed or denied
- access. This flag is used only if oriAccessControlStatus is
- enabled. This table is limited to 1000 MAC Address entries."
- DEFVAL { passthru }
- ::= { orinocoAccessControl 2 }
-
- oriAccessControlTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriAccessControlEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table contains the information about MAC addresses of the
- wireless stations that are either allowed or disallowed access
- (based on oriAccessControlOperation) through this device.
- This table is used only if oriAccessControlStatus is enabled."
- ::= { orinocoAccessControl 3 }
-
- oriAccessControlEntry OBJECT-TYPE
- SYNTAX OriAccessControlEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents the entry in the access control table."
- INDEX { oriAccessControlTableIndex }
- ::= { oriAccessControlTable 1 }
-
- OriAccessControlEntry ::=
- SEQUENCE
- {
- oriAccessControlTableIndex Integer32,
- oriAccessControlTableMACAddress PhysAddress,
- oriAccessControlTableComment DisplayString,
- oriAccessControlTableEntryStatus INTEGER
- }
-
- oriAccessControlTableIndex OBJECT-TYPE
- SYNTAX Integer32 (0..1000)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used as an index for the access control table."
- ::= { oriAccessControlEntry 1 }
-
- oriAccessControlTableMACAddress OBJECT-TYPE
- SYNTAX PhysAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the MAC address of the wireless station
- that can access the device."
- ::= { oriAccessControlEntry 2 }
-
- oriAccessControlTableComment OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used as an optional comment associated to the
- access control table entry."
- ::= { oriAccessControlEntry 3 }
-
- oriAccessControlTableEntryStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2),
- delete(3),
- create(4)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable, disable, delete, create the entries
- in the Access Control Table."
- ::= { oriAccessControlEntry 4 }
-
- --=============================================================================
- -- The Static MAC Address Filter Subgroup: orinocoStaticMACAddressFilter
- --=============================================================================
-
- oriStaticMACAddressFilterTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriStaticMACAddressFilterEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table provides the MAC address of the stations on the wired
- and the wireless interface; the MAC addresses will be given in
- pairs. Stations listed in the Static MAC Address filter will
- have no traffic forwarded by the device. This way Multicast
- traffic exchanged between stations or servers can be prevented,
- from being transmitted over the wireless medium when both stations
- are actually located on the wired backbone. This table is limited
- to 200 entries."
- ::= { orinocoStaticMACAddressFilter 1 }
-
- oriStaticMACAddressFilterEntry OBJECT-TYPE
- SYNTAX OriStaticMACAddressFilterEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object identifies the entry in the Static MAC address
- filter table."
- INDEX { oriStaticMACAddressFilterTableIndex }
- ::= { oriStaticMACAddressFilterTable 1 }
-
- OriStaticMACAddressFilterEntry ::=
- SEQUENCE
- {
- oriStaticMACAddressFilterTableIndex Integer32,
- oriStaticMACAddressFilterWiredAddress PhysAddress,
- oriStaticMACAddressFilterWiredMask PhysAddress,
- oriStaticMACAddressFilterWirelessAddress PhysAddress,
- oriStaticMACAddressFilterWirelessMask PhysAddress,
- oriStaticMACAddressFilterTableEntryStatus INTEGER,
- oriStaticMACAddressFilterComment DisplayString
- }
-
- oriStaticMACAddressFilterTableIndex OBJECT-TYPE
- SYNTAX Integer32 (0..200)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used as an index for the Static MAC address
- filter table."
- ::= { oriStaticMACAddressFilterEntry 1 }
-
- oriStaticMACAddressFilterWiredAddress OBJECT-TYPE
- SYNTAX PhysAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the MAC address of the station on the
- wired interface of the device."
- ::= { oriStaticMACAddressFilterEntry 2 }
-
- oriStaticMACAddressFilterWiredMask OBJECT-TYPE
- SYNTAX PhysAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This mask determines the presence of wildcard characters in the
- MAC address of the station on the wired interface. The value F
- (hex digit) in the mask indicates the presence of a wildcard
- character and the value 0 indicates its absence."
- ::= { oriStaticMACAddressFilterEntry 3 }
-
- oriStaticMACAddressFilterWirelessAddress OBJECT-TYPE
- SYNTAX PhysAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the MAC address of the station on the
- wireless interface."
- ::= { oriStaticMACAddressFilterEntry 4 }
-
- oriStaticMACAddressFilterWirelessMask OBJECT-TYPE
- SYNTAX PhysAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "The mask that determines the presence of wildcard characters in
- the MAC address of the station on the wireless side. The value F
- (hex digit) indicates the presence of a wildcard character and the
- hex digit 0 indicates its absense."
- ::= { oriStaticMACAddressFilterEntry 5 }
-
- oriStaticMACAddressFilterTableEntryStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2),
- delete(3),
- create(4)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable, disable, delete, create an entry
- in the Static MAC Address Table."
- ::= { oriStaticMACAddressFilterEntry 6 }
-
- oriStaticMACAddressFilterComment OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used for an optional comment associated to the
- access control table entry."
- ::= { oriStaticMACAddressFilterEntry 7 }
-
- --=============================================================================
- -- The Storm Threshold Subgroup: orinocoStormThreshold
- --=============================================================================
-
- oriBroadcastAddressThreshold OBJECT-TYPE
- SYNTAX Integer32 (0..255)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "If broadcast rate from any device (identified by its MAC address)
- exceeds the limit specified by this value, the device will
- ignore all subsequent messages issued by the particular network
- device, or ignore all messages of that type. Valid values for
- address threshold is between 0 - 255 frames per second. Initial
- Value is 0 (Disable Storm Threshold Protection)."
- DEFVAL { 0 }
- ::= { orinocoStormThreshold 1 }
-
- oriMulticastAddressThreshold OBJECT-TYPE
- SYNTAX Integer32 (0..255)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "If multicast rate from any device (identified by its MAC address)
- exceeds the limit specified by this value, the device will
- ignore all subsequent messages issued by the particular network
- device, or ignore all messages of that type. Valid values for
- address threshold is between 0 - 255 frames per second. Initial
- Value is 0 (Disable Storm Threshold Protection)."
- DEFVAL { 0 }
- ::= { orinocoStormThreshold 2 }
-
- oriStormThresholdTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriStormThresholdTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "The table containing broadcast and multicast threshold values for
- each interface."
- ::= { orinocoStormThreshold 3 }
-
- oriStormThresholdTableEntry OBJECT-TYPE
- SYNTAX OriStormThresholdTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents an entry in the storm threshold filter
- table."
- INDEX { ifIndex }
- ::= { oriStormThresholdTable 1 }
-
- OriStormThresholdTableEntry ::=
- SEQUENCE
- {
- oriStormThresholdIfBroadcast Integer32,
- oriStormThresholdIfMulticast Integer32
- }
-
- oriStormThresholdIfBroadcast OBJECT-TYPE
- SYNTAX Integer32 (0..9999)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This parameter specifies a set of Broadcast Storm thresholds for
- each interface/port of the device, identifying separate
- values for the number of Broadcast messages/second. Default value
- is zero, which means disabled."
- DEFVAL { 0 }
- ::= { oriStormThresholdTableEntry 1 }
-
- oriStormThresholdIfMulticast OBJECT-TYPE
- SYNTAX Integer32 (0..9999)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This parameter specifies a set of Multicast Storm thresholds for
- each interface/port of the device, identifying separate
- values for the number of Multicast messages/second. Default value
- is zero, which means disabled."
- DEFVAL { 0 }
- ::= { oriStormThresholdTableEntry 2 }
-
- --=============================================================================
- -- The Port Filtering Subgroup: orinocoPortFilter
- -- Filtering per Interface based on IP Address and Port Number.
- --=============================================================================
-
- oriPortFilterStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable port filtering."
- DEFVAL { disable }
- ::= { orinocoPortFilter 1 }
-
- oriPortFilterOperationType OBJECT-TYPE
- SYNTAX INTEGER
- {
- passthru(1),
- block(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object determines whether the stations with ports
- listed in the port filter table must be allowed (passthru) or
- denied (block) to access the device. This object is used only if
- oriPacketFilterStatus is enabled."
- DEFVAL { passthru }
- ::= { orinocoPortFilter 2 }
-
- oriPortFilterTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriPortFilterTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table contains the Port number of packets to be filtered.
- The packets whose port field matches with any of the enabled entries in
- this table will be blocked (dropped). This table is limited to
- 256 entries."
- ::= { orinocoPortFilter 3 }
-
- oriPortFilterTableEntry OBJECT-TYPE
- SYNTAX OriPortFilterTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This parameter represents the entry in the port filter table."
- INDEX { oriPortFilterTableEntryIndex }
- ::= { oriPortFilterTable 1 }
-
- OriPortFilterTableEntry ::=
- SEQUENCE
- {
- oriPortFilterTableEntryIndex Integer32,
- oriPortFilterTableEntryPort Integer32,
- oriPortFilterTableEntryPortType INTEGER,
- oriPortFilterTableEntryInterfaceBitmask InterfaceBitmask,
- oriPortFilterTableEntryComment DisplayString,
- oriPortFilterTableEntryStatus INTEGER
- }
-
- oriPortFilterTableEntryIndex OBJECT-TYPE
- SYNTAX Integer32 (0..256)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used as the index for the port filter table. This
- table supports up to 256 entries."
- ::= { oriPortFilterTableEntry 1 }
-
- oriPortFilterTableEntryPort OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the port number of the packets to be
- filtered."
- ::= { oriPortFilterTableEntry 2 }
-
- oriPortFilterTableEntryPortType OBJECT-TYPE
- SYNTAX INTEGER
- {
- tcp(1),
- udp(2),
- both(3)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object specifies the port type."
- ::= { oriPortFilterTableEntry 3 }
-
- oriPortFilterTableEntryInterfaceBitmask OBJECT-TYPE
- SYNTAX InterfaceBitmask
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to control port filtering per interface for
- each entry in the table."
- ::= { oriPortFilterTableEntry 4 }
-
- oriPortFilterTableEntryComment OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used for an optional comment associated to the
- port filter table entry."
- ::= { oriPortFilterTableEntry 5 }
-
- oriPortFilterTableEntryStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2),
- delete(3),
- create(4)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable, disable, delete, create an entry
- in the Port Filter Table."
- ::= { oriPortFilterTableEntry 6 }
-
- --=============================================================================
- -- The Advanced Bridge Filtering Subgroup: orinocoAdvancedFiltering
- --=============================================================================
-
- oriBroadcastFilteringTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriBroadcastFilteringTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "The table entries for broadcast filters. This table shall contain
- 5 entries."
- ::= { orinocoAdvancedFiltering 1 }
-
- oriBroadcastFilteringTableEntry OBJECT-TYPE
- SYNTAX OriBroadcastFilteringTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents an entry in the broadcast filtering
- table."
- INDEX { oriBroadcastFilteringTableIndex }
- ::= { oriBroadcastFilteringTable 1 }
-
- OriBroadcastFilteringTableEntry ::=
- SEQUENCE
- {
- oriBroadcastFilteringTableIndex Integer32,
- oriBroadcastFilteringProtocolName DisplayString,
- oriBroadcastFilteringDirection INTEGER,
- oriBroadcastFilteringTableEntryStatus INTEGER
- }
-
- oriBroadcastFilteringTableIndex OBJECT-TYPE
- SYNTAX Integer32 (0..5)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the index of the Broadcast Filtering
- table."
- ::= { oriBroadcastFilteringTableEntry 1 }
-
- oriBroadcastFilteringProtocolName OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the broadcast protocol name to
- be filtered."
- ::= { oriBroadcastFilteringTableEntry 2 }
-
- oriBroadcastFilteringDirection OBJECT-TYPE
- SYNTAX INTEGER
- {
- ethernetToWireless(1),
- wirelessToEthernet(2),
- both(3)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the direction of the broadcast filter.
- The filter can be enabled for Ethernet to Wireless, Wireless
- to Ethernet, or both directions."
- ::= { oriBroadcastFilteringTableEntry 3 }
-
- oriBroadcastFilteringTableEntryStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable the broadcast filter
- table enteries."
- ::= { oriBroadcastFilteringTableEntry 4 }
-
- --=============================================================================
- -- The Packet Forwarding Subgroup: orinocoPacketForwarding
- --=============================================================================
-
- oriPacketForwardingStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable the Packet Forwarding
- feature."
- DEFVAL { disable }
- ::= { orinocoPacketForwarding 1 }
-
- oriPacketForwardingMACAddress OBJECT-TYPE
- SYNTAX MacAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the MAC Address to which all frames will be
- forwarded by the device."
- ::= { orinocoPacketForwarding 2 }
-
- oriPacketForwardingInterface OBJECT-TYPE
- SYNTAX Integer32 (0..15)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to configure the interface or port that frames
- will be forwarded to. If this object is not configured, value set
- to zero, then the bridge will forward the packets on the interface
- or port the MAC address was learned on. If this object is not
- configured, value set to zero, and the bridge has not yet learned the
- MAC address then the frames will be forwarded on all interfaces and
- ports."
- ::= { orinocoPacketForwarding 3 }
-
- --=============================================================================
- -- The IntraBSS Traffic Control Subgroup
- --=============================================================================
-
- oriIBSSTrafficOperation OBJECT-TYPE
- SYNTAX INTEGER
- {
- passthru(1),
- block(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to control IntraBSS Traffic. If this object
- is set to the passthru, then IBSS traffic will be allowed; if this
- object is set to block, then IBSS traffic will be denied."
- DEFVAL { passthru }
- ::= { orinocoIBSSTraffic 1 }
-
- --=============================================================================
- -- The IntraCellBlocking Subgroup
- --=============================================================================
-
- oriIntraCellBlockingStatus OBJECT-TYPE
- SYNTAX ObjStatus
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable/disable IntraCell Blocking/Filtering."
- DEFVAL { disable }
- ::= { orinocoIntraCellBlocking 1 }
-
- oriIntraCellBlockingMACTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriIntraCellBlockingMACTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "The MAC table entries for IntraCell Blocking filters. This table
- can contain up to a maximum of 250 entries."
- ::= { orinocoIntraCellBlocking 2 }
-
- oriIntraCellBlockingMACTableEntry OBJECT-TYPE
- SYNTAX OriIntraCellBlockingMACTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents the entry in the IntraCell Blocking MAC Table."
- INDEX { oriIntraCellBlockingMACTableIndex }
- ::= { oriIntraCellBlockingMACTable 1 }
-
- OriIntraCellBlockingMACTableEntry ::=
- SEQUENCE
- {
- oriIntraCellBlockingMACTableIndex Integer32,
- oriIntraCellBlockingMACTableMACAddress PhysAddress,
- oriIntraCellBlockingMACTableGroupID1 ObjStatusActive,
- oriIntraCellBlockingMACTableGroupID2 ObjStatusActive,
- oriIntraCellBlockingMACTableGroupID3 ObjStatusActive,
- oriIntraCellBlockingMACTableGroupID4 ObjStatusActive,
- oriIntraCellBlockingMACTableGroupID5 ObjStatusActive,
- oriIntraCellBlockingMACTableGroupID6 ObjStatusActive,
- oriIntraCellBlockingMACTableGroupID7 ObjStatusActive,
- oriIntraCellBlockingMACTableGroupID8 ObjStatusActive,
- oriIntraCellBlockingMACTableGroupID9 ObjStatusActive,
- oriIntraCellBlockingMACTableGroupID10 ObjStatusActive,
- oriIntraCellBlockingMACTableGroupID11 ObjStatusActive,
- oriIntraCellBlockingMACTableGroupID12 ObjStatusActive,
- oriIntraCellBlockingMACTableGroupID13 ObjStatusActive,
- oriIntraCellBlockingMACTableGroupID14 ObjStatusActive,
- oriIntraCellBlockingMACTableGroupID15 ObjStatusActive,
- oriIntraCellBlockingMACTableGroupID16 ObjStatusActive,
- oriIntraCellBlockingMACTableEntryStatus INTEGER
- }
-
- oriIntraCellBlockingMACTableIndex OBJECT-TYPE
- SYNTAX Integer32 (1..250)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used as the index to the IntraCell Blocking MAC Table."
- ::= { oriIntraCellBlockingMACTableEntry 1 }
-
- oriIntraCellBlockingMACTableMACAddress OBJECT-TYPE
- SYNTAX PhysAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the MAC address of the SU which is allowed to
- communicate with other SUs with the same group ID."
- ::= { oriIntraCellBlockingMACTableEntry 2 }
-
- oriIntraCellBlockingMACTableGroupID1 OBJECT-TYPE
- SYNTAX ObjStatusActive
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to activate/deactivate Group ID 1."
- DEFVAL { inactive }
- ::= { oriIntraCellBlockingMACTableEntry 3 }
-
- oriIntraCellBlockingMACTableGroupID2 OBJECT-TYPE
- SYNTAX ObjStatusActive
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to activate/deactivate Group ID 2."
- DEFVAL { inactive }
- ::= { oriIntraCellBlockingMACTableEntry 4 }
-
- oriIntraCellBlockingMACTableGroupID3 OBJECT-TYPE
- SYNTAX ObjStatusActive
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to activate/deactivate Group ID 3."
- DEFVAL { inactive }
- ::= { oriIntraCellBlockingMACTableEntry 5 }
-
- oriIntraCellBlockingMACTableGroupID4 OBJECT-TYPE
- SYNTAX ObjStatusActive
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to activate/deactivate Group ID 4."
- DEFVAL { inactive }
- ::= { oriIntraCellBlockingMACTableEntry 6 }
-
- oriIntraCellBlockingMACTableGroupID5 OBJECT-TYPE
- SYNTAX ObjStatusActive
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to activate/deactivate Group ID 5."
- DEFVAL { inactive }
- ::= { oriIntraCellBlockingMACTableEntry 7 }
-
- oriIntraCellBlockingMACTableGroupID6 OBJECT-TYPE
- SYNTAX ObjStatusActive
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to activate/deactivate Group ID 6."
- DEFVAL { inactive }
- ::= { oriIntraCellBlockingMACTableEntry 8 }
-
- oriIntraCellBlockingMACTableGroupID7 OBJECT-TYPE
- SYNTAX ObjStatusActive
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to activate/deactivate Group ID 7."
- DEFVAL { inactive }
- ::= { oriIntraCellBlockingMACTableEntry 9 }
-
- oriIntraCellBlockingMACTableGroupID8 OBJECT-TYPE
- SYNTAX ObjStatusActive
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to activate/deactivate Group ID 8."
- DEFVAL { inactive }
- ::= { oriIntraCellBlockingMACTableEntry 10 }
-
- oriIntraCellBlockingMACTableGroupID9 OBJECT-TYPE
- SYNTAX ObjStatusActive
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to activate/deactivate Group ID 9."
- DEFVAL { inactive }
- ::= { oriIntraCellBlockingMACTableEntry 11 }
-
- oriIntraCellBlockingMACTableGroupID10 OBJECT-TYPE
- SYNTAX ObjStatusActive
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to activate/deactivate Group ID 10."
- DEFVAL { inactive }
- ::= { oriIntraCellBlockingMACTableEntry 12 }
-
- oriIntraCellBlockingMACTableGroupID11 OBJECT-TYPE
- SYNTAX ObjStatusActive
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to activate/deactivate Group ID 11."
- DEFVAL { inactive }
- ::= { oriIntraCellBlockingMACTableEntry 13 }
-
- oriIntraCellBlockingMACTableGroupID12 OBJECT-TYPE
- SYNTAX ObjStatusActive
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to activate/deactivate Group ID 12."
- DEFVAL { inactive }
- ::= { oriIntraCellBlockingMACTableEntry 14 }
-
- oriIntraCellBlockingMACTableGroupID13 OBJECT-TYPE
- SYNTAX ObjStatusActive
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to activate/deactivate Group ID 13."
- DEFVAL { inactive }
- ::= { oriIntraCellBlockingMACTableEntry 15 }
-
- oriIntraCellBlockingMACTableGroupID14 OBJECT-TYPE
- SYNTAX ObjStatusActive
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to activate/deactivate Group ID 14."
- DEFVAL { inactive }
- ::= { oriIntraCellBlockingMACTableEntry 16 }
-
- oriIntraCellBlockingMACTableGroupID15 OBJECT-TYPE
- SYNTAX ObjStatusActive
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to activate/deactivate Group ID 15."
- DEFVAL { inactive }
- ::= { oriIntraCellBlockingMACTableEntry 17 }
-
- oriIntraCellBlockingMACTableGroupID16 OBJECT-TYPE
- SYNTAX ObjStatusActive
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to activate/deactivate Group ID 16."
- DEFVAL { inactive }
- ::= { oriIntraCellBlockingMACTableEntry 18 }
-
- oriIntraCellBlockingMACTableEntryStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2),
- delete(3),
- create(4)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable, disable, delete, create the entries
- in the IntraCell Blocking MAC Table."
- DEFVAL { enable }
- ::= { oriIntraCellBlockingMACTableEntry 19 }
-
- oriIntraCellBlockingGroupTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriIntraCellBlockingGroupTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "The Group table entries for IntraCell Blocking Group IDs.
- This table can contain a maximum of 16 entries."
- ::= { orinocoIntraCellBlocking 3 }
-
- oriIntraCellBlockingGroupTableEntry OBJECT-TYPE
- SYNTAX OriIntraCellBlockingGroupTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents the entry in the IntraCell Blocking
- Group Table."
- INDEX { oriIntraCellBlockingGroupTableIndex }
- ::= { oriIntraCellBlockingGroupTable 1 }
-
- OriIntraCellBlockingGroupTableEntry ::=
- SEQUENCE
- {
- oriIntraCellBlockingGroupTableIndex Integer32,
- oriIntraCellBlockingGroupTableName DisplayString,
- oriIntraCellBlockingGroupTableEntryStatus INTEGER
- }
-
- oriIntraCellBlockingGroupTableIndex OBJECT-TYPE
- SYNTAX Integer32 (1..16)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used as the index to the IntraCell Blocking
- Group Table."
- ::= { oriIntraCellBlockingGroupTableEntry 1 }
-
- oriIntraCellBlockingGroupTableName OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the group name."
- ::= { oriIntraCellBlockingGroupTableEntry 2 }
-
- oriIntraCellBlockingGroupTableEntryStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2),
- delete(3),
- create(4)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable, disable, delete, create the entries
- in the IntraCell Blocking Group Table."
- DEFVAL { disable }
- ::= { oriIntraCellBlockingGroupTableEntry 3 }
-
- --=============================================================================
- -- Packet Forwarding to Security Gateway Subgroup: orinocoSecurityGw
- --=============================================================================
-
- oriSecurityGwStatus OBJECT-TYPE
- SYNTAX ObjStatus
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable/disable the Security Gateway feature."
- DEFVAL { disable }
- ::= { orinocoSecurityGw 1 }
-
- oriSecurityGwMac OBJECT-TYPE
- SYNTAX MacAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the Security Gateway MAC Address to which
- all frames will be forwarded by the device."
- ::= { orinocoSecurityGw 2 }
-
- --=============================================================================
- -- The RADIUS Group: orinocoRADIUS
- --=============================================================================
-
- oriRADIUSClientInvalidServerAddress OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This counter represents the total number of RADIUS access-response
- messages received from an unknown address since system startup."
- ::= { orinocoRADIUS 3 }
-
- oriRADIUSMACAccessControl OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enables RADIUS Access Control based on
- wireless stations MAC Address."
- DEFVAL { disable }
- ::= { orinocoRADIUS 4 }
-
- oriRADIUSAuthorizationLifeTime OBJECT-TYPE
- SYNTAX Integer32 (0|7200..43200)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the authorization lifetime for a certain
- MAC based RADIUS authenticated client. A value of zero (0) means that
- re-authorization is disabled. The units for this object is seconds."
- DEFVAL { 0 }
- ::= { orinocoRADIUS 5 }
-
- oriRADIUSMACAddressFormat OBJECT-TYPE
- SYNTAX INTEGER
- {
- dashDelimited(1),
- colonDelimited(2),
- singleDashDelimited(3),
- noDelimiter(4)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to configure the MAC Address format that is to be
- used for communication with the RADIUS Server.
- Examples of MAC Address Format are:
- - Dash Delimited: 00-11-22-AA-BB-CC
- - Colon Delimited: 00:11:22:AA:BB:CC
- - Single Dash Delimited: 001122-AABBCC
- - No Delimiter: 001122AABBCC"
- DEFVAL { dashDelimited }
- ::= { orinocoRADIUS 6 }
-
- oriRADIUSLocalUserStatus OBJECT-TYPE
- SYNTAX ObjStatus
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable/disable local user support when RADIUS
- based management is enabled."
- DEFVAL { disable }
- ::= { orinocoRADIUS 7 }
-
- oriRADIUSLocalUserPassword OBJECT-TYPE
- SYNTAX DisplayString (SIZE(6..32))
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is the password to access the device when using the
- local username - root. This object should be treated as write-only and
- returned as asterisks."
- DEFVAL { "public" }
- ::= { orinocoRADIUS 8 }
-
- oriRADIUSbasedManagementAccessProfile OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to configure the RADIUS Server profile that will
- be used for RADIUS based management access. The RADIUS profile is
- defined in the RADIUS Server Table in the orinocoRADIUSSvrProfile
- group."
- ::= { orinocoRADIUS 9 }
-
- --=============================================================================
- -- The RADIUS Authentication Group: orinocoRADIUSAuth
- --=============================================================================
-
- oriRADIUSAuthServerTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriRADIUSAuthServerTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table represents the RADIUS servers that the device will
- communicated with for client authentication. Usually this table
- should have two members representing the primary and secondary
- (backup) RADIUS Authentication Servers."
- ::= { orinocoRADIUSAuth 1 }
-
- oriRADIUSAuthServerTableEntry OBJECT-TYPE
- SYNTAX OriRADIUSAuthServerTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents an entry in the RADIUS Authentication
- Server Table."
- INDEX { oriRADIUSAuthServerTableIndex }
- ::= { oriRADIUSAuthServerTable 1 }
-
- OriRADIUSAuthServerTableEntry ::=
- SEQUENCE
- {
- oriRADIUSAuthServerTableIndex Integer32,
- oriRADIUSAuthServerType INTEGER,
- oriRADIUSAuthServerTableEntryStatus INTEGER,
- oriRADIUSAuthServerIPAddress IpAddress,
- oriRADIUSAuthServerDestPort Integer32,
- oriRADIUSAuthServerSharedSecret DisplayString,
- oriRADIUSAuthServerResponseTime Integer32,
- oriRADIUSAuthServerMaximumRetransmission Integer32,
- oriRADIUSAuthClientAccessRequests Counter32,
- oriRADIUSAuthClientAccessRetransmissions Counter32,
- oriRADIUSAuthClientAccessAccepts Counter32,
- oriRADIUSAuthClientAccessChallenges Counter32,
- oriRADIUSAuthClientAccessRejects Counter32,
- oriRADIUSAuthClientMalformedAccessResponses Counter32,
- oriRADIUSAuthClientAuthInvalidAuthenticators Counter32,
- oriRADIUSAuthClientTimeouts Counter32,
- oriRADIUSAuthServerNameOrIPAddress DisplayString,
- oriRADIUSAuthServerAddressingFormat INTEGER
- }
-
- oriRADIUSAuthServerTableIndex OBJECT-TYPE
- SYNTAX Integer32 (1..4)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used as an index to the RADIUS Authentication
- Server Table."
- ::= { oriRADIUSAuthServerTableEntry 1 }
-
- oriRADIUSAuthServerType OBJECT-TYPE
- SYNTAX INTEGER
- {
- authentication(1),
- accounting(2),
- authAndAcct(3),
- authdot1x(4)
- }
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object indicates if the RADIUS server will provide
- Authentication service, Accounting service, or both."
- ::= { oriRADIUSAuthServerTableEntry 2 }
-
- oriRADIUSAuthServerTableEntryStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object identifies if the RADIUS server entry is enabled or
- disabled."
- ::= { oriRADIUSAuthServerTableEntry 3 }
-
- oriRADIUSAuthServerIPAddress OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-write
- STATUS deprecated
- DESCRIPTION
- "This object represents the IP address of the RADIUS server."
- ::= { oriRADIUSAuthServerTableEntry 4 }
-
- oriRADIUSAuthServerDestPort OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the RADIUS server authentication port -
- the default value is 1812."
- DEFVAL { 1812 }
- ::= { oriRADIUSAuthServerTableEntry 5 }
-
- oriRADIUSAuthServerSharedSecret OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the shared secret between the RADIUS
- server and client. This object should be treated as write-only
- and returned as asterisks."
- ::= { oriRADIUSAuthServerTableEntry 6 }
-
- oriRADIUSAuthServerResponseTime OBJECT-TYPE
- SYNTAX Integer32 (1..10)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the time (in seconds) for which the
- RADIUS client will wait, until another authentication request is
- sent to the server."
- DEFVAL { 3 }
- ::= { oriRADIUSAuthServerTableEntry 7 }
-
- oriRADIUSAuthServerMaximumRetransmission OBJECT-TYPE
- SYNTAX Integer32 (0..4)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the number of retransmissions of
- authentication requests by the RADIUS Client to the Server."
- DEFVAL { 3 }
- ::= { oriRADIUSAuthServerTableEntry 8 }
-
- oriRADIUSAuthClientAccessRequests OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of RADIUS Access Requests
- messages transmitted from the client to the server since client
- startup."
- ::= { oriRADIUSAuthServerTableEntry 9 }
-
- oriRADIUSAuthClientAccessRetransmissions OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of RADIUS Access Requests
- retransmitted by the client to the server since system startup."
- ::= { oriRADIUSAuthServerTableEntry 10 }
-
- oriRADIUSAuthClientAccessAccepts OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object indicates the number of RADIUS Access Accept messages
- received since system startup."
- ::= { oriRADIUSAuthServerTableEntry 11 }
-
- oriRADIUSAuthClientAccessChallenges OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of RADIUS Access Challenges
- messages received since system startup."
- ::= { oriRADIUSAuthServerTableEntry 12 }
-
- oriRADIUSAuthClientAccessRejects OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of RADIUS Access Rejects
- messages received since system startup."
- ::= { oriRADIUSAuthServerTableEntry 13 }
-
- oriRADIUSAuthClientMalformedAccessResponses OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of malformed RADIUS Access
- Response messages received since system startup."
- ::= { oriRADIUSAuthServerTableEntry 14 }
-
- oriRADIUSAuthClientAuthInvalidAuthenticators OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of malformed RADIUS Access
- Response messages containing invalid authenticators received since
- system startup."
- ::= { oriRADIUSAuthServerTableEntry 15 }
-
- oriRADIUSAuthClientTimeouts OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the total number of timeouts for RADIUS
- Access Request messages since system startup."
- ::= { oriRADIUSAuthServerTableEntry 16 }
-
- oriRADIUSAuthServerNameOrIPAddress OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to specify the RADIUS Server host name or
- IP Address."
- ::= { oriRADIUSAuthServerTableEntry 17 }
-
- oriRADIUSAuthServerAddressingFormat OBJECT-TYPE
- SYNTAX INTEGER
- {
- ipAddress(1),
- name(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to specify the addressing format for configuring
- the RADIUS Server. If this object is configured to IP Address, then
- IP address should be used to specify the server. If this object is
- configured to name, then the host name should be specified."
- DEFVAL { ipAddress }
- ::= { oriRADIUSAuthServerTableEntry 18 }
-
- --=============================================================================
- -- The RADIUS Accounting Group: orinocoRADIUSAcct
- --=============================================================================
-
- oriRADIUSAcctStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS deprecated
- DESCRIPTION
- "This object is used to enable or disable the RADIUS Accounting
- service. This object has been deprecated."
- DEFVAL { disable }
- ::= { orinocoRADIUSAcct 1 }
-
- oriRADIUSAcctInactivityTimer OBJECT-TYPE
- SYNTAX Integer32 (1..60)
- MAX-ACCESS read-write
- STATUS deprecated
- DESCRIPTION
- "This parameter represents the inactivity or idle timeout in
- minutes after which an Accounting Stop request is sent to the
- RADIUS Accounting server - the default value is 5 minutes.
- This object has been deprecated."
- DEFVAL { 5 }
- ::= { orinocoRADIUSAcct 2 }
-
- oriRADIUSAcctServerTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriRADIUSAcctServerTableEntry
- MAX-ACCESS not-accessible
- STATUS deprecated
- DESCRIPTION
- "This table represents the RADIUS servers that the device will
- communicated with for accounting. Usually this table should
- have two members representing the primary and secondary (backup)
- RADIUS Accounting Servers. This object has been deprecated."
- ::= { orinocoRADIUSAcct 3 }
-
- oriRADIUSAcctServerTableEntry OBJECT-TYPE
- SYNTAX OriRADIUSAcctServerTableEntry
- MAX-ACCESS not-accessible
- STATUS deprecated
- DESCRIPTION
- "This object represents an entry into the RADIUS Accouting
- Server Table. This object has been deprecated."
- INDEX { oriRADIUSAcctServerTableIndex }
- ::= { oriRADIUSAcctServerTable 1 }
-
- OriRADIUSAcctServerTableEntry ::=
- SEQUENCE
- {
- oriRADIUSAcctServerTableIndex Integer32,
- oriRADIUSAcctServerType INTEGER,
- oriRADIUSAcctServerTableEntryStatus INTEGER,
- oriRADIUSAcctServerIPAddress IpAddress,
- oriRADIUSAcctServerDestPort Integer32,
- oriRADIUSAcctServerSharedSecret DisplayString,
- oriRADIUSAcctServerResponseTime Integer32,
- oriRADIUSAcctServerMaximumRetransmission Integer32,
- oriRADIUSAcctClientAccountingRequests Counter32,
- oriRADIUSAcctClientAccountingRetransmissions Counter32,
- oriRADIUSAcctClientAccountingResponses Counter32,
- oriRADIUSAcctClientAcctInvalidAuthenticators Counter32,
- oriRADIUSAcctServerNameOrIPAddress DisplayString,
- oriRADIUSAcctServerAddressingFormat INTEGER
- }
-
- oriRADIUSAcctServerTableIndex OBJECT-TYPE
- SYNTAX Integer32 (0..2)
- MAX-ACCESS read-only
- STATUS deprecated
- DESCRIPTION
- "This object is used as the index to the RADIUS Server Accounting
- table. This object has been deprecated."
- ::= { oriRADIUSAcctServerTableEntry 1 }
-
- oriRADIUSAcctServerType OBJECT-TYPE
- SYNTAX INTEGER
- {
- authentication(1),
- accounting(2),
- authAndAcct(3)
- }
- MAX-ACCESS read-only
- STATUS deprecated
- DESCRIPTION
- "This object indicates if the RADIUS server will provide
- Authentication service, Accounting service, or both.
- This object has been deprecated."
- ::= { oriRADIUSAcctServerTableEntry 2 }
-
- oriRADIUSAcctServerTableEntryStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS deprecated
- DESCRIPTION
- "This object identifies if the RADIUS server entry is enabled or
- disabled. This object has been deprecated."
- ::= { oriRADIUSAcctServerTableEntry 3 }
-
- oriRADIUSAcctServerIPAddress OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-write
- STATUS deprecated
- DESCRIPTION
- "This object represents the IP address of the RADIUS server.
- This object has been deprecated."
- ::= { oriRADIUSAcctServerTableEntry 4 }
-
- oriRADIUSAcctServerDestPort OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-write
- STATUS deprecated
- DESCRIPTION
- "This object represents the RADIUS server accounting port -
- the default value is 1813. This object has been deprecated."
- DEFVAL { 1813 }
- ::= { oriRADIUSAcctServerTableEntry 5 }
-
- oriRADIUSAcctServerSharedSecret OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS deprecated
- DESCRIPTION
- "This object represents the shared secret between the RADIUS
- server and client. This object should be treated as write-only
- and returned as asterisks. This object has been deprecated."
- ::= { oriRADIUSAcctServerTableEntry 6 }
-
- oriRADIUSAcctServerResponseTime OBJECT-TYPE
- SYNTAX Integer32 (1..10)
- MAX-ACCESS read-write
- STATUS deprecated
- DESCRIPTION
- "This object represents the time (in seconds) for which the
- RADIUS client will wait, until another accounting request is
- sent to the server. This object has been deprecated."
- DEFVAL { 3 }
- ::= { oriRADIUSAcctServerTableEntry 7 }
-
- oriRADIUSAcctServerMaximumRetransmission OBJECT-TYPE
- SYNTAX Integer32 (0..4)
- MAX-ACCESS read-write
- STATUS deprecated
- DESCRIPTION
- "This object represents the number of retransmissions of
- accounting requests by the RADIUS Client to the Server.
- This object has been deprecated."
- DEFVAL { 3 }
- ::= { oriRADIUSAcctServerTableEntry 8 }
-
- oriRADIUSAcctClientAccountingRequests OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS deprecated
- DESCRIPTION
- "This object represents the number of Accounting Requests messages
- sent since system startup. This object has been deprecated."
- ::= { oriRADIUSAcctServerTableEntry 9 }
-
- oriRADIUSAcctClientAccountingRetransmissions OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS deprecated
- DESCRIPTION
- "This object represents the number of Accounting Requests
- messages retransmitted sent since system startup.
- This object has been deprecated."
- ::= { oriRADIUSAcctServerTableEntry 10 }
-
- oriRADIUSAcctClientAccountingResponses OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS deprecated
- DESCRIPTION
- "This object represents the number of Accounting Response messages
- received since system startup. This object has been deprecated."
- ::= { oriRADIUSAcctServerTableEntry 11 }
-
- oriRADIUSAcctClientAcctInvalidAuthenticators OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS deprecated
- DESCRIPTION
- "This object represents the number of Accounting Response
- messages which contain invalid authenticators received since system
- startup. This object has been deprecated."
- ::= { oriRADIUSAcctServerTableEntry 12 }
-
- oriRADIUSAcctServerNameOrIPAddress OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS deprecated
- DESCRIPTION
- "This object is used to specify the RADIUS Server host name or the
- IP Address. This object has been deprecated."
- ::= { oriRADIUSAcctServerTableEntry 13 }
-
- oriRADIUSAcctServerAddressingFormat OBJECT-TYPE
- SYNTAX INTEGER
- {
- ipAddress(1),
- name(2)
- }
- MAX-ACCESS read-write
- STATUS deprecated
- DESCRIPTION
- "This object is used to specify the addressing format for configuring
- the RADIUS Server. If this object is configured to IP Address, then
- IP address should be used to specify the server. If this object is
- configured to name, then the host name should be specified.
- This object has been deprecated."
- DEFVAL { ipAddress }
- ::= { oriRADIUSAcctServerTableEntry 14 }
-
- oriRADIUSAcctUpdateInterval OBJECT-TYPE
- SYNTAX Integer32 (0..3600)
- MAX-ACCESS read-write
- STATUS deprecated
- DESCRIPTION
- "This object is used to specify the interval in seconds at which
- RADIUS accounting update messages will be sent.
- This object has been deprecated."
- ::= { orinocoRADIUSAcct 4 }
-
- --=============================================================================
- -- The RADIUS Server Profile Table
- --=============================================================================
-
- oriRADIUSSvrTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriRADIUSSvrTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table represents the RADIUS server profile that the device will
- communicated with for client authentication and/or accounting. This
- table has two indices - the first index indicates the profile number
- and the second index indicates primary and secondary/backup servers."
- ::= { orinocoRADIUSSvrProfiles 1 }
-
- oriRADIUSSvrTableEntry OBJECT-TYPE
- SYNTAX OriRADIUSSvrTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents an entry in the RADIUS Server Table."
- INDEX { oriRADIUSSvrTableProfileIndex,
- oriRADIUSSvrTablePrimaryOrSecondaryIndex }
- ::= { oriRADIUSSvrTable 1 }
-
- OriRADIUSSvrTableEntry ::=
- SEQUENCE
- {
- oriRADIUSSvrTableProfileIndex Integer32,
- oriRADIUSSvrTablePrimaryOrSecondaryIndex Integer32,
- oriRADIUSSvrTableProfileName DisplayString,
- oriRADIUSSvrTableAddressingFormat INTEGER,
- oriRADIUSSvrTableNameOrIPAddress DisplayString,
- oriRADIUSSvrTableDestPort Integer32,
- oriRADIUSSvrTableSharedSecret DisplayString,
- oriRADIUSSvrTableResponseTime Integer32,
- oriRADIUSSvrTableMaximumRetransmission Integer32,
- oriRADIUSSvrTableVLANID VlanId,
- oriRADIUSSvrTableMACAddressFormat INTEGER,
- oriRADIUSSvrTableAuthorizationLifeTime Integer32,
- oriRADIUSSvrTableAccountingInactivityTimer Integer32,
- oriRADIUSSvrTableAccountingUpdateInterval Integer32,
- oriRADIUSSvrTableRowStatus RowStatus
- }
-
- oriRADIUSSvrTableProfileIndex OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the RADIUS Server profile index."
- ::= { oriRADIUSSvrTableEntry 1 }
-
- oriRADIUSSvrTablePrimaryOrSecondaryIndex OBJECT-TYPE
- SYNTAX Integer32 (1..2)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is a second index to the RADIUS Server table, which
- identifies a server bein primary or secondary/backup."
- ::= { oriRADIUSSvrTableEntry 2 }
-
- oriRADIUSSvrTableProfileName OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object is used to specify a unique name for the RADIUS server
- profile."
- ::= { oriRADIUSSvrTableEntry 3 }
-
- oriRADIUSSvrTableAddressingFormat OBJECT-TYPE
- SYNTAX INTEGER
- {
- ipAddress(1),
- name(2)
- }
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object is used to specify the addressing format for configuring
- the RADIUS Server. If this object is configured to IP Address, then
- IP address should be used to specify the server. If this object is
- configured to name, then the host name should be specified."
- DEFVAL { ipAddress }
- ::= { oriRADIUSSvrTableEntry 4 }
-
- oriRADIUSSvrTableNameOrIPAddress OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object is used to specify the RADIUS Server host name or
- IP Address."
- ::= { oriRADIUSSvrTableEntry 5 }
-
- oriRADIUSSvrTableDestPort OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object represents the RADIUS server authentication port -
- the default value is 1812."
- DEFVAL { 1812 }
- ::= { oriRADIUSSvrTableEntry 6 }
-
- oriRADIUSSvrTableSharedSecret OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object represents the shared secret between the RADIUS
- server and client. This object should be treated as write-only
- and returned as asterisks."
- ::= { oriRADIUSSvrTableEntry 7 }
-
- oriRADIUSSvrTableResponseTime OBJECT-TYPE
- SYNTAX Integer32 (1..10)
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object represents the time (in seconds) for which the
- RADIUS client will wait, until another authentication request is
- sent to the server."
- DEFVAL { 3 }
- ::= { oriRADIUSSvrTableEntry 8 }
-
- oriRADIUSSvrTableMaximumRetransmission OBJECT-TYPE
- SYNTAX Integer32 (0..4)
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object represents the number of retransmissions of
- authentication requests by the RADIUS Client to the Server."
- DEFVAL { 3 }
- ::= { oriRADIUSSvrTableEntry 9 }
-
- oriRADIUSSvrTableVLANID OBJECT-TYPE
- SYNTAX VlanId
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object represents the VLAND ID that will be used to tag
- RADIUS messages from the client to the server."
- ::= { oriRADIUSSvrTableEntry 10 }
-
- oriRADIUSSvrTableMACAddressFormat OBJECT-TYPE
- SYNTAX INTEGER
- {
- dashDelimited(1),
- colonDelimited(2),
- singleDashDelimited(3),
- noDelimiter(4)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to configure the MAC Address format that is to be
- used for communication with the RADIUS Server.
- Examples of MAC Address Format are:
- - Dash Delimited: 00-11-22-AA-BB-CC
- - Colon Delimited: 00:11:22:AA:BB:CC
- - Single Dash Delimited: 001122-AABBCC
- - No Delimiter: 001122AABBCC"
- DEFVAL { dashDelimited }
- ::= { oriRADIUSSvrTableEntry 11 }
-
- oriRADIUSSvrTableAuthorizationLifeTime OBJECT-TYPE
- SYNTAX Integer32 (0|900..43200)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the authorization lifetime for a certain
- MAC based RADIUS authenticated client. A value of zero (0) means that
- re-authorization is disabled. The units for this object is seconds."
- DEFVAL { 0 }
- ::= { oriRADIUSSvrTableEntry 12 }
-
- oriRADIUSSvrTableAccountingInactivityTimer OBJECT-TYPE
- SYNTAX Integer32 (1..60)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This parameter represents the client idle timeout in
- minutes. Once this timer has expired an Accounting Stop request
- is sent to the RADIUS Accounting Server."
- DEFVAL { 5 }
- ::= { oriRADIUSSvrTableEntry 13 }
-
- oriRADIUSSvrTableAccountingUpdateInterval OBJECT-TYPE
- SYNTAX Integer32 (0|10..10080)
- UNITS "minutes"
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to specify the interval in seconds at which
- RADIUS accounting update messages will be sent. This object is defined
- in minutes; a value of zero (0) disables the accouting updates."
- ::= { oriRADIUSSvrTableEntry 14 }
-
- oriRADIUSSvrTableRowStatus OBJECT-TYPE
- SYNTAX RowStatus
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object represents the status of the RADIUS Server profile."
- ::= { oriRADIUSSvrTableEntry 15 }
-
- --=============================================================================
- -- The RADIUS Authentication Client Statistics Table
- --=============================================================================
-
- oriRADIUSClientInvalidSvrAddress OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This counter represents the total number of RADIUS access-response
- messages received from an unknown address since system startup."
- ::= { orinocoRADIUSSvrProfiles 2 }
-
- oriRADIUSAuthClientStatTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriRADIUSAuthClientStatTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table is used to store RADIUS Authentication Client Statistics
- for the configured profiles."
- ::= { orinocoRADIUSSvrProfiles 3 }
-
- oriRADIUSAuthClientStatTableEntry OBJECT-TYPE
- SYNTAX OriRADIUSAuthClientStatTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents an entry, primary and secondary/backup,
- in the RADIUS Authentication Client Statistics table."
- INDEX { oriRADIUSAuthClientStatTableIndex,
- oriRADIUSAuthClientStatTablePrimaryOrSecondaryIndex }
- ::= { oriRADIUSAuthClientStatTable 1 }
-
- OriRADIUSAuthClientStatTableEntry ::=
- SEQUENCE
- {
- oriRADIUSAuthClientStatTableIndex Integer32,
- oriRADIUSAuthClientStatTablePrimaryOrSecondaryIndex Integer32,
- oriRADIUSAuthClientStatTableAccessRequests Counter32,
- oriRADIUSAuthClientStatTableAccessRetransmissions Counter32,
- oriRADIUSAuthClientStatTableAccessAccepts Counter32,
- oriRADIUSAuthClientStatTableAccessRejects Counter32,
- oriRADIUSAuthClientStatTableAccessChallenges Counter32,
- oriRADIUSAuthClientStatTableMalformedAccessResponses Counter32,
- oriRADIUSAuthClientStatTableBadAuthenticators Counter32,
- oriRADIUSAuthClientStatTableTimeouts Counter32
- }
-
- oriRADIUSAuthClientStatTableIndex OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used as an index to the RADIUS Authentication Client
- Statistics Table."
- ::= { oriRADIUSAuthClientStatTableEntry 1 }
-
- oriRADIUSAuthClientStatTablePrimaryOrSecondaryIndex OBJECT-TYPE
- SYNTAX Integer32 (1..2)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used as an secondary index to the RADIUS
- Authentication Client Statistics Table, which is used to indicate
- primary and secondary/backup server statistics."
- ::= { oriRADIUSAuthClientStatTableEntry 2 }
-
- oriRADIUSAuthClientStatTableAccessRequests OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of RADIUS Access Requests
- messages transmitted from the client to the server since client
- startup."
- ::= { oriRADIUSAuthClientStatTableEntry 3 }
-
- oriRADIUSAuthClientStatTableAccessRetransmissions OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of RADIUS Access Requests
- retransmitted by the client to the server since system startup."
- ::= { oriRADIUSAuthClientStatTableEntry 4 }
-
- oriRADIUSAuthClientStatTableAccessAccepts OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object indicates the number of RADIUS Access Accept messages
- received since system startup."
- ::= { oriRADIUSAuthClientStatTableEntry 5 }
-
- oriRADIUSAuthClientStatTableAccessChallenges OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of RADIUS Access Challenges
- messages received since system startup."
- ::= { oriRADIUSAuthClientStatTableEntry 6 }
-
- oriRADIUSAuthClientStatTableAccessRejects OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of RADIUS Access Rejects
- messages received since system startup."
- ::= { oriRADIUSAuthClientStatTableEntry 7 }
-
- oriRADIUSAuthClientStatTableMalformedAccessResponses OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of malformed RADIUS Access
- Response messages received since system startup."
- ::= { oriRADIUSAuthClientStatTableEntry 8 }
-
- oriRADIUSAuthClientStatTableBadAuthenticators OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of malformed RADIUS Access
- Response messages containing invalid authenticators received since
- system startup."
- ::= { oriRADIUSAuthClientStatTableEntry 9 }
-
- oriRADIUSAuthClientStatTableTimeouts OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the total number of timeouts for RADIUS
- Access Request messages since system startup."
- ::= { oriRADIUSAuthClientStatTableEntry 10 }
-
- --=============================================================================
- -- The RADIUS Accounting Client Statistics Table
- --=============================================================================
-
- oriRADIUSAcctClientStatTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriRADIUSAcctClientStatTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table is used to store RADIUS Accounting Client Statistics
- for the configured profiles."
- ::= { orinocoRADIUSSvrProfiles 4 }
-
- oriRADIUSAcctClientStatTableEntry OBJECT-TYPE
- SYNTAX OriRADIUSAcctClientStatTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents an entry, primary and secondary/backup,
- in the RADIUS Accounting Client Statistics table."
- INDEX { oriRADIUSAcctClientStatTableIndex,
- oriRADIUSAcctClientStatTablePrimaryOrSecondaryIndex }
- ::= { oriRADIUSAcctClientStatTable 1 }
-
- OriRADIUSAcctClientStatTableEntry ::=
- SEQUENCE
- {
- oriRADIUSAcctClientStatTableIndex Integer32,
- oriRADIUSAcctClientStatTablePrimaryOrSecondaryIndex Integer32,
- oriRADIUSAcctClientStatTableAccountingRequests Counter32,
- oriRADIUSAcctClientStatTableAccountingRetransmissions Counter32,
- oriRADIUSAcctClientStatTableAccountingResponses Counter32,
- oriRADIUSAcctClientStatTableBadAuthenticators Counter32
- }
-
- oriRADIUSAcctClientStatTableIndex OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used as an index to the RADIUS Accounting Client
- Statistics Table."
- ::= { oriRADIUSAcctClientStatTableEntry 1 }
-
- oriRADIUSAcctClientStatTablePrimaryOrSecondaryIndex OBJECT-TYPE
- SYNTAX Integer32 (1..2)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used as an secondary index to the RADIUS
- Accounting Client Statistics Table, which is used to indicate
- primary and secondary/backup server statistics."
- ::= { oriRADIUSAcctClientStatTableEntry 2 }
-
- oriRADIUSAcctClientStatTableAccountingRequests OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of RADIUS Accounting Requests
- messages transmitted from the client to the server since client
- startup."
- ::= { oriRADIUSAcctClientStatTableEntry 3 }
-
- oriRADIUSAcctClientStatTableAccountingRetransmissions OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of RADIUS Accounting Requests
- retransmitted by the client to the server since system startup."
- ::= { oriRADIUSAcctClientStatTableEntry 4 }
-
- oriRADIUSAcctClientStatTableAccountingResponses OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object indicates the number of RADIUS Accounting Response
- messages received since system startup."
- ::= { oriRADIUSAcctClientStatTableEntry 5 }
-
- oriRADIUSAcctClientStatTableBadAuthenticators OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of malformed RADIUS Access
- Response messages containing invalid authenticators received since
- system startup."
- ::= { oriRADIUSAcctClientStatTableEntry 6 }
-
- --=============================================================================
- -- The Telnet Group: orinocoTelnet
- --=============================================================================
-
- oriTelnetSessions OBJECT-TYPE
- SYNTAX Integer32 (0..5)
- MAX-ACCESS read-write
- STATUS deprecated
- DESCRIPTION
- "This object is used to enable or disable telnet access and
- to specify the maximum number of active telnet sessions. When this
- object is set to 0, telnet access is disabled. When this object
- is set to something greater than 0, then it specifies the maximum
- number of active telnet sessions. This object has been deprecated."
- DEFVAL { 1 }
- ::= { orinocoTelnet 1 }
-
- oriTelnetPassword OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is the password to access the device via the telnet
- interface. This object should be treated as write-only and
- returned as asterisks."
- DEFVAL { "public" }
- ::= { orinocoTelnet 2 }
-
- oriTelnetPort OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the TCP/IP port for which the telnet
- daemon/server will be accessible."
- DEFVAL { 23 }
- ::= { orinocoTelnet 3 }
-
- oriTelnetLoginTimeout OBJECT-TYPE
- SYNTAX Integer32 (30..300)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the telnet login timeout in seconds."
- DEFVAL { 60 }
- ::= { orinocoTelnet 4 }
-
- oriTelnetIdleTimeout OBJECT-TYPE
- SYNTAX Integer32 (60..36000)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the telnet inactivity/idle timeout in
- seconds."
- DEFVAL { 900 }
- ::= { orinocoTelnet 5 }
-
- oriTelnetInterfaceBitmask OBJECT-TYPE
- SYNTAX InterfaceBitmask
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to control interface access for telnet based
- management."
- ::= { orinocoTelnet 6 }
-
- oriTelnetSSHStatus OBJECT-TYPE
- SYNTAX ObjStatus
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable CLI access configuration
- using secure shell."
- DEFVAL { disable }
- ::= { orinocoTelnet 7 }
-
- oriTelnetSSHHostKeyStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- create(1),
- delete(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used create or delete the SSH Public Host key of the
- device."
- ::= { orinocoTelnet 8 }
-
- oriTelnetSSHFingerPrint OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object gives the fingerprint of the SSH Public Host key stored
- on the device."
- ::= { orinocoTelnet 9 }
-
- oriTelnetRADIUSAccessControl OBJECT-TYPE
- SYNTAX ObjStatus
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable/disable RADIUS Based Authentication for
- telnet based management."
- DEFVAL { disable }
- ::= { orinocoTelnet 10 }
-
- --=============================================================================
- -- The TFTP Group: orinocoTFTP
- --=============================================================================
-
- oriTFTPServerIPAddress OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the IP address of the TFTP server."
- DEFVAL { '0a000002'H }
- ::= { orinocoTFTP 1 }
-
- oriTFTPFileName OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the filename to upload or download to the
- TFTP server."
- DEFVAL { "Filename" }
- ::= { orinocoTFTP 2 }
-
- oriTFTPFileType OBJECT-TYPE
- SYNTAX INTEGER
- {
- config(1),
- image(2),
- bootloader(3),
- license(4),
- certificate(5),
- privatekey(6),
- sshHostPublicKey(7),
- sshHostPrivateKey(8),
- cliBatchFile(9),
- cliBatchLog(10),
- templog(11),
- eventlog(12)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used for the device to know what type of file is
- being uploaded or downloaded."
- ::= { orinocoTFTP 3 }
-
- oriTFTPOperation OBJECT-TYPE
- SYNTAX INTEGER
- {
- upload(1),
- download(2),
- downloadAndReboot(3)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the TFTP operation to be executed. The
- upload function shall transfer the specified file from the
- device to the TFTP server. The download function shall transfer
- the specified file from the TFTP server to the device. The
- download and reboot option, will perform the download and then
- reboot the device."
- ::= { orinocoTFTP 4 }
-
- oriTFTPFileMode OBJECT-TYPE
- SYNTAX INTEGER
- {
- ascii(1),
- bin(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This objects represents the file transfer mode for the TFTP
- protocol."
- ::= { orinocoTFTP 5 }
-
- oriTFTPOperationStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- idle(1),
- inProgress(2),
- successful(3),
- failure(4)
- }
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the TFTP operation status. When a TFTP
- operation is idle (not in progress) this object will be set to 1.
- When a TFTP operation is in progress this object will be set to 2.
- When a TFTP operation has been successful this object will be set
- to 3. When a TFTP operation has failed this object will be set
- to 4."
- ::= { orinocoTFTP 6 }
-
- oriTFTPAutoConfigStatus OBJECT-TYPE
- SYNTAX ObjStatus
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This objects is used to enable/disable the Auto Configuration feature.
- This feature allows for a configuration file to be downloaded from
- a TFTP server so the AP can be configured via a config file."
- ::= { orinocoTFTP 7 }
-
- oriTFTPAutoConfigFilename OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to configure the name of the configuration file
- to be downloaded using the Auto Configuration feature. This filename
- can be configured directly via the end user or can be retrieved in the
- DHCP response message when the AP is configured for dynamic IP address
- assignment type."
- ::= { orinocoTFTP 8 }
-
- oriTFTPAutoConfigServerIPAddress OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to configure the TFTP server IP Address. This
- object can be configured directly via the end user or can be retrieved
- in the DHCP response message when the AP is configured for dynamic IP
- address assignment type."
- ::= { orinocoTFTP 9 }
-
- oriTFTPDowngrade OBJECT-TYPE
- SYNTAX INTEGER
- {
- none(1),
- rel201(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "On selection of this option, the software will downgrade the
- configuration file to the specified release from the current
- release"
- DEFVAL { none }
- ::= { orinocoTFTP 10 }
-
- --=============================================================================
- -- The Serial Group: orinocoSerial
- --=============================================================================
-
- oriSerialBaudRate OBJECT-TYPE
- SYNTAX INTEGER
- {
- baud2400(1),
- baud4800(2),
- baud9600(3),
- baud19200(4),
- baud38400(5),
- baud57600(6)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the baud rate for the serial interface -
- the default value is 9600."
- DEFVAL { baud9600 }
- ::= { orinocoSerial 1 }
-
- oriSerialDataBits OBJECT-TYPE
- SYNTAX Integer32 (4..8)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the serial interface data bits - the
- default value is 8."
- DEFVAL { 8 }
- ::= { orinocoSerial 2 }
-
- oriSerialParity OBJECT-TYPE
- SYNTAX INTEGER
- {
- even(1),
- odd(2),
- none(3),
- mark(4),
- space(5)
- }
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used for the serial interface parity check - the
- default value is none."
- DEFVAL { none }
- ::= { orinocoSerial 3 }
-
- oriSerialStopBits OBJECT-TYPE
- SYNTAX INTEGER
- {
- bit1(1),
- bit1dot5(2),
- bit2(3)
- }
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object indicates the serial interface stop bits - the
- default value is 1."
- DEFVAL { bit1 }
- ::= { orinocoSerial 4 }
-
- oriSerialFlowControl OBJECT-TYPE
- SYNTAX INTEGER
- {
- xonxoff(1),
- none(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used for the serial interface flow control - the
- default value is none."
- DEFVAL { none }
- ::= { orinocoSerial 5 }
-
- --=============================================================================
- -- The IAPP Group: orinocoIAPP
- --=============================================================================
-
- oriIAPPStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable the IAPP feature."
- DEFVAL { enable }
- ::= { orinocoIAPP 1 }
-
- oriIAPPPeriodicAnnounceInterval OBJECT-TYPE
- SYNTAX INTEGER
- {
- eighty(80),
- oneHundredTwenty(120),
- oneHundredSixty(160),
- twoHundred(200)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents interval in seconds for performing an
- IAPP announce operation by the device."
- DEFVAL { oneHundredTwenty }
- ::= { orinocoIAPP 2 }
-
- oriIAPPAnnounceResponseTime OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object indicates the amount of time in seconds the
- device waits to send an IAPP announce response after an announce
- request message is sent."
- ::= { orinocoIAPP 3 }
-
- oriIAPPHandoverTimeout OBJECT-TYPE
- SYNTAX INTEGER
- {
- fourHundredTen(410),
- fiveHundredTwelve(512),
- sixHundredFourteen(614),
- sevenHundredSeventeen(717),
- eightHundredNineteen(819)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the time in milliseconds the device
- waits before it resends a handover response message. This
- object is originally given in kuseconds, but has been converted
- to milliseconds."
- DEFVAL { fiveHundredTwelve }
- ::= { orinocoIAPP 4 }
-
- oriIAPPMaximumHandoverRetransmissions OBJECT-TYPE
- SYNTAX Integer32 (1..4)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object indicates the maximum amount of retransmission sent
- by the device for a handover request message."
- DEFVAL { 4 }
- ::= { orinocoIAPP 5 }
-
- oriIAPPAnnounceRequestSent OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the total number of IAPP Announce
- Request Messages sent since system startup."
- ::= { orinocoIAPP 6 }
-
- oriIAPPAnnounceRequestReceived OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the total number of IAPP Announce
- Request Messages received since system startup."
- ::= { orinocoIAPP 7 }
-
- oriIAPPAnnounceResponseSent OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the total number of IAPP Announce
- Response Messages sent since system startup."
- ::= { orinocoIAPP 8 }
-
- oriIAPPAnnounceResponseReceived OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the total number of IAPP Announce
- Response Messages received since system startup."
- ::= { orinocoIAPP 9 }
-
- oriIAPPHandoverRequestSent OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the total number of IAPP Handover
- Request messages sent since system startup."
- ::= { orinocoIAPP 10 }
-
- oriIAPPHandoverRequestReceived OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the total number of IAPP Handover
- Request messages received since system startup."
- ::= { orinocoIAPP 11 }
-
- oriIAPPHandoverRequestRetransmissions OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the total number of IAPP Handover
- Request retransmissions since system startup."
- ::= { orinocoIAPP 12 }
-
- oriIAPPHandoverResponseSent OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the total number of IAPP Handover
- Response messages sent since system startup."
- ::= { orinocoIAPP 13 }
-
- oriIAPPHandoverResponseReceived OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the total number of IAPP Handover
- Response messages received since system startup."
- ::= { orinocoIAPP 14 }
-
- oriIAPPPDUsDropped OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the total number of IAPP packets dropped
- due to erroneous information within the packet since system
- startup."
- ::= { orinocoIAPP 15 }
-
- oriIAPPRoamingClients OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the total number of client that have
- roamed from one device to another. This parameter is per device
- and not a total counter of all the roaming clients for all devices
- on the network."
- ::= { orinocoIAPP 16 }
-
- oriIAPPMACIPTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriIAPPMACIPTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table contains a list of devices on the network that support
- IAPP and have the feature enabled."
- ::= { orinocoIAPP 21 }
-
- oriIAPPMACIPTableEntry OBJECT-TYPE
- SYNTAX OriIAPPMACIPTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents an entry in the IAPP table, which
- essentially is a device that supports IAPP and has the feature
- enabled."
- INDEX { oriIAPPMACIPTableIndex }
- ::= { oriIAPPMACIPTable 1 }
-
- OriIAPPMACIPTableEntry ::=
- SEQUENCE
- {
- oriIAPPMACIPTableIndex Integer32,
- oriIAPPMACIPTableSystemName DisplayString,
- oriIAPPMACIPTableIPAddress IpAddress,
- oriIAPPMACIPTableBSSID PhysAddress,
- oriIAPPMACIPTableESSID DisplayString
- }
-
- oriIAPPMACIPTableIndex OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used as the index for the IAPP MAC-IP table."
- ::= { oriIAPPMACIPTableEntry 1 }
-
- oriIAPPMACIPTableSystemName OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the System Name of the IAPP enabled
- device."
- ::= { oriIAPPMACIPTableEntry 2 }
-
- oriIAPPMACIPTableIPAddress OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the IP Address of the IAPP enabled device."
- ::= { oriIAPPMACIPTableEntry 3 }
-
- oriIAPPMACIPTableBSSID OBJECT-TYPE
- SYNTAX PhysAddress
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the BSSID (MAC address of wireless
- interface) of the IAPP enabled device."
- ::= { oriIAPPMACIPTableEntry 4 }
-
- oriIAPPMACIPTableESSID OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the ESSID (network name) of the IAPP
- enabled device."
- ::= { oriIAPPMACIPTableEntry 5 }
-
- oriIAPPSendAnnounceRequestOnStart OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to determine whether to send announce request
- on start."
- DEFVAL { enable }
- ::= { orinocoIAPP 22 }
-
- --=============================================================================
- -- The Link Test Group: orinocoLinkTest
- --=============================================================================
-
- oriLinkTestTimeOut OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "The value of this object determines the time (in seconds) that a
- link test will continue without any SNMP requests for a Link Test
- Table entry. When the time expires the Link Test Table is
- cleared."
- DEFVAL { 300 }
- ::= { orinocoLinkTest 1 }
-
- oriLinkTestInterval OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object indicates the interval (in milliseconds) between
- sending link test frames to a station."
- DEFVAL { 200 }
- ::= { orinocoLinkTest 3 }
-
- oriLinkTestExplore OBJECT-TYPE
- SYNTAX INTEGER
- {
- tableTimedOut(1),
- exploring(2),
- exploreResultsAvailable(3)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "When this object is set to 2, the device will send out an explore
- request on all 802.11 interfaces and from the results build the
- Link Test table. This table is valid only while this object is
- set to 3."
- ::= { orinocoLinkTest 4 }
-
- oriLinkTestTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriLinkTestTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table contains the information for the stations currently
- associated with the access point."
- ::= { orinocoLinkTest 5 }
-
- oriLinkTestTableEntry OBJECT-TYPE
- SYNTAX OriLinkTestTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents the entry in the Remote Link Test table."
- INDEX { oriLinkTestTableIndex }
- ::= { oriLinkTestTable 1 }
-
- OriLinkTestTableEntry ::=
- SEQUENCE
- {
- oriLinkTestTableIndex Integer32,
- oriLinkTestInProgress INTEGER,
- oriLinkTestStationName DisplayString,
- oriLinkTestMACAddress PhysAddress,
- oriLinkTestStationProfile Integer32,
- oriLinkTestOurCurSignalLevel Integer32,
- oriLinkTestOurCurNoiseLevel Integer32,
- oriLinkTestOurCurSNR Integer32,
- oriLinkTestOurMinSignalLevel Integer32,
- oriLinkTestOurMinNoiseLevel Integer32,
- oriLinkTestOurMinSNR Integer32,
- oriLinkTestOurMaxSignalLevel Integer32,
- oriLinkTestOurMaxNoiseLevel Integer32,
- oriLinkTestOurMaxSNR Integer32,
- oriLinkTestOurLowFrameCount Integer32,
- oriLinkTestOurStandardFrameCount Integer32,
- oriLinkTestOurMediumFrameCount Integer32,
- oriLinkTestOurHighFrameCount Integer32,
- oriLinkTestHisCurSignalLevel Integer32,
- oriLinkTestHisCurNoiseLevel Integer32,
- oriLinkTestHisCurSNR Integer32,
- oriLinkTestHisMinSignalLevel Integer32,
- oriLinkTestHisMinNoiseLevel Integer32,
- oriLinkTestHisMinSNR Integer32,
- oriLinkTestHisMaxSignalLevel Integer32,
- oriLinkTestHisMaxNoiseLevel Integer32,
- oriLinkTestHisMaxSNR Integer32,
- oriLinkTestHisLowFrameCount Integer32,
- oriLinkTestHisStandardFrameCount Integer32,
- oriLinkTestHisMediumFrameCount Integer32,
- oriLinkTestHisHighFrameCount Integer32,
- oriLinkTestInterface DisplayString,
- oriLinkTestRadioType DisplayString
- }
-
- oriLinkTestTableIndex OBJECT-TYPE
- SYNTAX Integer32 (0..500)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents a unique value for each station. The
- value for each station must remain constant at least from one
- explore to the next."
- ::= { oriLinkTestTableEntry 1 }
-
- oriLinkTestInProgress OBJECT-TYPE
- SYNTAX INTEGER
- {
- noLinkTestInProgress(1),
- linkTestIinProgress(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "When this object is set to 2 the device will initiate a link test
- sequence with this station."
- ::= { oriLinkTestTableEntry 2 }
-
- oriLinkTestStationName OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object identifies the name of the station whom which the
- link test is being performed."
- ::= { oriLinkTestTableEntry 3 }
-
- oriLinkTestMACAddress OBJECT-TYPE
- SYNTAX PhysAddress
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the MAC address that will be mapped to
- the IP Address of the station."
- ::= { oriLinkTestTableEntry 4 }
-
- oriLinkTestStationProfile OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the profile/capabilities for this station."
- ::= { oriLinkTestTableEntry 5 }
-
- oriLinkTestOurCurSignalLevel OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The current signal level (in dB) for the link test from this
- station. This object indicates the running average of the local
- signal level using the algorithm (3/4*oldvalue + 1/4*newvalue)."
- ::= { oriLinkTestTableEntry 6 }
-
- oriLinkTestOurCurNoiseLevel OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The current noise level (in dB) for the link test to this station.
- This object indicates the running average of the local noise
- level."
- ::= { oriLinkTestTableEntry 7 }
-
- oriLinkTestOurCurSNR OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The current signal to noise ratio for the link test to this
- station."
- ::= { oriLinkTestTableEntry 8 }
-
- oriLinkTestOurMinSignalLevel OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The minimum signal level during the link test to this station."
- ::= { oriLinkTestTableEntry 9 }
-
- oriLinkTestOurMinNoiseLevel OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The minimum noise level during the link test to this station."
- ::= { oriLinkTestTableEntry 10 }
-
- oriLinkTestOurMinSNR OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The minimum signal to noise ratio during the link test to this
- station."
- ::= { oriLinkTestTableEntry 11 }
-
- oriLinkTestOurMaxSignalLevel OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The maximum signal level during the link test to this station."
- ::= { oriLinkTestTableEntry 12 }
-
- oriLinkTestOurMaxNoiseLevel OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The maximum noise level during the link test to this station."
- ::= { oriLinkTestTableEntry 13 }
-
- oriLinkTestOurMaxSNR OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The maximum signal to noise ratio during the link test to this
- station."
- ::= { oriLinkTestTableEntry 14 }
-
- oriLinkTestOurLowFrameCount OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The total number of frames sent at 1 Mbit/s speed during the link
- test to this station."
- ::= { oriLinkTestTableEntry 15 }
-
- oriLinkTestOurStandardFrameCount OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The total number of frames sent at 2 Mbit/s speed during the link
- test to this station."
- ::= { oriLinkTestTableEntry 16 }
-
- oriLinkTestOurMediumFrameCount OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The total number of frames sent at 5.5 Mbit/s (for Turbo-8, it is
- 5 Mbit/s) speed during the link test to this station."
- ::= { oriLinkTestTableEntry 17 }
-
- oriLinkTestOurHighFrameCount OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The total number of frames sent at 11 Mbit/s (for Turbo-8, it is
- 8 Mbit/s) speed during the link test to this station."
- ::= { oriLinkTestTableEntry 18 }
-
- oriLinkTestHisCurSignalLevel OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The current signal level for the link test to the remote station
- or access point."
- ::= { oriLinkTestTableEntry 19 }
-
- oriLinkTestHisCurNoiseLevel OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The current noise level for the link test to the remote station
- or access point device."
- ::= { oriLinkTestTableEntry 20 }
-
- oriLinkTestHisCurSNR OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The current signal to noise ratio for the link test to the remote
- station or access point device."
- ::= { oriLinkTestTableEntry 21 }
-
- oriLinkTestHisMinSignalLevel OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The minimum signal level during the link test to the remote station
- or access point device."
- ::= { oriLinkTestTableEntry 22 }
-
- oriLinkTestHisMinNoiseLevel OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The minimum noise level during the link test to the remote station
- or access point device."
- ::= { oriLinkTestTableEntry 23 }
-
- oriLinkTestHisMinSNR OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The minimum signal to noise ratio during the link test to the
- remote station or access point device."
- ::= { oriLinkTestTableEntry 24 }
-
- oriLinkTestHisMaxSignalLevel OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The maximum signal level during the link test to the remote
- station or access point device."
- ::= { oriLinkTestTableEntry 25 }
-
- oriLinkTestHisMaxNoiseLevel OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The maximum noise level during the link test to the remote station
- or access point device."
- ::= { oriLinkTestTableEntry 26 }
-
- oriLinkTestHisMaxSNR OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The maximum signal to noise ratio during the link test to the
- remote station or access point device."
- ::= { oriLinkTestTableEntry 27 }
-
- oriLinkTestHisLowFrameCount OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The total number of frames sent at 1 Mbit/s speed during the link
- test to the remote station or access point device."
- ::= { oriLinkTestTableEntry 28 }
-
- oriLinkTestHisStandardFrameCount OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The total number of frames sent at 2 Mbit/s speed during the link
- test to the remote station or access point device."
- ::= { oriLinkTestTableEntry 29 }
-
- oriLinkTestHisMediumFrameCount OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The total number of frames sent at 5.5 Mbit/s (for Turbo-8, it is
- 5 Mbit/s) speed during the link test to the remote station or
- access point device."
- ::= { oriLinkTestTableEntry 30 }
-
- oriLinkTestHisHighFrameCount OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The total number of frames sent at 11 Mbit/s (for Turbo-8, it is
- 5 Mbit/s) speed during the link test to the remote station or
- access point device."
- ::= { oriLinkTestTableEntry 31 }
-
- oriLinkTestInterface OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the wireless interface number to which the
- Client has sent the Explore Response Message."
- ::= { oriLinkTestTableEntry 32 }
-
- oriLinkTestRadioType OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The Wireless Standard for example IEEE 802.11, 802.11b, 802.11a, or
- 802.11g being used by the remote station."
- ::= { oriLinkTestTableEntry 33 }
-
- oriLinkTestDataRateTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriLinkTestDataRateTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table contains counters for the data rates for the stations
- currently associated to the access point."
- ::= { orinocoLinkTest 6 }
-
- oriLinkTestDataRateTableEntry OBJECT-TYPE
- SYNTAX OriLinkTestDataRateTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents the entry in the Remote Link Test data
- rate counter table."
- INDEX { oriLinkTestTableIndex, oriLinkTestDataRateTableIndex }
- ::= { oriLinkTestDataRateTable 1 }
-
- OriLinkTestDataRateTableEntry ::=
- SEQUENCE
- {
- oriLinkTestDataRateTableIndex Integer32,
- oriLinkTestDataRateTableRemoteCount Counter32,
- oriLinkTestDataRateTableLocalCount Counter32
- }
-
- oriLinkTestDataRateTableIndex OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is the second index to the Link Test Data Rate Counter
- Table. The data rates negotiated by the access point and client
- station will represent an index into this table. The data rates are
- defined in units of 500 Kbps."
- ::= { oriLinkTestDataRateTableEntry 1 }
-
- oriLinkTestDataRateTableRemoteCount OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The total number of frames sent at the data rate value of the index
- during the link test to the remote station or access point device."
- ::= { oriLinkTestDataRateTableEntry 2 }
-
- oriLinkTestDataRateTableLocalCount OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The total number of frames sent at the data rate value of the index
- (oriLinkTestDataRateTableindex) during the link test to the client
- station indenfied by the index (oriLinkTestTableIndex)."
- ::= { oriLinkTestDataRateTableEntry 3 }
-
- --=============================================================================
- -- The Link Integrity Group: orinocoLinkInt
- --=============================================================================
-
- oriLinkIntStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable the link integrity
- functionality."
- ::= { orinocoLinkInt 1 }
-
- oriLinkIntPollInterval OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to set the poll interval (in milliseconds)
- for the link integrity check. The valid values for this objects
- are multiples of 500 milliseconds, a value of zero is not
- supported."
- DEFVAL { 500 }
- ::= { orinocoLinkInt 2 }
-
- oriLinkIntPollRetransmissions OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to set the number of retransmissions for
- the link integrity check."
- ::= { orinocoLinkInt 3 }
-
- oriLinkIntTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriLinkIntTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table contains the target IP addresses in order to perform
- the link integrity check. This table is limited to 5 entries."
- ::= { orinocoLinkInt 4 }
-
- oriLinkIntTableEntry OBJECT-TYPE
- SYNTAX OriLinkIntTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object identifies the entry in the link integrity target
- table."
- INDEX { oriLinkIntTableIndex }
- ::= { oriLinkIntTable 1 }
-
- OriLinkIntTableEntry ::=
- SEQUENCE
- {
- oriLinkIntTableIndex Integer32,
- oriLinkIntTableTargetIPAddress IpAddress,
- oriLinkIntTableComment DisplayString,
- oriLinkIntTableEntryStatus INTEGER
- }
-
- oriLinkIntTableIndex OBJECT-TYPE
- SYNTAX Integer32 (0..5)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used as an index for the link integrity target
- table."
- ::= { oriLinkIntTableEntry 1 }
-
- oriLinkIntTableTargetIPAddress OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the IP address of the target machine for
- the link integrity check."
- ::= { oriLinkIntTableEntry 2 }
-
- oriLinkIntTableComment OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used as an optional comment associated to the
- link integrity table entry."
- ::= { oriLinkIntTableEntry 3 }
-
- oriLinkIntTableEntryStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2),
- delete(3)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable, disable, or delete an
- entry in the link integrity table."
- ::= { oriLinkIntTableEntry 4 }
-
- --=============================================================================
- -- The Uplink Power Saving Devices Group: orinocoUPSD
- --=============================================================================
-
- oriUPSDGPRInterval OBJECT-TYPE
- SYNTAX Integer32 (0..25)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to set the interval of GPR message (in 5ms step),
- 0 = disable GPR."
- DEFVAL { 0 }
- ::= { orinocoUPSD 1 }
-
- oriUPSDMaxActiveSU OBJECT-TYPE
- SYNTAX Integer32 (1..64)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to set the maximum actived SU per AP."
- DEFVAL { 32 }
- ::= { orinocoUPSD 2 }
-
- oriUPSDE911Reserved OBJECT-TYPE
- SYNTAX Integer32 (1..64)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to set the bandwidth allocated for E911calls."
- DEFVAL { 16 }
- ::= { orinocoUPSD 3 }
-
- oriUPSDRoamingReserved OBJECT-TYPE
- SYNTAX Integer32 (1..64)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to set the bandwidth allocated for roaming SU."
- DEFVAL { 16 }
- ::= { orinocoUPSD 4 }
-
- --=============================================================================
- -- The Quality of Service Group: orinocoQoS
- --=============================================================================
-
- oriQoSPolicyTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriQoSPolicyTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table is used to configure Quality of Service policies to be used
- in the Access Point."
- ::= { orinocoQoS 1 }
-
- oriQoSPolicyTableEntry OBJECT-TYPE
- SYNTAX OriQoSPolicyTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents entries in the QoS Policy Table."
- INDEX { oriQoSPolicyTableIndex, oriQoSPolicyTableSecIndex }
- ::= { oriQoSPolicyTable 1 }
-
- OriQoSPolicyTableEntry ::=
- SEQUENCE
- {
- oriQoSPolicyTableIndex Integer32,
- oriQoSPolicyTableSecIndex Integer32,
- oriQoSPolicyName DisplayString32,
- oriQoSPolicyType INTEGER,
- oriQoSPolicyPriorityMapping Integer32,
- oriQoSPolicyMarkingStatus ObjStatus,
- oriQoSPolicyTableRowStatus RowStatus
- }
-
- oriQoSPolicyTableIndex OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used as the primary index to the QoS Policy Table."
- ::= { oriQoSPolicyTableEntry 1 }
-
- oriQoSPolicyTableSecIndex OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used as the secondary index to the QoS Policy Table."
- ::= { oriQoSPolicyTableEntry 2 }
-
- oriQoSPolicyName OBJECT-TYPE
- SYNTAX DisplayString32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to specify a name for the QoS Policy."
- ::= { oriQoSPolicyTableEntry 3 }
-
- oriQoSPolicyType OBJECT-TYPE
- SYNTAX INTEGER
- {
- inboundLayer2(1),
- inboundLayer3(2),
- outboundLayer2(3),
- outboundLayer3(4),
- spectralink(5)
- }
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used to specify the QoS policy type."
- DEFVAL { inboundLayer2 }
- ::= { oriQoSPolicyTableEntry 4 }
-
- oriQoSPolicyPriorityMapping OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to configure the QoS priority mapping. The index
- from either the QoS 802.1D to 802.1p mapping table or the index from
- the 802.1D to IP DSCP mapping table should be specified depending on the
- policy type. For Layer 2 polices, an index from the QoS 802.1D to
- 802.1p mapping table should be specified. For Layer 3 policies, an
- index from the QoS 802.1D to IP DSCP mapping table should be specified.
- If a spectralink policy is configured, then this object is not used."
- ::= { oriQoSPolicyTableEntry 5 }
-
- oriQoSPolicyMarkingStatus OBJECT-TYPE
- SYNTAX ObjStatus
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable QoS markings."
- ::= { oriQoSPolicyTableEntry 6 }
-
- oriQoSPolicyTableRowStatus OBJECT-TYPE
- SYNTAX RowStatus
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "The object is used to configure the QoS Policy Table row status."
- ::= { oriQoSPolicyTableEntry 7 }
-
- oriQoSDot1DToDot1pMappingTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriQoSDot1DToDot1pMappingTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table is used to configure Quality of Service mappings between
- 802.1D and 802.1p priorities."
- ::= { orinocoQoS 2 }
-
- oriQoSDot1DToDot1pMappingTableEntry OBJECT-TYPE
- SYNTAX OriQoSDot1DToDot1pMappingTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents entries in the QoS 802.1D to 802.1p Mapping
- Table."
- INDEX { oriQoSDot1DToDot1pMappingTableIndex, oriQoSDot1dPriority }
- ::= { oriQoSDot1DToDot1pMappingTable 1 }
-
- OriQoSDot1DToDot1pMappingTableEntry ::=
- SEQUENCE
- {
- oriQoSDot1DToDot1pMappingTableIndex Integer32,
- oriQoSDot1dPriority Integer32,
- oriQoSDot1pPriority Integer32,
- oriQoSDot1DToDot1pMappingTableRowStatus RowStatus
- }
-
- oriQoSDot1DToDot1pMappingTableIndex OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used as the primary index to the QoS 802.1D to 802.1p
- mapping table."
- ::= { oriQoSDot1DToDot1pMappingTableEntry 1 }
-
- oriQoSDot1dPriority OBJECT-TYPE
- SYNTAX Integer32 (0..7)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used to specify the 802.1d priority and is used as
- the secondary index to the 802.1D to 802.1p mapping table."
- ::= { oriQoSDot1DToDot1pMappingTableEntry 2 }
-
- oriQoSDot1pPriority OBJECT-TYPE
- SYNTAX Integer32 (0..7)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to specify the 802.1D priority to be mapped to a
- 802.1p priority."
- ::= { oriQoSDot1DToDot1pMappingTableEntry 3 }
-
- oriQoSDot1DToDot1pMappingTableRowStatus OBJECT-TYPE
- SYNTAX RowStatus
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "The object is used to configure the QoS 802.1D to 802.1p mapping table
- row status."
- ::= { oriQoSDot1DToDot1pMappingTableEntry 4 }
-
- oriQoSDot1DToIPDSCPMappingTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriQoSDot1DToIPDSCPMappingTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table is used to configure Quality of Service mappings between
- 802.1D to IP DSCP priorities."
- ::= { orinocoQoS 3 }
-
- oriQoSDot1DToIPDSCPMappingTableEntry OBJECT-TYPE
- SYNTAX OriQoSDot1DToIPDSCPMappingTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents entries in the 802.1D to IP DSCP Mapping
- Table."
- INDEX { oriQoSDot1DToIPDSCPMappingTableIndex,
- oriQoSDot1DToIPDSCPPriority }
- ::= { oriQoSDot1DToIPDSCPMappingTable 1 }
-
- OriQoSDot1DToIPDSCPMappingTableEntry ::=
- SEQUENCE
- {
- oriQoSDot1DToIPDSCPMappingTableIndex Integer32,
- oriQoSDot1DToIPDSCPPriority Integer32,
- oriQoSIPDSCPLowerLimit Integer32,
- oriQoSIPDSCPUpperLimit Integer32,
- oriQoSDot1DToIPDSCPMappingTableRowStatus RowStatus
- }
-
- oriQoSDot1DToIPDSCPMappingTableIndex OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used as the primary index to the 802.1D to IP DSCP
- mapping table."
- ::= { oriQoSDot1DToIPDSCPMappingTableEntry 1 }
-
- oriQoSDot1DToIPDSCPPriority OBJECT-TYPE
- SYNTAX Integer32 (0..7)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used to specify the 802.1D priority and is used as
- the secondary index to the 802.1D to IP DSCP mapping table."
- ::= { oriQoSDot1DToIPDSCPMappingTableEntry 2 }
-
- oriQoSIPDSCPLowerLimit OBJECT-TYPE
- SYNTAX Integer32 (0..62)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to specify IP DSCP lower limit."
- DEFVAL { 0 }
- ::= { oriQoSDot1DToIPDSCPMappingTableEntry 3 }
-
- oriQoSIPDSCPUpperLimit OBJECT-TYPE
- SYNTAX Integer32 (1..63)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to specify IP DSCP upper limit."
- DEFVAL { 1 }
- ::= { oriQoSDot1DToIPDSCPMappingTableEntry 4 }
-
- oriQoSDot1DToIPDSCPMappingTableRowStatus OBJECT-TYPE
- SYNTAX RowStatus
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "The object is used to configure the 802.1D to IP DSCP mapping
- table row status."
- ::= { oriQoSDot1DToIPDSCPMappingTableEntry 5 }
-
- --=============================================================================
- -- The DHCP Group: orinocoDHCP
- --=============================================================================
-
- --=============================================================================
- -- The DHCP Server Subgroup: orinocoDHCPServer
- --=============================================================================
-
- oriDHCPServerStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object indicates if the DHCP server is enabled or disabled
- in the device."
- ::= { orinocoDHCPServer 1 }
-
- oriDHCPServerIPPoolTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriDHCPServerIPPoolTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table contains the pools of IP Addresses that the DHCP server
- will assign to the DHCP clients. This table is limited to
- 20."
- ::= { orinocoDHCPServer 2 }
-
- oriDHCPServerIPPoolTableEntry OBJECT-TYPE
- SYNTAX OriDHCPServerIPPoolTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents entries in the DHCP IP Address Pool Table."
- INDEX { oriDHCPServerIPPoolTableIndex }
- ::= { oriDHCPServerIPPoolTable 1 }
-
- OriDHCPServerIPPoolTableEntry ::=
- SEQUENCE
- {
- oriDHCPServerIPPoolTableIndex Integer32,
- oriDHCPServerIPPoolTableStartIPAddress IpAddress,
- oriDHCPServerIPPoolTableEndIPAddress IpAddress,
- oriDHCPServerIPPoolTableWidth Integer32,
- oriDHCPServerIPPoolTableDefaultLeaseTime Integer32,
- oriDHCPServerIPPoolTableMaximumLeaseTime Integer32,
- oriDHCPServerIPPoolTableComment DisplayString,
- oriDHCPServerIPPoolTableEntryStatus INTEGER
- }
-
- oriDHCPServerIPPoolTableIndex OBJECT-TYPE
- SYNTAX Integer32 (1..20)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used as the index for the IP Address Pool table."
- ::= { oriDHCPServerIPPoolTableEntry 1 }
-
- oriDHCPServerIPPoolTableStartIPAddress OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the start IP address for this DHCP IP
- Address IP Pool Table entry."
- ::= { oriDHCPServerIPPoolTableEntry 2 }
-
- oriDHCPServerIPPoolTableEndIPAddress OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the end IP address for this DHCP IP
- Address IP Pool Table entry."
- ::= { oriDHCPServerIPPoolTableEntry 3 }
-
- oriDHCPServerIPPoolTableWidth OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the width or number of IP Address in the
- DHCP IP Address Pool table entry."
- ::= { oriDHCPServerIPPoolTableEntry 4 }
-
- oriDHCPServerIPPoolTableDefaultLeaseTime OBJECT-TYPE
- SYNTAX Integer32 (3600..86400)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the default lease time, in seconds, for
- the IP address assigned by the DHCP server to the DHCP client."
- ::= { oriDHCPServerIPPoolTableEntry 5 }
-
- oriDHCPServerIPPoolTableMaximumLeaseTime OBJECT-TYPE
- SYNTAX Integer32 (3600..86400)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the maximum lease time in seconds for
- the IP address assigned by the DHCP server to the DHCP client."
- ::= { oriDHCPServerIPPoolTableEntry 6 }
-
- oriDHCPServerIPPoolTableComment OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents an optional comment for this table entry."
- ::= { oriDHCPServerIPPoolTableEntry 7 }
-
- oriDHCPServerIPPoolTableEntryStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2),
- delete(3),
- create(4)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "The object indicates the status of the DHCP IP Address Pool
- Table entry."
- ::= { oriDHCPServerIPPoolTableEntry 8 }
-
- oriDHCPServerDefaultGatewayIPAddress OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the IP Address of the gateway or router
- that the DHCP Server will assign to the DHCP client."
- ::= { orinocoDHCPServer 3 }
-
- oriDHCPServerSubnetMask OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the subnet mask to be provided to
- DHCP clients. This object is the same as the subnet mask for
- the device."
- ::= { orinocoDHCPServer 4 }
-
- oriDHCPServerNumIPPoolTableEntries OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of entries in the DHCP IP
- Address Pool Table."
- ::= { orinocoDHCPServer 5 }
-
- oriDHCPServerPrimaryDNSIPAddress OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the primary DNS Server IP Address to be
- assinged to a DHCP Client."
- ::= { orinocoDHCPServer 6 }
-
- oriDHCPServerSecondaryDNSIPAddress OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the secondary DNS Server IP Address to be
- assinged to a DHCP Client."
- ::= { orinocoDHCPServer 7 }
-
- --=============================================================================
- -- The DHCP Client Subgroup: orinocoDHCPClient
- --=============================================================================
-
- oriDHCPClientID OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the DHCP client ID."
- ::= { orinocoDHCPClient 1 }
-
- oriDHCPClientInterfaceBitmask OBJECT-TYPE
- SYNTAX InterfaceBitmask
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object indicates to which interface a DHCP Request
- in sent when the unit is in routing mode"
- ::= { orinocoDHCPClient 2 }
-
- --=============================================================================
- -- The DHCP Relay Agent Subgroup: orinocoDHCPRelay
- --=============================================================================
-
- oriDHCPRelayStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable and disable the DHCP Relay
- functionality."
- DEFVAL { disable }
- ::= { orinocoDHCPRelay 1 }
-
- oriDHCPRelayDHCPServerTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriDHCPRelayDHCPServerTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table contains a list of DHCP servers to which the
- DHCP Agent will communicate with."
- ::= { orinocoDHCPRelay 2 }
-
- oriDHCPRelayDHCPServerTableEntry OBJECT-TYPE
- SYNTAX OriDHCPRelayDHCPServerTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents and entry in the DHCP Server table."
- INDEX {oriDHCPRelayDHCPServerTableIndex }
- ::= { oriDHCPRelayDHCPServerTable 1 }
-
- OriDHCPRelayDHCPServerTableEntry ::=
- SEQUENCE
- {
- oriDHCPRelayDHCPServerTableIndex Integer32,
- oriDHCPRelayDHCPServerTableIpAddress IpAddress,
- oriDHCPRelayDHCPServerTableComment DisplayString,
- oriDHCPRelayDHCPServerTableEntryStatus INTEGER
- }
-
- oriDHCPRelayDHCPServerTableIndex OBJECT-TYPE
- SYNTAX Integer32 (1..10)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used as the index to this table. This table is
- limited to 10 entries."
- ::= { oriDHCPRelayDHCPServerTableEntry 1 }
-
- oriDHCPRelayDHCPServerTableIpAddress OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the IP address of the DHCP server
- that shall receive DHCP requests from the device."
- ::= { oriDHCPRelayDHCPServerTableEntry 2 }
-
- oriDHCPRelayDHCPServerTableComment OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents an optional comment in order to provide
- additional information or a unique identifier for the DHCP server
- (for example the server system name)."
- ::= { oriDHCPRelayDHCPServerTableEntry 3 }
-
- oriDHCPRelayDHCPServerTableEntryStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2),
- delete(3),
- create(4)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable, disable, delete or create an
- entry in the DHCP Server Table."
- DEFVAL {disable}
- ::= { oriDHCPRelayDHCPServerTableEntry 4 }
-
- --=============================================================================
- -- The HTTP Server Group: orinocoHTTP
- --=============================================================================
-
- oriHTTPInterfaceBitmask OBJECT-TYPE
- SYNTAX InterfaceBitmask
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to control interface access for HTTP based
- management."
- ::= { orinocoHTTP 1 }
-
- oriHTTPPassword OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the login password in order to manage
- the device via a standard web browser. This object should be
- treated as write-only and returned as asterisks."
- ::= { orinocoHTTP 2 }
-
- oriHTTPPort OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the TCP/IP port by which the HTTP server
- will be accessible."
- ::= { orinocoHTTP 3 }
-
- oriHTTPWebSitenameTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriHTTPWebSitenameTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table is used to store the different website interfaces
- stored in the device. Different interfaces can be used to
- support multiple languages, user levels (novice, expert), etc."
- ::= { orinocoHTTP 4 }
-
- oriHTTPWebSitenameTableEntry OBJECT-TYPE
- SYNTAX OriHTTPWebSitenameTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents an entry is the HTTP website name table."
- INDEX { oriHTTPWebSitenameTableIndex }
- ::= { oriHTTPWebSitenameTable 1 }
-
- OriHTTPWebSitenameTableEntry ::=
- SEQUENCE
- {
- oriHTTPWebSitenameTableIndex Integer32,
- oriHTTPWebSiteFilename DisplayString,
- oriHTTPWebSiteLanguage DisplayString,
- oriHTTPWebSiteDescription DisplayString,
- oriHTTPWebSitenameTableStatus INTEGER
- }
-
- oriHTTPWebSitenameTableIndex OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This objects represents the index to the website interface
- table."
- ::= { oriHTTPWebSitenameTableEntry 1 }
-
- oriHTTPWebSiteFilename OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the filename under which the website
- interface is stored in the device."
- ::= { oriHTTPWebSitenameTableEntry 2 }
-
- oriHTTPWebSiteLanguage OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the language of the website interface."
- ::= { oriHTTPWebSitenameTableEntry 3 }
-
- oriHTTPWebSiteDescription OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object provides a description for the website interface."
- ::= { oriHTTPWebSitenameTableEntry 4 }
-
- oriHTTPWebSitenameTableStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2),
- delete(3)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable, disable, or delete a website
- interface file."
- ::= { oriHTTPWebSitenameTableEntry 5 }
-
- oriHTTPRefreshDelay OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used for the automatic refresh delay for the
- website pages."
- ::= { orinocoHTTP 5 }
-
- oriHTTPHelpInformationLink OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to configure the link in the web
- interface for where help information can be retrieved."
- ::= { orinocoHTTP 6 }
-
- oriHTTPSSLStatus OBJECT-TYPE
- SYNTAX ObjStatus
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable SSL on HTTP based
- management."
- DEFVAL { disable }
- ::= { orinocoHTTP 7 }
-
- oriHTTPSSLPassphrase OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to specify the SSL certificate
- passphrase on HTTP based management. This object should
- be treated as write-only and returned as asterisks."
- ::= { orinocoHTTP 8 }
-
- oriHTTPSetupWizardStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable the HTT setup wizard. The
- user can manually disable this functionality or when the setup wizard
- completes it process successfully it sets this object to disable."
- DEFVAL { enable }
- ::= { orinocoHTTP 9 }
-
- oriHTTPRADIUSAccessControl OBJECT-TYPE
- SYNTAX ObjStatus
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable/disable RADIUS Based Authentication
- for HTTP based management."
- DEFVAL { disable }
- ::= { orinocoHTTP 10 }
-
- --=============================================================================
- -- The WDS Group: orinocoWDS
- --=============================================================================
-
- oriWDSSetupTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriWDSSetupTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table is used in to configure the WDS feature in the device."
- ::= { orinocoWDS 1 }
-
- oriWDSSetupTableEntry OBJECT-TYPE
- SYNTAX OriWDSSetupTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents an entry in the WDS table. Note this
- table is index by ifIndex and WDS table index."
- INDEX { ifIndex, oriWDSSetupTablePortIndex }
- ::= { oriWDSSetupTable 1 }
-
- OriWDSSetupTableEntry ::=
- SEQUENCE
- {
- oriWDSSetupTablePortIndex Integer32,
- oriWDSSetupTableEntryStatus INTEGER,
- oriWDSSetupTablePartnerMACAddress PhysAddress
- }
-
- oriWDSSetupTablePortIndex OBJECT-TYPE
- SYNTAX Integer32 (1..6)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the WDS port number."
- ::= { oriWDSSetupTableEntry 1 }
-
- oriWDSSetupTableEntryStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable a WDS table entry (link)."
- ::= { oriWDSSetupTableEntry 2 }
-
- oriWDSSetupTablePartnerMACAddress OBJECT-TYPE
- SYNTAX PhysAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the partner MAC address for a WDS table
- entry (link)."
- ::= { oriWDSSetupTableEntry 3 }
-
- oriWDSSecurityTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriWDSSecurityTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table is used in to configure the WDS security modes for all
- entries in the WDS table."
- ::= { orinocoWDS 2 }
-
- oriWDSSecurityTableEntry OBJECT-TYPE
- SYNTAX OriWDSSecurityTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents an entry in the WDS security table. Note this
- table is index by ifIndex since the security configuration will apply
- for all the WDS links per interface."
- INDEX { ifIndex }
- ::= { oriWDSSecurityTable 1 }
-
- OriWDSSecurityTableEntry ::=
- SEQUENCE
- {
- oriWDSSecurityTableSecurityMode INTEGER,
- oriWDSSecurityTableEncryptionKey0 WEPKeyType
- }
-
- oriWDSSecurityTableSecurityMode OBJECT-TYPE
- SYNTAX INTEGER
- {
- none(1),
- wep(6)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to configure the WDS security mode. Currently
- the supported WDS security modes are none and wep."
- ::= { oriWDSSecurityTableEntry 1 }
-
- oriWDSSecurityTableEncryptionKey0 OBJECT-TYPE
- SYNTAX WEPKeyType
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the WDS Encryption Key 0. When the WDS
- security mode is configured to wep, this object must be configured to
- a valid value. This object should be treated as write-only and
- returned as asterisks."
- ::= { oriWDSSecurityTableEntry 2 }
-
- --=============================================================================
- -- The Trap Group: orinocoTrap
- --=============================================================================
-
- --=============================================================================
- -- The Trap Variables: oriTrapVariable
- --=============================================================================
-
- oriTrapVariable OBJECT IDENTIFIER
- ::= { orinocoTrap 1 }
-
- oriGenericTrapVariable OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used to provide additional information on traps."
- ::= { oriTrapVariable 1 }
-
- oriTrapVarMACAddress OBJECT-TYPE
- SYNTAX PhysAddress
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used to store the MAC address of the device
- that has sent a trap."
- ::= { oriTrapVariable 2 }
-
- oriTrapVarTFTPIPAddress OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used to store the IP Address of the TFTP server."
- ::= { oriTrapVariable 3 }
-
- oriTrapVarTFTPFilename OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used to store the name of the file on which the
- TFTP operation has occurred."
- ::= { oriTrapVariable 4 }
-
- oriTrapVarTFTPOperation OBJECT-TYPE
- SYNTAX INTEGER
- {
- upload(1),
- download(2)
- }
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used to store the TFTP operation that failed,
- either download or upload."
- ::= { oriTrapVariable 5 }
-
- oriTrapVarUnauthorizedManagerIPaddress OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used to store the IP address of the unauthorized
- manager that has attempted to manage the device."
- ::= { oriTrapVariable 6 }
-
- oriTrapVarFailedAuthenticationType OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This trap variable is used to specify the client authentication
- method/type that failed. The authentication methods/types are
- dependant on the device and can range from the following:
- - MAC Access Control Table
- - RADIUS MAC Authentication
- - 802.1x Authentication specifying the EAP-Type
- - WORP Mutual Authentication
- - SSID Authorization Failure specifying the SSID
- - VLAN ID Authorization Failure specifying the VLAN ID"
- ::= { oriTrapVariable 7 }
-
- oriTrapVarUnAuthorizedManagerCount OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents a counter for the number of unauthorized
- SNMP managers that have attempted to modify and/or view the devices
- setup. When this number is incremented a trap should be sent out
- notifying the trap host(s) that an unauthorized station has
- attempted to configure or monitor the device the count should also
- be sent out in the trap message."
- ::= { oriTrapVariable 8 }
-
- oriTrapVarTaskSuspended OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used to inform what task has been suspended
- on the device."
- ::= { oriTrapVariable 9 }
-
- oriTrapVarUnauthorizedClientMACAddress OBJECT-TYPE
- SYNTAX PhysAddress
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used to store the MAC Address of an
- unauthorized client station."
- ::= { oriTrapVariable 17 }
-
- oriTrapVarWirelessCard OBJECT-TYPE
- SYNTAX INTEGER
- {
- pcCardA(1),
- pcCardB(2)
- }
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used to determine on which Wireless Card,
- PC Card A or PC Card B, a wireless TRAP has occured on."
- ::= { oriTrapVariable 18 }
-
- oriTrapVarInterface OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used to store the interface number."
- ::= { oriTrapVariable 21 }
-
- oriTrapVarBatchCLIFilename OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used to store filename used for Batch CLI execution."
- ::= { oriTrapVariable 22 }
-
- oriTrapVarBatchCLIMessage OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used to store message from Batch CLI execution."
- ::= { oriTrapVariable 23 }
-
- oriTrapVarBatchCLILineNumber OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used to store line number of command executed in Batch
- CLI."
- ::= { oriTrapVariable 24 }
-
- oriTrapVarDHCPServerIPAddress OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used to store the DHCP Server IP Address from which
- the access point has received an IP address as a result of the a DHCP
- client request."
- ::= { oriTrapVariable 25 }
-
- oriTrapVarIPAddress OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is a trap variable/object to store an IP address."
- ::= { oriTrapVariable 26 }
-
- oriTrapVarSubnetMask OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is a trap variable/object to store a subnet mask."
- ::= { oriTrapVariable 27 }
-
- oriTrapVarDefaultRouterIPAddress OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is a trap variable/object to store a default router
- or gateway IP address."
- ::= { oriTrapVariable 28 }
-
- --=============================================================================
- -- The Enable/Disable Trap Group Variables
- --=============================================================================
-
- oriConfigurationTrapsStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable the configuration
- related traps."
- ::= { oriTrapVariable 10 }
-
- oriSecurityTrapsStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable the security
- related traps."
- ::= { oriTrapVariable 11 }
-
- oriWirelessIfTrapsStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable the wireless
- interface/card related traps."
- ::= { oriTrapVariable 12 }
-
- oriOperationalTrapsStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable the operational
- related traps."
- ::= { oriTrapVariable 13 }
-
- oriFlashMemoryTrapsStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable the flash memory
- related traps."
- ::= { oriTrapVariable 14 }
-
- oriTFTPTrapsStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable the TFTP
- related traps."
- ::= { oriTrapVariable 15 }
-
- oriTrapsImageStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable the Image
- related traps."
- ::= { oriTrapVariable 16 }
-
- oriADSLIfTrapsStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable the ADSL
- interface related traps."
- ::= { oriTrapVariable 19 }
-
- oriWORPTrapsStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable the WORP related traps."
- ::= { oriTrapVariable 20 }
-
- --=============================================================================
- -- The IP/ARP Group: orinocoIPARP
- --=============================================================================
-
- oriProxyARPStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable/disable the Proxy ARP functionality
- in the device."
- DEFVAL { enable }
- ::= { orinocoIPARP 1 }
-
- oriIPARPFilteringStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable/disable the IP/ARP functionality
- in the device."
- DEFVAL { disable }
- ::= { orinocoIPARP 2 }
-
- oriIPARPFilteringIPAddress OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to specify the IP/ARP Filtering address
- in the device."
- ::= { orinocoIPARP 3 }
-
- oriIPARPFilteringSubnetMask OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to specify the IP/ARP Subnet Mask
- in the device."
- ::= { orinocoIPARP 4 }
-
- --=============================================================================
- -- The Spanning Tree Group: orinocoSpanningTree
- --=============================================================================
-
- oriSpanningTreeStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable/disable the spanning tree protocol
- in the device."
- DEFVAL { enable }
- ::= { orinocoSpanningTree 1 }
-
- --=============================================================================
- -- The Security Group: orinocoSecurity
- --=============================================================================
-
- oriSecurityConfiguration OBJECT-TYPE
- SYNTAX INTEGER
- {
- none(1),
- dot1x(2),
- mixedWepAnddot1x(3)
- }
- MAX-ACCESS read-write
- STATUS deprecated
- DESCRIPTION
- "This object represents the supported security configuration options.
- This object has been deprecated."
- DEFVAL { none }
- ::= { orinocoSecurity 1 }
-
- oriSecurityEncryptionKeyLengthTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriSecurityEncryptionKeyLengthTableEntry
- MAX-ACCESS not-accessible
- STATUS deprecated
- DESCRIPTION
- "This table is used to specify the encryption key length for
- the wireless interface(s). This table has been deprecated."
- ::= { orinocoSecurity 2 }
-
- oriSecurityEncryptionKeyLengthTableEntry OBJECT-TYPE
- SYNTAX OriSecurityEncryptionKeyLengthTableEntry
- MAX-ACCESS not-accessible
- STATUS deprecated
- DESCRIPTION
- "This object represents an entry in the encryption key
- length table. This object has been deprecated."
- INDEX { ifIndex }
- ::= { oriSecurityEncryptionKeyLengthTable 1 }
-
- OriSecurityEncryptionKeyLengthTableEntry ::=
- SEQUENCE
- {
- oriSecurityEncryptionKeyLength INTEGER
- }
-
- oriSecurityEncryptionKeyLength OBJECT-TYPE
- SYNTAX INTEGER
- {
- sixtyFourBits(1),
- oneHundredTwentyEightBits(2)
- }
- MAX-ACCESS read-write
- STATUS deprecated
- DESCRIPTION
- "This object represents the encryption key length, the supported
- key lengths are 64 bits (40 + 24 for IV), and 128 bits
- (104 + 24 for IV). This object has been deprecated."
- DEFVAL { sixtyFourBits }
- ::= { oriSecurityEncryptionKeyLengthTableEntry 1 }
-
- oriSecurityRekeyingInterval OBJECT-TYPE
- SYNTAX Integer32 (60..65535)
- MAX-ACCESS read-write
- STATUS deprecated
- DESCRIPTION
- "This object represents the encryption rekeying interval in seconds.
- This object has been deprecated."
- ::= { orinocoSecurity 3 }
-
- --=============================================================================
- -- The Rogue AP Detection Subgroup: orinocoRAD
- --=============================================================================
-
- oriRADStatus OBJECT-TYPE
- SYNTAX ObjStatus
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object allows to enable or disable the RAD service in the
- device."
- DEFVAL { disable }
- ::= { orinocoRAD 1 }
-
- oriRADInterval OBJECT-TYPE
- SYNTAX Integer32 (15..1440)
- UNITS "seconds"
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to identify the interval at which the RAD feature
- will initialize. The units of this object is minutes."
- DEFVAL { 15 }
- ::= { orinocoRAD 2 }
-
- oriRADInterfaceBitmask OBJECT-TYPE
- SYNTAX InterfaceBitmask
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to configure the interface(s) on which the RAD
- feature will operate on."
- ::= { orinocoRAD 3 }
-
- oriRADLastSuccessfulScanTime OBJECT-TYPE
- SYNTAX TimeTicks
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is the number of seconds that have elapsed since the
- last successful RAD scan since the AP has started up."
- ::= { orinocoRAD 4 }
-
- oriRADAccessPointCount OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of access points that were
- discovered since the last RAD scan."
- ::= { orinocoRAD 5 }
-
- oriRADScanResultsTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriRADScanResultsTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table is used to store the RAD scan results. Each entry
- represents an access point scanned in the network."
- ::= { orinocoRAD 6 }
-
- oriRADScanResultsTableEntry OBJECT-TYPE
- SYNTAX OriRADScanResultsTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents an entry in the RAD scan results table."
- INDEX { oriRADScanResultsTableIndex }
- ::= { oriRADScanResultsTable 1 }
-
- OriRADScanResultsTableEntry ::=
- SEQUENCE
- {
- oriRADScanResultsTableIndex Integer32,
- oriRADScanResultsMACAddress PhysAddress,
- oriRADScanResultsFrequencyChannel Integer32
- }
-
- oriRADScanResultsTableIndex OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used as the index to the scan results table."
- ::= { oriRADScanResultsTableEntry 1 }
-
- oriRADScanResultsMACAddress OBJECT-TYPE
- SYNTAX PhysAddress
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the MAC address of the access point detected during
- a RAD scan."
- ::= { oriRADScanResultsTableEntry 2 }
-
- oriRADScanResultsFrequencyChannel OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the frequency channel of the access point."
- ::= { oriRADScanResultsTableEntry 3 }
-
- --=============================================================================
- -- The Rogue Scan Subgroup: orinocoRogueScan
- --=============================================================================
-
- oriRogueScanConfigTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriRogueScanConfigTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table is used to configure the Rogue Scan feature per wireless
- network interface card."
- ::= { orinocoRogueScan 1 }
-
- oriRogueScanConfigTableEntry OBJECT-TYPE
- SYNTAX OriRogueScanConfigTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents an entry in the Rogue Scan Config Table."
- INDEX { ifIndex }
- ::= { oriRogueScanConfigTable 1 }
-
- OriRogueScanConfigTableEntry ::=
- SEQUENCE
- {
- oriRogueScanConfigTableScanMode INTEGER,
- oriRogueScanConfigTableScanCycleTime Integer32,
- oriRogueScanConfigTableScanStatus ObjStatus
- }
-
- oriRogueScanConfigTableScanMode OBJECT-TYPE
- SYNTAX INTEGER
- {
- bkScanMode(1),
- contScanMode(2)
- }
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object is used to configure the scan mode for the wireless NIC."
- DEFVAL { bkScanMode }
- ::= { oriRogueScanConfigTableEntry 1 }
-
- oriRogueScanConfigTableScanCycleTime OBJECT-TYPE
- SYNTAX Integer32 (1..1440)
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object is used to configure the rogue scan cycle time for the
- wireless NIC."
- DEFVAL { 1 }
- ::= { oriRogueScanConfigTableEntry 2 }
-
- oriRogueScanConfigTableScanStatus OBJECT-TYPE
- SYNTAX ObjStatus
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object is used to enable/disable rogue scan on the wireless
- NIC."
- ::= { oriRogueScanConfigTableEntry 3 }
-
- oriRogueScanStationCountWirelessCardA OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of stations that were
- discovered/detected on the device's wireless NIC A."
- ::= { orinocoRogueScan 2 }
-
- oriRogueScanStationCountWirelessCardB OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of stations that were
- discovered/detected on the device's wireless NIC B."
- ::= { orinocoRogueScan 3 }
-
- oriRogueScanResultsTableAgingTime OBJECT-TYPE
- SYNTAX Integer32 (60..7200)
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object represents the aging time for the entries in
- RogueScanResultsTable, after which the entries are removed from
- RogueScanResultsTable."
- DEFVAL { 60 }
- ::= { orinocoRogueScan 4 }
-
- oriRogueScanResultsTableClearEntries OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object is used to remove the content/entries of
- RogueScanResultsTable. When this object is set, the content of the
- table shall be cleared."
- ::= { orinocoRogueScan 5 }
-
- oriRogueScanResultsNotificationMode OBJECT-TYPE
- SYNTAX INTEGER
- {
- noNotification(1),
- notifyAP(2),
- notifyClient(3),
- notifyAll(4)
- }
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object is used to configure the trap/notification mode for
- detected stations during Rogue Scan."
- DEFVAL { notifyAll }
- ::= { orinocoRogueScan 6 }
-
- oriRogueScanResultsTrapReportType OBJECT-TYPE
- SYNTAX INTEGER
- {
- reportSinceLastScan(1),
- reportSinceStartOfScan(2)
- }
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object is used to configure the trap/notification report type
- for detected stations during Rogue Scan."
- DEFVAL { reportSinceLastScan }
- ::= { orinocoRogueScan 7 }
-
- oriRogueScanResultsTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriRogueScanResultsTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table is used to store the rogue scan results. Each entry
- represents a rogue wireless station detected in the network."
- ::= { orinocoRogueScan 8 }
-
- oriRogueScanResultsTableEntry OBJECT-TYPE
- SYNTAX OriRogueScanResultsTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents an entry in the rogue scan results table."
- INDEX { oriRogueScanResultsTableIndex }
- ::= { oriRogueScanResultsTable 1 }
-
- OriRogueScanResultsTableEntry ::=
- SEQUENCE
- {
- oriRogueScanResultsTableIndex Integer32,
- oriRogueScanResultsStationType INTEGER,
- oriRogueScanResultsMACAddress PhysAddress,
- oriRogueScanResultsFrequencyChannel DisplayString,
- oriRogueScanResultsSNR Integer32,
- oriRogueScanResultsBSSID MacAddress
- }
-
- oriRogueScanResultsTableIndex OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used as the index to the rogue scan results table."
- ::= { oriRogueScanResultsTableEntry 1 }
-
- oriRogueScanResultsStationType OBJECT-TYPE
- SYNTAX INTEGER
- {
- unknown(1),
- infrastructureClient(2),
- accessPoint(3),
- ibssClient(4)
- }
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the type of station detected during a
- rogue scan."
- ::= { oriRogueScanResultsTableEntry 2 }
-
- oriRogueScanResultsMACAddress OBJECT-TYPE
- SYNTAX PhysAddress
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the MAC address of the station detected during
- a rogue scan."
- ::= { oriRogueScanResultsTableEntry 3 }
-
- oriRogueScanResultsFrequencyChannel OBJECT-TYPE
- SYNTAX DisplayString (SIZE(32))
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the frequency channel on which the rogue
- wireless stations was detected."
- ::= { oriRogueScanResultsTableEntry 5 }
-
- oriRogueScanResultsSNR OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the signal to noise ration (SNR) for the
- station detected during a rogue scan."
- ::= { oriRogueScanResultsTableEntry 6 }
-
- oriRogueScanResultsBSSID OBJECT-TYPE
- SYNTAX MacAddress
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents BSSID of the station detected during a
- rogue scan."
- ::= { oriRogueScanResultsTableEntry 7 }
-
- --=============================================================================
- -- The Security Configuration Table: oriSecurityConfigTable
- --=============================================================================
-
- oriSecurityConfigTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriSecurityConfigTableEntry
- MAX-ACCESS not-accessible
- STATUS deprecated
- DESCRIPTION
- "This table is used to specify the security configuration for
- the wireless interface(s) in the access point."
- ::= { orinocoSecurity 5 }
-
- oriSecurityConfigTableEntry OBJECT-TYPE
- SYNTAX OriSecurityConfigTableEntry
- MAX-ACCESS not-accessible
- STATUS deprecated
- DESCRIPTION
- "This object represents an entry in the security configuration table."
- INDEX { ifIndex }
- ::= { oriSecurityConfigTable 1 }
-
- OriSecurityConfigTableEntry ::=
- SEQUENCE
- {
- oriSecurityConfigTableSupportedSecurityModes DisplayString,
- oriSecurityConfigTableSecurityMode INTEGER,
- oriSecurityConfigTableRekeyingInterval Integer32,
- oriSecurityConfigTableEncryptionKeyLength INTEGER
- }
-
- oriSecurityConfigTableSupportedSecurityModes OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS deprecated
- DESCRIPTION
- "This object is used to provide information on the supported
- security modes by the wireless interface(s). The possible security
- modes can be:
- - None: no security mode enabled.
- - dot1x: 802.1x authentication enabled.
- - mixed: mixed WEP and 802.1x.
- - wpa: WiFi Protected Access enabled.
- - wpa-psk: WiFi Protected Access with Preshared Keys enabled."
- ::= { oriSecurityConfigTableEntry 1 }
-
- oriSecurityConfigTableSecurityMode OBJECT-TYPE
- SYNTAX INTEGER
- {
- none(1),
- dot1x(2),
- mixed(3),
- wpa(4),
- wpa-psk(5)
- }
- MAX-ACCESS read-write
- STATUS deprecated
- DESCRIPTION
- "This object is used to configure the security mode. The supported
- security modes are:
- - None: no security mode enabled.
- - dot1x: 802.1x authentication enabled.
- - mixed: mixed WEP and 802.1x.
- - wpa: WiFi Protected Access enabled.
- - wpa-psk: WiFi Protected Access with Preshared Keys enabled."
- DEFVAL { none }
- ::= { oriSecurityConfigTableEntry 2 }
-
- oriSecurityConfigTableRekeyingInterval OBJECT-TYPE
- SYNTAX Integer32 (60..65535)
- UNITS "seconds"
- MAX-ACCESS read-write
- STATUS deprecated
- DESCRIPTION
- "This object represents the encryption rekeying interval in seconds."
- ::= { oriSecurityConfigTableEntry 3 }
-
- oriSecurityConfigTableEncryptionKeyLength OBJECT-TYPE
- SYNTAX INTEGER
- {
- sixtyFourBits(1),
- oneHundredTwentyEightBits(2),
- oneHundredFiftyTwoBits(3)
- }
- MAX-ACCESS read-write
- STATUS deprecated
- DESCRIPTION
- "This object represents the encryption key length, the supported
- key lengths are 64 bits (40 + 24 for IV), 128 bits
- (104 + 24 for IV), and 152 bits (128 + 24 for IV)."
- DEFVAL { sixtyFourBits }
- ::= { oriSecurityConfigTableEntry 4 }
-
- oriSecurityHwConfigResetStatus OBJECT-TYPE
- SYNTAX ObjStatus
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable/disable the status of configuration
- reset using the hardware reset button."
- DEFVAL { enable }
- ::= { orinocoSecurity 6 }
-
- oriSecurityHwConfigResetPassword OBJECT-TYPE
- SYNTAX DisplayString (SIZE(6..32))
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the configuration reset password. This object
- should be treated as write-only and returned as asterisks."
- ::= { orinocoSecurity 7 }
-
- --=============================================================================
- -- The Security Profile Table: oriSecurityProfileTable
- --=============================================================================
-
- oriSecurityProfileTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriSecurityProfileTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table is used to configure a security profile. A security
- profile can consist of single or muliple security modes."
- ::= { orinocoSecurity 9 }
-
- oriSecurityProfileTableEntry OBJECT-TYPE
- SYNTAX OriSecurityProfileTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents an entry in the security profile table.
- This table is index by two indices - the first/primary index defines
- the security profile, the second index defines a single or multiple
- security policies per profile. The primary index is used in the
- wireless interface SSID table to specify which security profile to
- use per SSID.
-
- The admin/user can configure policies for different wireless station
- types by specifying a authentication and cipher mode/type. Below are
- examples of how to configure different STA types.
-
- STA Type Authentication Mode Cipher Mode
- ======== =================== ===========
- Non Secure None None
- WEP None WEP (64, 128, 152)
- 802.1x 802.1x WEP (64, 128)
- WPA 802.1x TKIP
- WPA-PSK PSK TKIP
- 802.11i 802.1x AES
- 802.11i-PSK PSK AES
-
- In the case of None, WEP, WPA-PSK, and 802.11i-PSK, MAC Access Control
- Table/List and RADIUS based MAC access control can be used to
- authenticate the wireless STA."
- INDEX { oriSecurityProfileTableIndex,
- oriSecurityProfileTableSecModeIndex }
- ::= { oriSecurityProfileTable 1 }
-
- OriSecurityProfileTableEntry ::=
- SEQUENCE
- {
- oriSecurityProfileTableIndex Integer32,
- oriSecurityProfileTableSecModeIndex Integer32,
- oriSecurityProfileTableAuthenticationMode INTEGER,
- oriSecurityProfileTableCipherMode INTEGER,
- oriSecurityProfileTableEncryptionKey0 WEPKeyType,
- oriSecurityProfileTableEncryptionKey1 WEPKeyType,
- oriSecurityProfileTableEncryptionKey2 WEPKeyType,
- oriSecurityProfileTableEncryptionKey3 WEPKeyType,
- oriSecurityProfileTableEncryptionTxKey Integer32,
- oriSecurityProfileTableEncryptionKeyLength INTEGER,
- oriSecurityProfileTablePSKValue OCTET STRING,
- oriSecurityProfileTablePSKPassPhrase DisplayString,
- oriSecurityProfileTableStatus RowStatus
- }
-
- oriSecurityProfileTableIndex OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the primary index of the Security Policy
- Table. This index is used to specify which security policy will
- be used per SSID, in the Wireless Interface SSID Table. A security
- policy can consist of a single or multiple security modes."
- ::= { oriSecurityProfileTableEntry 1 }
-
- oriSecurityProfileTableSecModeIndex OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is the secondary index to the Security Policy Table.
- This index will represent the different security modes per security
- profile."
- ::= { oriSecurityProfileTableEntry 2 }
-
- oriSecurityProfileTableAuthenticationMode OBJECT-TYPE
- SYNTAX INTEGER
- {
- none(1),
- dot1x(2),
- psk(3)
- }
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used to specify the authentication mode for the
- security mode."
- DEFVAL { none }
- ::= { oriSecurityProfileTableEntry 3 }
-
- oriSecurityProfileTableCipherMode OBJECT-TYPE
- SYNTAX INTEGER
- {
- none(1),
- wep(2),
- tkip(3),
- aes(4)
- }
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used to specify the cipher mode/type for the security
- mode."
- DEFVAL { none }
- ::= { oriSecurityProfileTableEntry 4 }
-
- oriSecurityProfileTableEncryptionKey0 OBJECT-TYPE
- SYNTAX WEPKeyType
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object represents Encryption Key 0. This object should be
- treated as write-only and returned as asterisks."
- ::= { oriSecurityProfileTableEntry 5 }
-
- oriSecurityProfileTableEncryptionKey1 OBJECT-TYPE
- SYNTAX WEPKeyType
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object represents Encryption Key 1. This object should be
- treated as write-only and returned as asterisks."
- ::= { oriSecurityProfileTableEntry 6 }
-
- oriSecurityProfileTableEncryptionKey2 OBJECT-TYPE
- SYNTAX WEPKeyType
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object represents Encryption Key 2. This object should be
- treated as write-only and returned as asterisks."
- ::= { oriSecurityProfileTableEntry 7 }
-
- oriSecurityProfileTableEncryptionKey3 OBJECT-TYPE
- SYNTAX WEPKeyType
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object represents Encryption Key 3. This object should be
- treated as write-only and returned as asterisks."
- ::= { oriSecurityProfileTableEntry 8 }
-
- oriSecurityProfileTableEncryptionTxKey OBJECT-TYPE
- SYNTAX Integer32 (0..3)
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object indicates which encryption key is used to encrypt
- data that is sent via the wireless interfaces. The default value
- for this object should be key 0."
- DEFVAL { 0 }
- ::= { oriSecurityProfileTableEntry 9 }
-
- oriSecurityProfileTableEncryptionKeyLength OBJECT-TYPE
- SYNTAX INTEGER
- {
- sixtyFourBits(1),
- oneHundredTwentyEightBits(2),
- oneHundredFiftyTwoBits(3)
- }
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object represents the encryption key length, the supported
- key lengths are 64 bits (40 + 24 for IV), 128 bits
- (104 + 24 for IV), and 152 bits (128 + 24 for IV)."
- DEFVAL { sixtyFourBits }
- ::= { oriSecurityProfileTableEntry 10 }
-
- oriSecurityProfileTablePSKValue OBJECT-TYPE
- SYNTAX OCTET STRING ( SIZE (32) )
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "The Pre-Shared Key (PSK) for when RSN in PSK mode is the selected
- authentication suite. In that case, the PMK will obtain its value
- from this object.
- This object is logically write-only. Reading this variable shall
- return unsuccessful status or null or zero."
- ::= { oriSecurityProfileTableEntry 11 }
-
- oriSecurityProfileTablePSKPassPhrase OBJECT-TYPE
- SYNTAX DisplayString ( SIZE( 8..63) )
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "The PSK, for when RSN in PSK mode is the selected authentication
- suite, is configured by oriWirelessIfSSIDTablePSKValue. An alternative
- manner of setting the PSK uses the password-to-key algorithm defined
- in the standard. This variable provides a means to enter a pass phrase.
- When this object is written, the RSN entity shall use the
- password-to-key algorithm specified in the standard to derive a
- pre-shared and populate oriWirelessIfSSIDTablePSKValue with this key.
- This object is logically write-only. Reading this variable shall
- return unsuccessful status or null or zero."
- ::= { oriSecurityProfileTableEntry 12 }
-
- oriSecurityProfileTableStatus OBJECT-TYPE
- SYNTAX RowStatus
- MAX-ACCESS read-create
- STATUS current
- DESCRIPTION
- "This object represents the Table row status."
- ::= { oriSecurityProfileTableEntry 14 }
-
- oriSecurityProfileFourWEPKeySupport OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to configure the security profile to use
- with four WEP keys. Currently only one security profile can be active
- which supports four WEP keys. Therefore this object is used to
- specify which profile will be using four WEP keys. The purpose of
- this object is to support legacy products/users that are still using
- four WEP keys."
- ::= { orinocoSecurity 10 }
-
- --=============================================================================
- -- The PPPoE Group: orinocoPPPoE
- --=============================================================================
-
- oriPPPoEStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object allows to enable or disable the PPPoE service in the
- device."
- DEFVAL { disable }
- ::= { orinocoPPPoE 1 }
-
- oriPPPoEMaximumNumberOfSessions OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the maximum number of PPPoE sessions."
- DEFVAL { 10 }
- ::= { orinocoPPPoE 2 }
-
- oriPPPoENumberOfActiveSessions OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of active PPPoE sessions."
- ::= { orinocoPPPoE 3 }
-
- oriPPPoESessionTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriPPPoESessionTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table is used to configure the PPPoE session information."
- ::= { orinocoPPPoE 4 }
-
- oriPPPoESessionTableEntry OBJECT-TYPE
- SYNTAX OriPPPoESessionTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents an entry in the PPPoE session table."
- INDEX { oriPPPoESessionTableIndex }
- ::= { oriPPPoESessionTable 1 }
-
- OriPPPoESessionTableEntry ::=
- SEQUENCE
- {
- oriPPPoESessionTableIndex Integer32,
- oriPPPoESessionWANConnectMode INTEGER,
- oriPPPoESessionIdleTimeOut Integer32,
- oriPPPoESessionConnectTime Counter32,
- oriPPPoESessionConnectTimeLimitation Integer32,
- oriPPPoESessionConfigPADITxInterval Integer32,
- oriPPPoESessionConfigPADIMaxNumberOfRetries Integer32,
- oriPPPoESessionBindingsNumberPADITx Counter32,
- oriPPPoESessionBindingsNumberPADTTx Counter32,
- oriPPPoESessionBindingsNumberServiceNameErrors Counter32,
- oriPPPoESessionBindingsNumberACSystemErrors Counter32,
- oriPPPoESessionBindingsNumberGenericErrorsRx Counter32,
- oriPPPoESessionBindingsNumberGenericErrorsTx Counter32,
- oriPPPoESessionBindingsNumberMalformedPackets Counter32,
- oriPPPoESessionBindingsNumberMultiplePADORx Counter32,
- oriPPPoESessionUserName DisplayString,
- oriPPPoESessionUserNamePassword DisplayString,
- oriPPPoESessionServiceName DisplayString,
- oriPPPoESessionISPName DisplayString,
- oriPPPoESessionTableStatus INTEGER,
- oriPPPoESessionWANManualConnect INTEGER,
- oriPPPoESessionWANConnectionStatus INTEGER
- }
-
- oriPPPoESessionTableIndex OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used as the index to the PPPoE Session Table."
- ::= { oriPPPoESessionTableEntry 1 }
-
- oriPPPoESessionWANConnectMode OBJECT-TYPE
- SYNTAX INTEGER
- {
- alwaysOn(1),
- onDemand(2),
- manual(3)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the WAN connect mode."
- DEFVAL { alwaysOn }
- ::= { oriPPPoESessionTableEntry 2 }
-
- oriPPPoESessionIdleTimeOut OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used as a timeout for the PPPoE session to be
- disconnected from public side if idle for specified amount of
- time."
- ::= { oriPPPoESessionTableEntry 3 }
-
- oriPPPoESessionConnectTime OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object identifies the PPPoE session connect time."
- ::= { oriPPPoESessionTableEntry 4 }
-
- oriPPPoESessionConnectTimeLimitation OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the maximum connection time per session."
- DEFVAL { 0 }
- ::= { oriPPPoESessionTableEntry 5 }
-
- oriPPPoESessionConfigPADITxInterval OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the time in seconds between PADI retries
- from the Host."
- ::= { oriPPPoESessionTableEntry 6 }
-
- oriPPPoESessionConfigPADIMaxNumberOfRetries OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the number of times the Host sends
- a PADI."
- ::= { oriPPPoESessionTableEntry 7 }
-
- oriPPPoESessionBindingsNumberPADITx OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of PPPoE PADI transmitted."
- ::= { oriPPPoESessionTableEntry 8 }
-
- oriPPPoESessionBindingsNumberPADTTx OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of PPPoE PADT transmitted."
- ::= { oriPPPoESessionTableEntry 9 }
-
- oriPPPoESessionBindingsNumberServiceNameErrors OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of PPPoE Service-Name-Error
- tags received/transmitted."
- ::= { oriPPPoESessionTableEntry 10 }
-
- oriPPPoESessionBindingsNumberACSystemErrors OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of PPPoE AC-System-Error
- tags received/transmitted."
- ::= { oriPPPoESessionTableEntry 11 }
-
- oriPPPoESessionBindingsNumberGenericErrorsRx OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of PPPoE Generic-Error
- tags received."
- ::= { oriPPPoESessionTableEntry 12 }
-
- oriPPPoESessionBindingsNumberGenericErrorsTx OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of PPPoE Generic Error
- tags transmitted."
- ::= { oriPPPoESessionTableEntry 13 }
-
- oriPPPoESessionBindingsNumberMalformedPackets OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents teh number of malformed PPPoE
- packets received."
- ::= { oriPPPoESessionTableEntry 14 }
-
- oriPPPoESessionBindingsNumberMultiplePADORx OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of PPPoE multiple PADO's
- received after a PADI request."
- ::= { oriPPPoESessionTableEntry 15 }
-
- oriPPPoESessionUserName OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the PPPoE user name."
- ::= { oriPPPoESessionTableEntry 16 }
-
- oriPPPoESessionUserNamePassword OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the PPPoE user name password. This object
- should be treated as write-only and returned as asterisks."
- ::= { oriPPPoESessionTableEntry 17 }
-
- oriPPPoESessionServiceName OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the PPPoE service name."
- ::= { oriPPPoESessionTableEntry 18 }
-
- oriPPPoESessionISPName OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the PPPoE ISP name."
- ::= { oriPPPoESessionTableEntry 19 }
-
- oriPPPoESessionTableStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2),
- delete(3),
- create(4)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the PPPoE ISP table entry status."
- ::= { oriPPPoESessionTableEntry 20 }
-
- oriPPPoESessionWANManualConnect OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to connect of disconnect the PPPoE session
- when the connect mode is set to manual."
- ::= { oriPPPoESessionTableEntry 21 }
-
- oriPPPoESessionWANConnectionStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- null(1),
- start(2),
- addingStack(3),
- stackAdded(4),
- stackAddError(5),
- connectFailed(6),
- authFailed(7),
- up(8),
- down(9),
- suspended(10),
- unknown(11)
- }
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the state of the PPPoE WAN connection
- interface."
- ::= { oriPPPoESessionTableEntry 22 }
-
- oriPPPoEMACtoSessionTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriPPPoEMACtoSessionTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table is used to map client MAC address to PPPoE Session
- information for an ISP."
- ::= { orinocoPPPoE 5 }
-
- oriPPPoEMACtoSessionTableEntry OBJECT-TYPE
- SYNTAX OriPPPoEMACtoSessionTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents an entry in the PPPoE MAC to
- Session table."
- INDEX { oriPPPoEMACtoSessionTableIndex }
- ::= { oriPPPoEMACtoSessionTable 1 }
-
- OriPPPoEMACtoSessionTableEntry ::=
- SEQUENCE
- {
- oriPPPoEMACtoSessionTableIndex Integer32,
- oriPPPoEMACtoSessionTableMACAddress PhysAddress,
- oriPPPoEMACtoSessionTableISPName DisplayString,
- oriPPPoEMACtoSessionTableStatus INTEGER
- }
-
- oriPPPoEMACtoSessionTableIndex OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used as the index to the PPPoE Session Table."
- ::= { oriPPPoEMACtoSessionTableEntry 1 }
-
- oriPPPoEMACtoSessionTableMACAddress OBJECT-TYPE
- SYNTAX PhysAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the client MAC address."
- ::= { oriPPPoEMACtoSessionTableEntry 2 }
-
- oriPPPoEMACtoSessionTableISPName OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the ISP name."
- ::= { oriPPPoEMACtoSessionTableEntry 3 }
-
- oriPPPoEMACtoSessionTableStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2),
- delete(3),
- create(4)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the PPPoE MAC to Session table
- entry status."
- ::= { oriPPPoEMACtoSessionTableEntry 4 }
-
- --=============================================================================
- -- The Configuration Group: orinocoConfig
- --=============================================================================
-
- oriConfigResetToDefaults OBJECT-TYPE
- SYNTAX INTEGER
- {
- bridgeMode(1),
- gatewayMode(2),
- gatewayModeDHCPClient(3),
- gatewayModePPPoE(4)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the quickstart modes that the
- device can be configured in."
- DEFVAL { gatewayMode }
- ::= { orinocoConfig 1 }
-
- oriConfigFileTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriConfigFileTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table contains the current configuration files stored in the
- device. This table is used to manage the different configuration
- files."
- ::= { orinocoConfig 2 }
-
- oriConfigFileTableEntry OBJECT-TYPE
- SYNTAX OriConfigFileTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents an entry in the configuration file table."
- INDEX { oriConfigFileTableIndex }
- ::= { oriConfigFileTable 1 }
-
- OriConfigFileTableEntry ::=
- SEQUENCE
- {
- oriConfigFileTableIndex Integer32,
- oriConfigFileName DisplayString,
- oriConfigFileStatus INTEGER
- }
-
- oriConfigFileTableIndex OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the index to the configuration file
- table."
- ::= { oriConfigFileTableEntry 1 }
-
- oriConfigFileName OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the configuration file name."
- ::= { oriConfigFileTableEntry 2 }
-
- oriConfigFileStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2),
- delete(3)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the status of the configuration file.
- The possible options are:
- - Enable: active configuration file
- - Disable: inactive configuration file
- - Delete: in order to delete the configuration file"
- ::= { oriConfigFileTableEntry 3 }
-
- oriConfigSaveFile OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object saves the configuration to the specified name."
- ::= { orinocoConfig 3 }
-
- oriConfigSaveKnownGood OBJECT-TYPE
- SYNTAX INTEGER
- {
- saveKnownGood(1)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to identify the last know good configuration
- file used. Setting a value of 1 to this objecgt saves the current
- configuration as the known good configuration."
- ::= { orinocoConfig 4 }
-
- --=============================================================================
- -- The DNS Group: orinocoDNS
- --=============================================================================
-
- --=============================================================================
- -- The DNS Redirect Group: orinocoDNS
- --=============================================================================
-
- oriDNSRedirectStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable the DNS Redirect
- functionality."
- DEFVAL { enable }
- ::= { orinocoDNS 1 }
-
- oriDNSRedirectMaxResponseWaitTime OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the maximum response wait time for
- DNS redirect. The units for this object is seconds."
- DEFVAL { 10 }
- ::= { orinocoDNS 2 }
-
- oriDNSPrimaryDNSIPAddress OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the Primary DNS IP Address."
- ::= { orinocoDNS 3 }
-
- oriDNSSecondaryDNSIPAddress OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the Secondary DNS IP Address."
- ::= { orinocoDNS 4 }
-
- --=============================================================================
- -- The DNS Client Subgroup: orinocoDNSClient
- --=============================================================================
-
- oriDNSClientStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable the DNS Client feature."
- DEFVAL { disable }
- ::= { orinocoDNSClient 1 }
-
- oriDNSClientPrimaryServerIPAddress OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the Primary Server DNS IP Address."
- ::= { orinocoDNSClient 2 }
-
- oriDNSClientSecondaryServerIPAddress OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the Secondary Server DNS IP Address."
- ::= { orinocoDNSClient 3 }
-
- oriDNSClientDefaultDomainName OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the default domain name for the DNS Client."
- ::= { orinocoDNSClient 4 }
-
- --=============================================================================
- -- The AOL Group: orinocoAOL
- --=============================================================================
-
- oriAOLNATALGStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable/disable the AOL NAT Application
- Level Gateway (ALG) support."
- DEFVAL { disable }
- ::= { orinocoAOL 1 }
-
- --=============================================================================
- -- The NAT Group: orinocoNAT
- --=============================================================================
-
- oriNATStatus OBJECT-TYPE
- SYNTAX ObjStatus
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable/disable the NAT feature."
- DEFVAL { disable }
- ::= { orinocoNAT 1 }
-
- oriNATType OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "A Bit Mask documenting the NAT device's actual
- configuration according to natTypeMask above.
-
- Its value may be one and only one of the options below:
- - Basic-NAT (Bit 0)
- - NAPT (Bit 1)
- - Bi-directional-NAT (Bit 2)
- - Twice-NAT (Bit 3)
- - RSA-IP-Server (Bit 4)
- - RSAP-IP-Server (Bit 5)
-
- - Bit 0, if set, indicates that Basic-NAT is configured.
- - Bit 1, if set, indicates that NAPT is configured.
- - Bit 2, if set, indicates that Bi-directional-NAT
- is configured.
- - Bit 3, if set, indicates that Twice-NAT is configured.
- - Bit 4, if set, indicates that RSA-IP-Server is
- configured.
- - Bit 5, if set, indicates that RSAP-IP-Server
- is configured."
- ::= { orinocoNAT 2 }
-
- oriNATStaticBindStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable static bind entries
- on the NAT device."
- ::= { orinocoNAT 3 }
-
- oriNATPublicIPAddress OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used to provide information on the NAT public IP
- Address."
- ::= { orinocoNAT 4 }
-
- oriNATStaticIPBindTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriNATStaticIPBindTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table contains NAT IP bind specific information."
- ::= { orinocoNAT 5 }
-
- oriNATStaticIPBindTableEntry OBJECT-TYPE
- SYNTAX OriNATStaticIPBindTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object is an entry in the NAT Static IP Bind Table."
- INDEX { oriNATStaticIPBindTableIndex }
- ::= { oriNATStaticIPBindTable 1 }
-
- OriNATStaticIPBindTableEntry ::=
- SEQUENCE
- {
- oriNATStaticIPBindTableIndex Integer32,
- oriNATStaticIPBindLocalAddress IpAddress,
- oriNATStaticIPBindRemoteAddress IpAddress,
- oriNATStaticIPBindTableEntryStatus INTEGER
- }
-
- oriNATStaticIPBindTableIndex OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used as the index for the NAT static IP
- bind table."
- ::= { oriNATStaticIPBindTableEntry 1 }
-
- oriNATStaticIPBindLocalAddress OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the local IP address for this NAT
- Static IP bind Table entry."
- ::= { oriNATStaticIPBindTableEntry 2 }
-
- oriNATStaticIPBindRemoteAddress OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the remote IP address for this NAT
- Static IP bind Table entry."
- ::= { oriNATStaticIPBindTableEntry 3 }
-
- oriNATStaticIPBindTableEntryStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2),
- delete(3),
- create(4)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "The object indicates the status of the NAT Static IP Bind
- Table entry."
- ::= { oriNATStaticIPBindTableEntry 4 }
-
- oriNATStaticPortBindTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriNATStaticPortBindTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table is used to configure NAT Port bind specific
- information."
- ::= { orinocoNAT 6 }
-
- oriNATStaticPortBindTableEntry OBJECT-TYPE
- SYNTAX OriNATStaticPortBindTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents an entry in the NAT Static Port Bind
- Table."
- INDEX { oriNATStaticPortBindTableIndex }
- ::= { oriNATStaticPortBindTable 1 }
-
- OriNATStaticPortBindTableEntry ::=
- SEQUENCE
- {
- oriNATStaticPortBindTableIndex Integer32,
- oriNATStaticPortBindLocalAddress IpAddress,
- oriNATStaticPortBindStartPortNumber Integer32,
- oriNATStaticPortBindEndPortNumber Integer32,
- oriNATStaticPortBindPortType INTEGER,
- oriNATStaticPortBindTableEntryStatus INTEGER
- }
-
- oriNATStaticPortBindTableIndex OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used as the index for the NAT static Port
- bind table."
- ::= { oriNATStaticPortBindTableEntry 1 }
-
- oriNATStaticPortBindLocalAddress OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the local IP address for this NAT Static
- Port bind Table entry."
- ::= { oriNATStaticPortBindTableEntry 2 }
-
- oriNATStaticPortBindStartPortNumber OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the start port number for this NAT Static
- Port bind Table entry."
- ::= { oriNATStaticPortBindTableEntry 3 }
-
- oriNATStaticPortBindEndPortNumber OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the end port number for this NAT Static
- Port bind Table entry."
- ::= { oriNATStaticPortBindTableEntry 4 }
-
- oriNATStaticPortBindPortType OBJECT-TYPE
- SYNTAX INTEGER
- {
- tcp(1),
- udp(2),
- both(3)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the port type for this NAT Static
- Port bind Table entry."
- ::= { oriNATStaticPortBindTableEntry 5 }
-
- oriNATStaticPortBindTableEntryStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2),
- delete(3),
- create(4)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "The object indicates the status of the NAT Static Port Bind
- Table entry."
- ::= { oriNATStaticPortBindTableEntry 6 }
-
- --=============================================================================
- -- The SpectraLink VoIP Group: orinocoSpectraLink
- --=============================================================================
-
- oriSpectraLinkStatus OBJECT-TYPE
- SYNTAX ObjStatus
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable the SpectraLink VoIP
- feature."
- DEFVAL { disable }
- ::= { orinocoSpectraLink 1 }
-
- oriSpectraLinkLegacyDeviceSupport OBJECT-TYPE
- SYNTAX ObjStatus
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable/disable SpectraLink VoIP support for
- legacy SpectraLink devices/phones."
- DEFVAL { disable }
- ::= { orinocoSpectraLink 2 }
-
- --=============================================================================
- -- The VLAN Group: orinocoVLAN
- --=============================================================================
-
- oriVLANStatus OBJECT-TYPE
- SYNTAX ObjStatus
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable the VLAN feature."
- DEFVAL { disable }
- ::= { orinocoVLAN 1 }
-
- oriVLANMgmtIdentifier OBJECT-TYPE
- SYNTAX VlanId
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the VLAN management Identifier (ID)."
- DEFVAL { -1 }
- ::= { orinocoVLAN 2 }
-
- oriVLANIDTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriVLANIDTableEntry
- MAX-ACCESS not-accessible
- STATUS deprecated
- DESCRIPTION
- "This table is used to configure the VLAN IDs for the device. This
- table has been deprecated."
- ::= { orinocoVLAN 3 }
-
- oriVLANIDTableEntry OBJECT-TYPE
- SYNTAX OriVLANIDTableEntry
- MAX-ACCESS not-accessible
- STATUS deprecated
- DESCRIPTION
- "This object represents an entry in the respective table. In this
- case each table entry represents a VLAN ID. This object has been
- deprecated."
- INDEX { oriVLANIDTableIndex }
- ::= { oriVLANIDTable 1 }
-
- OriVLANIDTableEntry ::=
- SEQUENCE
- {
- oriVLANIDTableIndex Integer32,
- oriVLANIDTableIdentifier VlanId
- }
-
- oriVLANIDTableIndex OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS deprecated
- DESCRIPTION
- "This object represents the index to the VLAN ID Table. This object
- has been deprecated."
- ::= { oriVLANIDTableEntry 1 }
-
- oriVLANIDTableIdentifier OBJECT-TYPE
- SYNTAX VlanId
- MAX-ACCESS read-write
- STATUS deprecated
- DESCRIPTION
- "This object represents the VLAN Identifier (ID). This object has been
- deprecated."
- DEFVAL { 0 }
- ::= { oriVLANIDTableEntry 2 }
-
- --=============================================================================
- -- The DMZ Group: orinocoDMZ
- --=============================================================================
-
- oriDMZHostTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriDMZHostTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "A table containing DMZ host IP information.
- Only if the system is in Gateway mode, and the NAT is enabled,
- and this table has valid 'enabled' entry, the DMZ takes effect."
- ::= { orinocoDMZ 1 }
-
- oriDMZHostTableEntry OBJECT-TYPE
- SYNTAX OriDMZHostTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents an entry in the DMZ host IP Table."
- INDEX { oriDMZHostTableIndex }
- ::= { oriDMZHostTable 1 }
-
- OriDMZHostTableEntry ::=
- SEQUENCE
- {
- oriDMZHostTableIndex Integer32,
- oriDMZHostTableHostIP IpAddress,
- oriDMZHostTableComment DisplayString,
- oriDMZHostTableEntryStatus INTEGER
- }
-
- oriDMZHostTableIndex OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used as the index for the DMZ host IP Table."
- ::= { oriDMZHostTableEntry 1 }
-
- oriDMZHostTableHostIP OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the DMZ host IP address."
- ::= { oriDMZHostTableEntry 2 }
-
- oriDMZHostTableComment OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This objecgt is used for an optional comment associated to the
- DMZ host IP Table entry."
- ::= { oriDMZHostTableEntry 3 }
-
- oriDMZHostTableEntryStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2),
- delete(3),
- create(4)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "The object indicates the status of the DMZ host IP Table entry."
- ::= { oriDMZHostTableEntry 4 }
-
- --=============================================================================
- -- The OEM Group: orinocoOEM
- --=============================================================================
-
- oriOEMName OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object is used to specify the OEM name."
- ::= { orinocoOEM 1 }
-
- oriOEMHomeUrl OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to specify the OEM home URL."
- ::= { orinocoOEM 2 }
-
- oriOEMProductName OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the product name. It is the same name as
- shown in all management Web pages."
- ::= { orinocoOEM 3 }
-
- oriOEMProductModel OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the product model."
- ::= { orinocoOEM 4 }
-
- oriOEMLogoImageFile OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the name of logo image file."
- ::= { orinocoOEM 5 }
-
- oriOEMNoNavLogoImageFile OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the name of no nav. logo image file."
- ::= { orinocoOEM 6 }
-
- --=============================================================================
- -- The Station Statistics Group: orinocoStationsStatistics
- --=============================================================================
-
- oriStationStatTable OBJECT-TYPE
- SYNTAX SEQUENCE OF OriStationStatTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This table contains wireless stations statistics."
- ::= { orinocoStationStatistics 1 }
-
- oriStationStatTableEntry OBJECT-TYPE
- SYNTAX OriStationStatTableEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "This object represents an entry in the respective table. In this
- case each table entry represents a wireless station."
- INDEX { oriStationStatTableIndex }
- ::= { oriStationStatTable 1 }
-
- OriStationStatTableEntry ::=
- SEQUENCE
- {
- oriStationStatTableIndex Integer32,
- oriStationStatTableMACAddress MacAddress,
- oriStationStatTableIPAddress IpAddress,
- oriStationStatTableInterface Integer32,
- oriStationStatTableName DisplayString,
- oriStationStatTableType INTEGER,
- oriStationStatTableMACProtocol INTEGER,
- oriStationStatTableAdminStatus INTEGER,
- oriStationStatTableOperStatus INTEGER,
- oriStationStatTableLastChange TimeTicks,
- oriStationStatTableLastState INTEGER,
- oriStationStatTableInOctets Counter32,
- oriStationStatTableInUcastPkts Counter32,
- oriStationStatTableInNUcastPkts Counter32,
- oriStationStatTableInDiscards Counter32,
- oriStationStatTableOutOctets Counter32,
- oriStationStatTableOutUcastPkts Counter32,
- oriStationStatTableOutNUcastPkts Counter32,
- oriStationStatTableOutDiscards Counter32,
- oriStationStatTableInSignal Integer32,
- oriStationStatTableInNoise Integer32,
- oriStationStatTableRemoteSignal Integer32,
- oriStationStatTableRemoteNoise Integer32,
- oriStationStatTableLastInPktTime TimeTicks
- }
-
- oriStationStatTableIndex OBJECT-TYPE
- SYNTAX Integer32 (0..500)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the index of the stations statistics
- table. This table is limited to 500 entries."
- ::= { oriStationStatTableEntry 1 }
-
- oriStationStatTableMACAddress OBJECT-TYPE
- SYNTAX MacAddress
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the MAC address of the station for which
- the statistics are gathered."
- ::= { oriStationStatTableEntry 2 }
-
- oriStationStatTableIPAddress OBJECT-TYPE
- SYNTAX IpAddress
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the IP address of the stations for which
- the statistics are gathered. If the IP address is not known,
- 0.0.0.0 will be returned."
- ::= { oriStationStatTableEntry 3 }
-
- oriStationStatTableInterface OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of the interface on which the
- station is last seen."
- ::= { oriStationStatTableEntry 4 }
-
- oriStationStatTableName OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the name of the station. If the name is
- not known, an empty string will be returned."
- ::= { oriStationStatTableEntry 5 }
-
- oriStationStatTableType OBJECT-TYPE
- SYNTAX INTEGER
- {
- sta(1),
- wds(2),
- worpBase(3),
- worpSatellite(4),
- norc(5)
- }
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the type of station."
- ::= { oriStationStatTableEntry 6 }
-
- oriStationStatTableMACProtocol OBJECT-TYPE
- SYNTAX INTEGER
- {
- ieee802dot11(1),
- ieee802dot11a(2),
- ieee802dot11b(3),
- worp(4),
- ieee802dot11g(5)
- }
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the MAC protocol for this station."
- ::= { oriStationStatTableEntry 7 }
-
- oriStationStatTableAdminStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- up(1),
- down(2),
- testing(3)
- }
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the administrative state for the station.
- The testing(3) state indicates that no operational packets can
- be passed."
- ::= { oriStationStatTableEntry 8 }
-
- oriStationStatTableOperStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- up(1),
- down(2),
- testing(3)
- }
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the current operational state of the
- interface. The testing(3) state indicates that no operational
- packets can be passed."
- ::= { oriStationStatTableEntry 9 }
-
- oriStationStatTableLastChange OBJECT-TYPE
- SYNTAX TimeTicks
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the value of sysUpTime at the time the
- station entered its current operational state. If the current
- state was entered prior to the last re-initialization of the
- local network management subsystem, then this object contains a
- zero value."
- ::= { oriStationStatTableEntry 10 }
-
- oriStationStatTableLastState OBJECT-TYPE
- SYNTAX INTEGER
- {
- unknown(1),
- registering(2),
- authenticating(3),
- registered(4),
- timeout(5),
- aborded(6),
- rejected(7),
- linktest(8)
- }
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the last state of this station."
- ::= { oriStationStatTableEntry 11 }
-
- oriStationStatTableInOctets OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "The total number of octets received from the station,
- including framing characters."
- ::= { oriStationStatTableEntry 12 }
-
- oriStationStatTableInUcastPkts OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of unicast packets from the
- station that are further processed by either by the bridge/router
- or by the internal host."
- ::= { oriStationStatTableEntry 13 }
-
- oriStationStatTableInNUcastPkts OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of non-unicast packets
- (i.e. broadcast or multicast) from the station that are further
- processed by either by the bridge/router or by the internal host."
- ::= { oriStationStatTableEntry 14 }
-
- oriStationStatTableInDiscards OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of inbound packets which were
- chosen to be discarded even though no errors had been detected to
- prevent their being deliverable to the internal bridge/router or
- the internal host. One possible reason for discarding such a
- packet could be to lack of buffer space."
- ::= { oriStationStatTableEntry 15 }
-
- oriStationStatTableOutOctets OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the total number of octets send to the
- station, including framing characters."
- ::= { oriStationStatTableEntry 16 }
-
- oriStationStatTableOutUcastPkts OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of packets that the internal
- bridge/router or the internal host requested be transmitted to the
- station, including those that were discarded or not sent."
- ::= { oriStationStatTableEntry 17 }
-
- oriStationStatTableOutNUcastPkts OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of packets that the internal
- bridge/router or the internal host requested be transmitted to a
- non-unicast (i.e. broadcast or multicast) address that includes
- the station. This counter includes those packets that were
- discarded or not sent."
- ::= { oriStationStatTableEntry 18 }
-
- oriStationStatTableOutDiscards OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of outbound packets which were
- chosen to be discarded even though no errors had been detected to
- prevent their being deliverable to the internal bridge/router or
- the internal host. One possible reason for discarding such a
- packet could be to lack of buffer space."
- ::= { oriStationStatTableEntry 19 }
-
- oriStationStatTableInSignal OBJECT-TYPE
- SYNTAX Integer32 (-102..-10)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the current signal level calculated over
- the inbound packets from this station. This variable indicates
- the running average of the local signal level using the algorithm
- (3/4*oldvalue + 1/4*newvalue)."
- ::= { oriStationStatTableEntry 20 }
-
- oriStationStatTableInNoise OBJECT-TYPE
- SYNTAX Integer32 (-102..-10)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the current noise level calculated over
- the inbound packets from this station. This variable indicates
- the running average of the local noise level using the algorithm
- (3/4*oldvalue + 1/4*newvalue)."
- ::= { oriStationStatTableEntry 21 }
-
- oriStationStatTableRemoteSignal OBJECT-TYPE
- SYNTAX Integer32 (-102..-10)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the current remote signal level calculated
- over the inbound packets from this station on the remote station.
- This variable indicates the running average of the remote signal
- level using the algorithm (3/4*oldvalue + 1/4*newvalue)."
- ::= { oriStationStatTableEntry 22 }
-
- oriStationStatTableRemoteNoise OBJECT-TYPE
- SYNTAX Integer32 (-102..-10)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the current remote noise level calculated
- over the inbound packets from this station on the remote station.
- This variable indicates the running average of the remote noise
- level using the algorithm (3/4*oldvalue + 1/4*newvalue)."
- ::= { oriStationStatTableEntry 23 }
-
- oriStationStatTableLastInPktTime OBJECT-TYPE
- SYNTAX TimeTicks
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the value of sysUpTime at the time the
- last packet from the remote station was received."
- ::= { oriStationStatTableEntry 24 }
-
- oriStationStatStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable the monitoring of the
- wireless station statistics."
- DEFVAL { disable }
- ::= { orinocoStationStatistics 2 }
-
- oriStationStatNumberOfClients OBJECT-TYPE
- SYNTAX Counter32
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the number of active wireless clients
- associated to the access point."
- ::= { orinocoStationStatistics 3 }
-
- --=============================================================================
- -- The Simple Network Time Protocol (SNTP) Group: orinocoSNTP
- --=============================================================================
-
- oriSNTPStatus OBJECT-TYPE
- SYNTAX INTEGER
- {
- enable(1),
- disable(2)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object is used to enable or disable the SNTP functionality."
- DEFVAL { disable }
- ::= { orinocoSNTP 1 }
-
- oriSNTPPrimaryServerNameOrIPAddress OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the primary SNTP server IP address or host
- name."
- ::= { orinocoSNTP 2 }
-
- oriSNTPSecondaryServerNameOrIPAddress OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the secondary SNTP server IP address or host
- name."
- ::= { orinocoSNTP 3 }
-
- oriSNTPTimeZone OBJECT-TYPE
- SYNTAX INTEGER
- {
- dateline(1),
- samoa(2),
- hawaii(3),
- alaska(4),
- pacific-us(5),
- mountain-us(6),
- arizona(7),
- central-us(8),
- mexico-city(9),
- eastern-us(10),
- indiana(11),
- atlantic-canada(12),
- santiago(13),
- newfoundland(14),
- brasilia(15),
- buenos-aires(16),
- mid-atlantic(17),
- azores(18),
- london(19),
- western-europe(20),
- eastern-europe(21),
- cairo(22),
- russia-iraq(23),
- iran(24),
- arabian(25),
- afghanistan(26),
- pakistan(27),
- india(28),
- bangladesh(29),
- burma(30),
- bangkok(31),
- australia-wt(32),
- hong-kong(33),
- beijing(34),
- japan-korea(35),
- australia-ct(36),
- australia-et(37),
- central-pacific(38),
- new-zealand(39),
- tonga(40),
- western-samoa(41)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This parameter is used for the device to know how to adjust GMT for
- local time."
- ::= { orinocoSNTP 4 }
-
- oriSNTPDateAndTime OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "This object represents the Date and Time. The format of this object
- is the same as the DateAndTime textual convention."
- ::= { orinocoSNTP 5 }
-
- oriSNTPDayLightSavingTime OBJECT-TYPE
- SYNTAX INTEGER
- {
- plus-two(1),
- plus-one(2),
- unchanged(3),
- minus-one(4),
- minus-two(5)
- }
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This parameter indicates the number of hours to adjust for
- Daylight Saving Time."
- DEFVAL { unchanged }
- ::= { orinocoSNTP 6 }
-
- oriSNTPYear OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the year. This object can be used to manually
- configure the year in case the Date and Time is not retrieved from an
- SNTP server."
- ::= { orinocoSNTP 7 }
-
- oriSNTPMonth OBJECT-TYPE
- SYNTAX Integer32 (1..12)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the month. This object can be used to manually
- configure the month in case the Date and Time is not retrieved from an
- SNTP server."
- ::= { orinocoSNTP 8 }
-
- oriSNTPDay OBJECT-TYPE
- SYNTAX Integer32 (1..31)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the day of the month. This object can be used
- to manually configure the year in case the Date and Time is not
- retrieved from an SNTP server."
- ::= { orinocoSNTP 9 }
-
- oriSNTPHour OBJECT-TYPE
- SYNTAX Integer32 (0..23)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the hour of day. This object can be used
- to manually configure the hour in case the Date and Time is not
- retrieved from an SNTP server."
- ::= { orinocoSNTP 10 }
-
- oriSNTPMinutes OBJECT-TYPE
- SYNTAX Integer32 (0..59)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the minutes. This object can be used to
- manually configure the minutes in case the Date and Time is not
- retrieved from an SNTP server."
- ::= { orinocoSNTP 11 }
-
- oriSNTPSeconds OBJECT-TYPE
- SYNTAX Integer32 (0..59)
- MAX-ACCESS read-write
- STATUS current
- DESCRIPTION
- "This object represents the number of seconds. This object can be used
- to manually configure the seconds in case the Date and Time is not
- retrieved from an SNTP server."
- ::= { orinocoSNTP 12 }
-
- --=============================================================================
- -- The Configuration Related Trap Group: oriConfigurationTraps
- --=============================================================================
-
- oriConfigurationTraps OBJECT-IDENTITY
- STATUS current
- DESCRIPTION
- "This is the configuration related trap/notification group."
- ::= { orinocoTrap 2 }
-
- oriTrapDNSIPNotConfigured NOTIFICATION-TYPE
- OBJECTS { oriGenericTrapVariable, oriTrapVarMACAddress }
- STATUS current
- DESCRIPTION
- "This traps is generated when the DNS IP Address has not been
- configured.
- Trap Severity Level: Major."
- ::= { oriConfigurationTraps 0 3 }
-
- oriTrapRADIUSAuthenticationNotConfigured NOTIFICATION-TYPE
- OBJECTS { oriGenericTrapVariable, oriTrapVarMACAddress }
- STATUS current
- DESCRIPTION
- "This trap is generated when the RADIUS authentication information
- has not been configured.
- Trap Severity Level: Major."
- ::= { oriConfigurationTraps 0 5 }
-
- oriTrapRADIUSAccountingNotConfigured NOTIFICATION-TYPE
- OBJECTS { oriGenericTrapVariable, oriTrapVarMACAddress }
- STATUS current
- DESCRIPTION
- "This trap is generated when the RADIUS accounting information
- has not been configured.
- Trap Severity Level: Major."
- ::= { oriConfigurationTraps 0 6 }
-
- oriTrapDuplicateIPAddressEncountered NOTIFICATION-TYPE
- OBJECTS { oriGenericTrapVariable, oriTrapVarMACAddress }
- STATUS current
- DESCRIPTION
- "This trap is generated when the device has encountered another
- network device with he same IP Address.
- Trap Severity Level: Major."
- ::= { oriConfigurationTraps 0 7 }
-
- oriTrapDHCPRelayServerTableNotConfigured NOTIFICATION-TYPE
- STATUS current
- DESCRIPTION
- "This trap is generated when the DHCP relay agent server table is
- empty or not configured.
- Trap Severity Level: Major."
- ::= { oriConfigurationTraps 0 8 }
-
- oriTrapWORPIfNetworkSecretNotConfigured NOTIFICATION-TYPE
- STATUS current
- DESCRIPTION
- "This trap is generated when the system network authentication
- shared secret is not configured.
- Trap Severity Level: Major."
- ::= { oriConfigurationTraps 0 9 }
-
- oriTrapVLANIDInvalidConfiguration NOTIFICATION-TYPE
- OBJECTS { oriGenericTrapVariable, oriWirelessIfNetworkName,
- oriVLANIDTableIdentifier }
- STATUS current
- DESCRIPTION
- "This trap is generated when a VLAN ID configuration is invalid.
- Trap Severity Level: Major."
- ::= { oriConfigurationTraps 0 10 }
-
- oriTrapAutoConfigFailure NOTIFICATION-TYPE
- OBJECTS { oriGenericTrapVariable, oriTFTPAutoConfigFilename,
- oriTFTPAutoConfigServerIPAddress }
- STATUS current
- DESCRIPTION
- "This trap is generated when the auto configuration failed.
- Trap Severity Level: Minor."
- ::= { oriConfigurationTraps 0 11 }
-
- oriTrapBatchExecFailure NOTIFICATION-TYPE
- OBJECTS { oriGenericTrapVariable, oriTrapVarBatchCLIFilename,
- oriTrapVarBatchCLILineNumber, oriTrapVarBatchCLIMessage}
- STATUS current
- DESCRIPTION
- "This trap is generated when the CLI Batch execution fails for the
- following reasons.
- - Illegal Command is parsed in the CLI Batch File.
- - Execution error is encountered while executing CLI Batch file.
- - Bigger File Size than 100 Kbytes
- Trap Severity Level: Minor."
- ::= { oriConfigurationTraps 0 12 }
-
- oriTrapBatchFileExecStart NOTIFICATION-TYPE
- OBJECTS { oriGenericTrapVariable, oriTrapVarBatchCLIFilename}
- STATUS current
- DESCRIPTION
- "This trap is generated when the CLI Batch execution begins after
- file is uploaded.
- Trap Severity Level: Minor."
- ::= { oriConfigurationTraps 0 13 }
-
- oriTrapBatchFileExecEnd NOTIFICATION-TYPE
- OBJECTS { oriGenericTrapVariable, oriTrapVarBatchCLIFilename,
- oriTrapVarBatchCLIMessage }
- STATUS current
- DESCRIPTION
- "This trap is generated when the execution of CLI Batch File Ends.
- Trap Severity Level: Minor."
- ::= { oriConfigurationTraps 0 14 }
-
- --=============================================================================
- -- The Security Related Trap Group: oriSecurityTraps
- --=============================================================================
-
- oriSecurityTraps OBJECT-IDENTITY
- STATUS current
- DESCRIPTION
- "This is the security related trap/notification group."
- ::= { orinocoTrap 3 }
-
- oriTrapInvalidEncryptionKey NOTIFICATION-TYPE
- OBJECTS { oriTrapVarUnauthorizedClientMACAddress }
- STATUS current
- DESCRIPTION
- "This trap is generated when an invalid encryption key has been
- detected.
- Trap Severity Level: Critical."
- ::= { oriSecurityTraps 0 1 }
-
- oriTrapAuthenticationFailure NOTIFICATION-TYPE
- OBJECTS { oriTrapVarUnauthorizedClientMACAddress,
- oriTrapVarFailedAuthenticationType }
- STATUS current
- DESCRIPTION
- "This trap is generated when a client authentication failure
- has occurred. The authentication failures can range from:
- - MAC Access Control Table
- - RADIUS MAC Authentication
- - 802.1x Authentication specifying the EAP-Type
- - WORP Mutual Authentication
- - SSID Authorization Failure specifying the SSID
- - VLAN ID Authorization Failure specifying the VLAN ID
- Trap Severity Level: Major."
- ::= { oriSecurityTraps 0 2 }
-
- oriTrapUnauthorizedManagerDetected NOTIFICATION-TYPE
- OBJECTS { oriTrapVarUnauthorizedManagerIPaddress,
- oriTrapVarUnAuthorizedManagerCount }
- STATUS current
- DESCRIPTION
- "This trap is generated when an unauthorized manager has
- attempted to view and/or modify parameters.
- Trap Severity Level: Major."
- ::= { oriSecurityTraps 0 3 }
-
- oriTrapRADScanComplete NOTIFICATION-TYPE
- OBJECTS { oriGenericTrapVariable }
- STATUS current
- DESCRIPTION
- "This trap is generated when an a RAD scan is successfully completed.
- Trap Severity Level: Informational."
- ::= { oriSecurityTraps 0 4 }
-
- oriTrapRADScanResults NOTIFICATION-TYPE
- OBJECTS { oriGenericTrapVariable }
- STATUS current
- DESCRIPTION
- "This trap is generated in order to provide information on the RAD
- Scan results.
- Trap Severity Level: Informational."
- ::= { oriSecurityTraps 0 5 }
-
- oriTrapRogueScanStationDetected NOTIFICATION-TYPE
- OBJECTS { oriGenericTrapVariable }
- STATUS current
- DESCRIPTION
- "This trap is generated when a rogue station is detected.
- Trap Severity Level: Informational."
- ::= { oriSecurityTraps 0 6 }
-
- oriTrapRogueScanCycleComplete NOTIFICATION-TYPE
- OBJECTS { oriGenericTrapVariable }
- STATUS current
- DESCRIPTION
- "This trap is generated when an a rogue scan is successfully completed.
- Trap Severity Level: Informational."
- ::= { oriSecurityTraps 0 7 }
-
- --=============================================================================
- -- The Wireless Interface Card Related Trap Group: oriWirelessIfTraps
- --=============================================================================
-
- oriWirelessIfTraps OBJECT-IDENTITY
- STATUS current
- DESCRIPTION
- "This is the wireless interface or wireless card related
- trap/notification group."
- ::= { orinocoTrap 4 }
-
- oriTrapWLCNotPresent NOTIFICATION-TYPE
- OBJECTS { oriTrapVarWirelessCard }
- STATUS current
- DESCRIPTION
- "This trap is generated when a wireless interface/card is not
- present in the device.
- Trap Severity Level: Informational."
- ::= { oriWirelessIfTraps 0 1 }
-
- oriTrapWLCFailure NOTIFICATION-TYPE
- OBJECTS { oriTrapVarWirelessCard }
- STATUS current
- DESCRIPTION
- "This trap is generated when a general failure has occured with
- the wireless interface/card.
- Trap Severity Level: Critical."
- ::= { oriWirelessIfTraps 0 2 }
-
- oriTrapWLCRemoval NOTIFICATION-TYPE
- OBJECTS { oriTrapVarWirelessCard }
- STATUS current
- DESCRIPTION
- "This trap is generated when the wireless interface/card has been
- removed from the device.
- Trap Severity Level: Critical."
- ::= { oriWirelessIfTraps 0 3 }
-
- oriTrapWLCIncompatibleFirmware NOTIFICATION-TYPE
- OBJECTS { oriTrapVarWirelessCard }
- STATUS current
- DESCRIPTION
- "This trap is generated when the firmware of the wireless
- interface/card is incompatible.
- Trap Severity Level: Critical."
- ::= { oriWirelessIfTraps 0 4 }
-
- oriTrapWLCVoltageDiscrepancy NOTIFICATION-TYPE
- OBJECTS { oriTrapVarWirelessCard }
- STATUS current
- DESCRIPTION
- "This trap is generated when a non 5 volt card or 3.3 volt
- wireless interface/card is inserted in the device.
- Trap Severity Level: Critical."
- ::= { oriWirelessIfTraps 0 5 }
-
- oriTrapWLCIncompatibleVendor NOTIFICATION-TYPE
- OBJECTS { oriTrapVarWirelessCard }
- STATUS current
- DESCRIPTION
- "This trap is generated when an incompatible wireless vendor card
- is inserted or present in the device.
- Trap Severity Level: Critical."
- ::= { oriWirelessIfTraps 0 6 }
-
- oriTrapWLCFirmwareDownloadFailure NOTIFICATION-TYPE
- OBJECTS { oriTrapVarWirelessCard }
- STATUS current
- DESCRIPTION
- "This trap is generated when a failure occurs during the firmware
- download process of the wireless interface/card.
- Trap Severity Level: Critical."
- ::= { oriWirelessIfTraps 0 7 }
-
- oriTrapWLCFirmwareFailure NOTIFICATION-TYPE
- OBJECTS { oriTrapVarWirelessCard, oriGenericTrapVariable }
- STATUS current
- DESCRIPTION
- "This trap is generated when a failure occurs in the wireless
- interface/card firmware.
- Trap Severity Level: Critical."
- ::= { oriWirelessIfTraps 0 8 }
-
- oriTrapWLCRadarInterferenceDetected NOTIFICATION-TYPE
- OBJECTS { oriTrapVarWirelessCard, oriGenericTrapVariable }
- STATUS current
- DESCRIPTION
- "This trap is generated when radar interference is detected on the
- channel being used by the wireless interface. The generic trap
- varible provides information on the channel where interference
- was detected.
- Trap Severity Level: Major."
- ::= { oriWirelessIfTraps 0 9 }
-
- --=============================================================================
- -- The Operational Related Trap Group: oriOperationalTraps
- --=============================================================================
-
- oriOperationalTraps OBJECT-IDENTITY
- STATUS current
- DESCRIPTION
- "This is the operational related trap group group."
- ::= { orinocoTrap 5 }
-
- oriTrapUnrecoverableSoftwareErrorDetected NOTIFICATION-TYPE
- OBJECTS { oriGenericTrapVariable, oriTrapVarMACAddress,
- oriTrapVarTaskSuspended }
- STATUS current
- DESCRIPTION
- "This trap is generated when an unrecoverable software error has
- been detected. This trap can signify that a problem/error has occurred
- with one or more software modules. This error would cause the software
- watch dog timer to expire which would then cause the device to reboot.
- Trap Severity Level: Critical."
- ::= { oriOperationalTraps 0 1 }
-
- oriTrapRADIUSServerNotResponding NOTIFICATION-TYPE
- OBJECTS { oriGenericTrapVariable }
- STATUS current
- DESCRIPTION
- "This trap is generated when no response is received from the
- RADIUS server(s) for authentication requests sent from the RADIUS
- client in the device.
- Trap Severity Level: Major."
- ::= { oriOperationalTraps 0 2 }
-
- oriTrapModuleNotInitialized NOTIFICATION-TYPE
- OBJECTS { oriGenericTrapVariable }
- STATUS current
- DESCRIPTION
- "This trap is generated when a certain software or hardware module
- has not been initialized or failed to be initialized.
- Trap Severity Level: Major."
- ::= { oriOperationalTraps 0 3 }
-
- oriTrapDeviceRebooting NOTIFICATION-TYPE
- OBJECTS { oriTrapVarMACAddress, oriGenericTrapVariable,
- oriSystemReboot }
- STATUS current
- DESCRIPTION
- "This trap is generated when the device has received a request
- to be rebooted.
- Trap Severity Level: Informational."
- ::= { oriOperationalTraps 0 5 }
-
- oriTrapTaskSuspended NOTIFICATION-TYPE
- OBJECTS { oriTrapVarTaskSuspended }
- STATUS current
- DESCRIPTION
- "This trap is generated when a task in the device has suspended.
- Trap Severity Level: Critical."
- ::= { oriOperationalTraps 0 6 }
-
- oriTrapBootPFailed NOTIFICATION-TYPE
- OBJECTS { oriTrapVarMACAddress }
- STATUS current
- DESCRIPTION
- "This trap is generated when a response to the BootP request is
- not received, hence the access point device is not dynamically
- assigned an IP Address.
- Trap Severity Level: Major."
- ::= { oriOperationalTraps 0 7 }
-
- oriTrapDHCPFailed NOTIFICATION-TYPE
- OBJECTS { oriTrapVarMACAddress }
- STATUS current
- DESCRIPTION
- "This trap is generated when a response to the DHCP client request
- is not received, hence the access point device is not dynamically
- assigned an IP Address.
- Trap Severity Level: Major."
- ::= { oriOperationalTraps 0 8 }
-
- oriTrapDNSClientLookupFailure NOTIFICATION-TYPE
- OBJECTS { oriGenericTrapVariable }
- STATUS current
- DESCRIPTION
- "This trap is generated when the DNS client attempts to resolve a
- specified hostname (DNS lookup) and a failure occurs. This could be
- the result of the DNS server being unreachable or returning an error
- for the hostname lookup. This trap specified the hostname that was
- being resolved.
- Trap Severity Level: Major."
- ::= { oriOperationalTraps 0 9 }
-
- oriTrapSNTPFailure NOTIFICATION-TYPE
- STATUS current
- DESCRIPTION
- "This trap is generated when SNTP service is enabled and no response
- is received from the configured SNTP servers.
- Trap Severity Level: Major."
- ::= { oriOperationalTraps 0 10 }
-
- oriTrapMaximumNumberOfSubscribersReached NOTIFICATION-TYPE
- STATUS current
- DESCRIPTION
- "This trap is generated when maximum number of suscribers has been
- reached.
- Trap Severity Level: Major."
- ::= { oriOperationalTraps 0 11 }
-
- oriTrapSSLInitializationFailure NOTIFICATION-TYPE
- STATUS current
- DESCRIPTION
- "This trap is generated when the SSL initialization fails.
- Trap Severity Level: Major."
- ::= { oriOperationalTraps 0 12 }
-
- oriTrapWirelessServiceShutdown NOTIFICATION-TYPE
- OBJECTS { oriTrapVarWirelessCard }
- STATUS current
- DESCRIPTION
- "This trap is generated when the Wireless Service Shutdown object is
- configured to down; in other words the wireless interface has shutdown
- services for wireless clients.
- Trap Severity Level: Informational."
- ::= { oriOperationalTraps 0 13 }
-
- oriTrapWirelessServiceResumed NOTIFICATION-TYPE
- OBJECTS { oriTrapVarWirelessCard }
- STATUS current
- DESCRIPTION
- "This trap is generated when the Wireless Service Shutdown object is
- configured to up; in other words the wireless interface has resumed
- service and is ready for wireless client connections.
- Trap Severity Level: Informational."
- ::= { oriOperationalTraps 0 14 }
-
- oriTrapSSHInitializationStatus NOTIFICATION-TYPE
- OBJECTS { oriGenericTrapVariable }
- STATUS current
- DESCRIPTION
- "This trap is generated to provide information on SSH initialization.
- Trap Severity Level: Major."
- ::= { oriOperationalTraps 0 15 }
-
- oriTrapVLANIDUserAssignment NOTIFICATION-TYPE
- OBJECTS { oriGenericTrapVariable }
- STATUS current
- DESCRIPTION
- "This trap is generated when a user gets assigned a VLAN ID from the
- RADIUS server.
- Trap Severity Level: Informational."
- ::= { oriOperationalTraps 0 16 }
-
- oriTrapDHCPLeaseRenewal NOTIFICATION-TYPE
- OBJECTS { oriTrapVarDHCPServerIPAddress,
- oriTrapVarIPAddress,
- oriTrapVarSubnetMask,
- oriTrapVarDefaultRouterIPAddress }
- STATUS current
- DESCRIPTION
- "This trap is generated when the access point does a DHCP renewal
- request and receives new information from the DHCP server.
- The variables/objects bound to this trap will provide information on
- the DHCP server IP address that replied to the DHCP client request, and
- the IP address, subnet mask, and gateway IP address returned from the
- DHCP server.
- Trap Severity Level: Informational."
- ::= { oriOperationalTraps 0 17 }
-
- oriTrapTemperatureAlert NOTIFICATION-TYPE
- OBJECTS { oriGenericTrapVariable, oriUnitTemp }
- STATUS current
- DESCRIPTION
- "This trap is generated when the temperature crosses the limit of -30
- to 60 degrees celsius.
- Trap Severity Level: Major."
- ::= { oriOperationalTraps 0 18 }
-
- --=============================================================================
- -- The Flash Memory Related Trap Group: oriFlashTraps
- --=============================================================================
-
- oriFlashTraps OBJECT-IDENTITY
- STATUS current
- DESCRIPTION
- "This is the flash memory related trap group."
- ::= { orinocoTrap 6 }
-
- oriTrapFlashMemoryEmpty NOTIFICATION-TYPE
- STATUS current
- DESCRIPTION
- "This trap is generated when there is no data present in flash
- memory - either on the flash card or the onboard flash memory.
- Trap Severity Level: Informational."
- ::= { oriFlashTraps 0 1 }
-
- oriTrapFlashMemoryCorrupted NOTIFICATION-TYPE
- OBJECTS { oriGenericTrapVariable }
- STATUS current
- DESCRIPTION
- "This trap is generated when the data content of flash memory is
- corrupted.
- Trap Severity Level: Critical."
- ::= { oriFlashTraps 0 2 }
-
- oriTrapFlashMemoryRestoringLastKnownGoodConfiguration NOTIFICATION-TYPE
- STATUS current
- DESCRIPTION
- "This trap is generated when the current/original configuration data
- file is found to be corrupted, therefore the device will load the last
- known good configuration file.
- Trap Severity Level: Informational."
- ::= { oriFlashTraps 0 3 }
-
- --=============================================================================
- -- The TFTP Related Trap Group: oriTFTPTraps
- --=============================================================================
-
- oriTFTPTraps OBJECT-IDENTITY
- STATUS current
- DESCRIPTION
- "This is the TFTP related trap group."
- ::= { orinocoTrap 7 }
-
- oriTrapTFTPFailedOperation NOTIFICATION-TYPE
- OBJECTS { oriTrapVarTFTPIPAddress, oriTrapVarTFTPFilename,
- oriTrapVarTFTPOperation }
- STATUS current
- DESCRIPTION
- "This trap is generated when a failure has occurred with the TFTP
- operation.
- Trap Severity Level: Major."
- ::= { oriTFTPTraps 0 1 }
-
- oriTrapTFTPOperationInitiated NOTIFICATION-TYPE
- OBJECTS { oriTrapVarTFTPIPAddress, oriTrapVarTFTPFilename,
- oriTrapVarTFTPOperation }
- STATUS current
- DESCRIPTION
- "This trap is generated when a TFTP operation has been initiated.
- Trap Severity Level: Informational."
- ::= { oriTFTPTraps 0 2 }
-
- oriTrapTFTPOperationCompleted NOTIFICATION-TYPE
- OBJECTS { oriTrapVarTFTPIPAddress, oriTrapVarTFTPFilename,
- oriTrapVarTFTPOperation }
- STATUS current
- DESCRIPTION
- "This trap is generated when a TFTP operation has been completed.
- Trap Severity Level: Informational."
- ::= { oriTFTPTraps 0 3 }
-
- --=============================================================================
- -- The Miscellaneous Trap Group: oriMiscTraps
- --=============================================================================
-
- oriMiscTraps OBJECT-IDENTITY
- STATUS current
- DESCRIPTION
- "This is the miscellaneous trap group."
- ::= { orinocoTrap 8 }
-
- --=============================================================================
- -- The Image Related Trap Group: oriImageTraps
- --=============================================================================
-
- oriImageTraps OBJECT-IDENTITY
- STATUS current
- DESCRIPTION
- "This is the image related trap group."
- ::= { orinocoTrap 9 }
-
- oriTrapZeroSizeImage NOTIFICATION-TYPE
- STATUS current
- DESCRIPTION
- "This trap is generated when a zero size image is loaded on the
- device.
- Trap Severity Level: Major."
- ::= { oriImageTraps 0 1 }
-
- oriTrapInvalidImage NOTIFICATION-TYPE
- STATUS current
- DESCRIPTION
- "This trap is generated when an invalid image is loaded on the
- device.
- Trap Severity Level: Major."
- ::= { oriImageTraps 0 2 }
-
- oriTrapImageTooLarge NOTIFICATION-TYPE
- STATUS current
- DESCRIPTION
- "This trap is generated when the image loaded on the device
- exceeds the size limitation of flash.
- Trap Severity Level: Major."
- ::= { oriImageTraps 0 3 }
-
- oriTrapIncompatibleImage NOTIFICATION-TYPE
- STATUS current
- DESCRIPTION
- "This trap is generated when an incompatible image is loaded on
- the device.
- Trap Severity Level: Major."
- ::= { oriImageTraps 0 4 }
-
- oriTrapInvalidImageDigitalSignature NOTIFICATION-TYPE
- STATUS current
- DESCRIPTION
- "This trap is generated when an image with an invalid Digital
- Signature is loaded in the device.
- Trap Severity Level: Major."
- ::= { oriImageTraps 0 5 }
-
- --=============================================================================
- -- The WORP Related Trap Group: oriWORPTraps
- --=============================================================================
-
- oriWORPTraps OBJECT-IDENTITY
- STATUS current
- DESCRIPTION
- "This is the WORP related trap group."
- ::= { orinocoTrap 11 }
-
- oriWORPStationRegister NOTIFICATION-TYPE
- OBJECTS { oriTrapVarInterface, oriTrapVarMACAddress }
- STATUS current
- DESCRIPTION
- "This trap is generated when a WORP satellite has registered on
- and interface of a base; a satellite will not generate this trap,
- but use oriWORPLinkUp instead. For the station indicated, the
- oriStationStatTableOperStatus will be up.
- Trap Severity Level: Informational."
- ::= { oriWORPTraps 0 1 }
-
- oriWORPStationDeRegister NOTIFICATION-TYPE
- OBJECTS { oriTrapVarInterface, oriTrapVarMACAddress }
- STATUS current
- DESCRIPTION
- "This trap is generated when a WORP satellite has been deleted
- from an interface of a base; a satellite will not generate this
- trap, but use oriWORPLinkDown instead. For the station indicated,
- the oriStationStatTableOperStatus will be down.
- Trap Severity Level: Informational."
- ::= { oriWORPTraps 0 2 }
-
- --=============================================================================
- -- The System Feature based License Related Trap Group: oriSysFeatureTraps
- --=============================================================================
-
- oriSysFeatureTraps OBJECT-IDENTITY
- STATUS current
- DESCRIPTION
- "This is the System Feature based License related trap group."
- ::= { orinocoTrap 12 }
-
- oriTrapIncompatibleLicenseFile NOTIFICATION-TYPE
- OBJECTS { oriGenericTrapVariable }
- STATUS current
- DESCRIPTION
- "This trap is generated when a license file in the device's flash
- memory is not compatible with the current bootloader.
- Trap Severity Level: Major."
- ::= { oriSysFeatureTraps 0 1 }
-
- oriTrapFeatureNotSupported NOTIFICATION-TYPE
- OBJECTS { oriSystemFeatureTableCode }
- STATUS current
- DESCRIPTION
- "This trap is generated when a feature present in the license
- codes is not supported by the current embedded software image.
- A newer embedded software image could support the feature or
- there are more license that needed.
- Trap Severity Level: Informational."
- ::= { oriSysFeatureTraps 0 2 }
-
- oriTrapZeroLicenseFiles NOTIFICATION-TYPE
- STATUS current
- DESCRIPTION
- "This trap is generated when a single license file is not present
- in flash. This causes the device to operate in default mode
- with very limited features enabled.
- Trap Severity Level: Critical."
- ::= { oriSysFeatureTraps 0 3 }
-
- oriTrapInvalidLicenseFile NOTIFICATION-TYPE
- OBJECTS { oriGenericTrapVariable }
- STATUS current
- DESCRIPTION
- "This trap is generated when a license file in the device's flash
- memory has an invalid signature and will be ignored.
- Trap Severity Level: Minor."
- ::= { oriSysFeatureTraps 0 4 }
-
- oriTrapUselessLicense NOTIFICATION-TYPE
- OBJECTS { oriGenericTrapVariable }
- STATUS current
- DESCRIPTION
- "This trap is generated when a license code file does not contain
- any valid feature code. The probably reason for this is that
- after verification, not any of the features was meant for this
- units MAC address.
- Trap Severity Level: Informational."
- ::= { oriSysFeatureTraps 0 5 }
-
- --=============================================================================
- -- ORiNOCO MIBs End
- --=============================================================================
-
- END
-